---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Mon 01/31/22: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:00 AM - Weird primer leak (1906) 2. 10:09 AM - Re: Weird primer leak (Anthony Savarese) 3. 10:15 AM - MORE (Re: Weird primer leak) (Anthony Savarese) 4. 07:54 PM - Re: Yak-List Digest: 2 Msgs - 01/30/22 (W LANNON) ________________________________ Message 1 _____________________________________ Time: 10:00:56 AM PST US Subject: Yak-List: Weird primer leak From: "1906" I have a leak from the back of the primer handle and it's been difficult to figure out. I might just end up replacing the whole thing but was curious if anyone has seen this before. The top b-nut is tight. I've taken a number of pictures and I can't see any cracks in the fittings or the tube. https://www.youtube.com/watch?v=TsxCMMe31co Read this topic online here: http://forums.matronics.com/viewtopic.php?p=505859#505859 ________________________________ Message 2 _____________________________________ Time: 10:09:02 AM PST US From: Anthony Savarese Subject: Re: Yak-List: Weird primer leak Look for cracks in the flare under the tubing sleeve inside the B nut. Difficult to see unless you physically remove the B nut and inspect the tubing flare. Dennis Sent from my iPhone > On Jan 31, 2022, at 1:03 PM, 1906 wrote: > > > I have a leak from the back of the primer handle and it's been difficult to figure out. I might just end up replacing the whole thing but was curious if anyone has seen this before. > > The top b-nut is tight. I've taken a number of pictures and I can't see any cracks in the fittings or the tube. > > https://www.youtube.com/watch?v=TsxCMMe31co > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=505859#505859 > > > > > > > > > ________________________________ Message 3 _____________________________________ Time: 10:15:32 AM PST US From: Anthony Savarese Subject: MORE (Re: Yak-List: Weird primer leak) Looking at the video, it appears to be leaking out of the middle of the assembly. The only thing I can think of is if the little ball in the center behind the plate is corroded and stuck. If its stuck it may be the cause of the leak when you pump the primer. Dennis Sent from my iPhone > On Jan 31, 2022, at 1:08 PM, Anthony Savarese wrote: > > Look for cracks in the flare under the tubing sleeve inside the B nut. > Difficult to see unless you physically remove the B nut and inspect the tubing flare. > Dennis > > Sent from my iPhone > >> On Jan 31, 2022, at 1:03 PM, 1906 wrote: >> >> >> I have a leak from the back of the primer handle and it's been difficult to figure out. I might just end up replacing the whole thing but was curious if anyone has seen this before. >> >> The top b-nut is tight. I've taken a number of pictures and I can't see any cracks in the fittings or the tube. >> >> https://www.youtube.com/watch?v=TsxCMMe31co >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=505859#505859 >> >> >> >> >> >> >> >> >> ________________________________ Message 4 _____________________________________ Time: 07:54:11 PM PST US From: W LANNON Subject: Yak-List: Re: Yak-List Digest: 2 Msgs - 01/30/22 From: "Yak-List Digest Server" Sent: Sunday, January 30, 2022 11:50:49 PM Subject: Yak-List Digest: 2 Msgs - 01/30/22 * ================================================== Online Versions of Today's List Digest Archive ================================================== Today's complete Yak-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the Yak-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 22-01-30&Archive=Yak Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 22-01-30&Archive=Yak ================================================ EMail Version of Today's List Digest Archive ================================================ ---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sun 01/30/22: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:37 AM - Front air gauge for a CJ6 (Dave Jester) 2. 08:15 AM - Mixture cable CJ6 (jlpartington@reagan.com) ________________________________ Message 1 _____________________________________ Time: 06:37:48 AM PST US From: Dave Jester Subject: Yak-List: Front air gauge for a CJ6 Morning all, looking for a front cockpit air gauge for a CJ6. Asking for a friend. I drive a Yak. Sent from my iPhone ________________________________ Message 2 _____________________________________ Time: 08:15:00 AM PST US Subject: Yak-List: Mixture cable CJ6 From: jlpartington@reagan.com =0AI am finally finishing up the install on Doug Sapp's project motor I pic ked up as he closed down business.=0A =0AI have been learning and relearnin g a lot and the end is insight.=0A =0AI have seen this issue before but it has been so long (over 30 years) so I need some reminding.=0A =0AThe mixtur e cable is binding after about an inch of movement toward lean. The cable is retracting as seen from the engine. I see no huge/sharp bends in the tu be, no worse than many that are working.=0A =0AI am thinking it must be whe re the solid end meets the cable in side and a minor kink is restricting mo vement. How long are the solid rod ends? Perhaps that will help me locate the issue.=0A =0AOr I am all wet! Any ideas, or helpful hints? I am sure that I am not the first.=0A =0AJim (Pooh) Partington=0A =0A817.917.6806 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.