Today's Message Index:
----------------------
1. 02:17 PM - 12mm Cylinder Base Jet Nut wrenches (John Warwick)
2. 02:34 PM - (John Warwick)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 12mm Cylinder Base Jet Nut wrenches |
If you fly behind one of Mike Hanshew=99s highly-prized M14 engines,
you=99ll
recognize these 12 point =98Jet Nut=99 style cylinder base fast
eners he uses,
which have a conical base flange.
[image: Image.jpeg]
(The stock motor uses 14mm hex nuts with a tab washer securing adjacent
pairs.)
TYC has produced a batch of Cylinder Base nut wrenches for these 12 point
12mm Jet Nuts in the style & shape of the original Russian tool.
[image: Image_1.jpeg]
There=99s adequate clearance below the cylinder fins for the conical
entry on
this new wrench to engage a Jet Nut that has been hand-threaded onto the
tip of the stud. ( proto wrench shown)
[image: Image.png]
Since 2019, more than 100 of TYC=99s 14mm Repro cylinder base nut wr
enches
have been sold to M14-P owners and maintainers worldwide.
The same lifetime warranty applies to these 12mm Jet Nut wrenches, also
made of normalized, heat-treated Chromoly, polished and plated for a
lifetime of service.
If you run a Yak maintenance shop, it=99s just a matter of time befor
e a
customer with one of Mike Hanshew=99s motors will fly in for a condit
ional!
I won=99t respond to pricing questions here on the forum so please co
ntact
John off-list for more details - thank you!
Theyakcollection@gmail.com
--
www.theyakcollection.com
619 933-2571
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
If you fly behind one of Mike Hanshew=99s highly-prized M14 engines,
you=99ll
recognize these 12 point =98Jet Nut=99 style cylinder base fast
eners he uses,
which have a conical base flange.
https://www.dropbox.com/s/gwnl0v7wk8qezbr/YL3.jpg?dl=0
(The stock motor uses 14mm hex nuts with a tab washer securing adjacent
pairs.)
TYC has produced a batch of Cylinder Base nut wrenches for these 12 point
12mm Jet Nuts in the style & shape of the original Russian tool.
https://www.dropbox.com/s/rofb9k2u3rbkg4k/YL2.jpg?dl=0
There=99s adequate clearance below the cylinder fins for the conical
entry on
this new wrench to engage a Jet Nut that has been hand-threaded onto the
tip of the stud. ( proto wrench shown)
https://www.dropbox.com/s/ql6jrgzl038rtgl/YL1.png?dl=0
Since 2019, more than 100 of TYC=99s 14mm Repro cylinder base nut wr
enches
have been sold to M14-P owners and maintainers worldwide.
The same lifetime warranty applies to these 12mm Jet Nut wrenches, also
made of normalized, heat-treated Chromoly, polished and plated for a
lifetime of service.
If you run a Yak maintenance shop, it=99s just a matter of time befor
e a
customer with one of Mike Hanshew=99s motors will fly in for a condit
ional!
I won=99t respond to pricing questions here on the forum so please co
ntact
John off-list for more details - thank you!
Theyakcollection@gmail.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|