---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Sat 12/21/02: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:27 AM - Re: Internal Voltage Regulator (Gary K) 2. 06:41 AM - Re: Internal Voltage Regulator (John Golovich) 3. 07:40 AM - Re: Internal Voltage Regulator (JEEdmondson@aol.com) 4. 06:03 PM - Re: Engine mount ch701 (reineros) ________________________________ Message 1 _____________________________________ Time: 04:27:12 AM PST US From: "Gary K" Subject: Re: Zenith-List: Internal Voltage Regulator --> Zenith-List message posted by: "Gary K" Larry, I went thru the same thing. What 'Lectric Bob recommended is the external overvoltage module and disconnect contactor and an in-line fuse (fig. Z-14). That's how I wired my Stratus per his drawings. Only a few hours ground running but it runs. I'd be happy to send details, email me if you'd like to discuss it off-list. Gary K. FlyinK@Efortress.com ----- Original Message ----- From: "Larry C. McFarland" Subject: Zenith-List: Internal Voltage Regulator > --> Zenith-List message posted by: "Larry C. McFarland" > > Builders, > I'm trying to complete a wiring diagram from the AeroElectric > guidelines and have a question. Note 11 suggests that if an > alternator has a sealed internal type voltage regulator it's better > to convert it to an external type. I believe the Stratus alternator is internal and I'd > like to know how one might accomplish this. Wiring is not my strong suit. > Respectfully appreciate answers to this one. > Thanks again > Larry C. McFarland - 601hds > > ________________________________ Message 2 _____________________________________ Time: 06:41:20 AM PST US From: "John Golovich" Subject: Re: Zenith-List: Internal Voltage Regulator --> Zenith-List message posted by: "John Golovich" Speaking of Aero Electric. Has anyone purchased their book within the last few months?? I submitted an order before Thanksgiving and have heard nothing, nor seen my CC charged. I then emailed to ask about it only to not get a response. Any ideas? Is Bob still alive? ----- Original Message ----- From: "Larry C. McFarland" Subject: Zenith-List: Internal Voltage Regulator > --> Zenith-List message posted by: "Larry C. McFarland" > > Builders, > I'm trying to complete a wiring diagram from the AeroElectric > guidelines and have a question. Note 11 suggests that if an > alternator has a sealed internal type voltage regulator it's better > to convert it to an external type. I believe the Stratus alternator is internal and I'd > like to know how one might accomplish this. Wiring is not my strong suit. > Respectfully appreciate answers to this one. > Thanks again > Larry C. McFarland - 601hds > > ________________________________ Message 3 _____________________________________ Time: 07:40:55 AM PST US From: JEEdmondson@aol.com Subject: Re: Zenith-List: Internal Voltage Regulator --> Zenith-List message posted by: JEEdmondson@aol.com I just purchased it from "builders books". Recieved it in just 1 1/2 weeks. Builders books is a great place to buy books. Aircraft Construction Books and Videos . If you buy $ 50 or more right now, ask for the free "kits planes calandar" Jimmy Edmondson jeedmondson@aol.com ________________________________ Message 4 _____________________________________ Time: 06:03:08 PM PST US From: "reineros" Subject: Re: Zenith-List: Engine mount ch701 --> Zenith-List message posted by: "reineros" I am a scratch 701 builder and am using a Geo 4.0L with a Raven . I just talked to Raven last week and they tell me they are going to start development of a mount for the sidewinder set up. I just purchased a 2002 engine with 1,112 miles on it. I have everything from the fly weel to the fan, the wire harness, computer, starter, alternator, air cleaner etc. for $1,000. Rotax eat your heart out. They are out there, I found mine on the auto recyclers web site It was just one hr. from home right here in Southern California. ----- Original Message ----- From: "Rodgers, Robert" Subject: Zenith-List: Engine mount ch701 > --> Zenith-List message posted by: "Rodgers, Robert" > > Hi All, > Does anyone have access to someone ( preferably Canadian ) that can > make an engine mount for the 701 and 912 combination for a reasonable price? > I'm going to put in a Geo/Raven redrive combination mounted horizontally and > it looks like the best platform to start from would be the 912 mount. I > imagine that I'll have to change it some, but the should be about the same. > > Thanks > Rob > CH701 scratch building. > >