---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Wed 12/25/02: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:22 AM - remove (Joseph Hollars) 2. 04:52 AM - (Brandon Tucker) 3. 07:52 AM - Re: (Al Young) 4. 08:07 AM - Re: Re: (Randy L. Thwing) 5. 09:26 AM - Re: Christmas and Holiday (Bill Morelli) 6. 10:22 AM - Thanks (Carlos Sa) 7. 12:46 PM - 601XL Iceland (Magnus Matthiasson) 8. 04:45 PM - Re: Christmas airplane related story (Jim and Lucy) 9. 08:03 PM - Re: Re: Engish CAA rules. (Gary Gower) 10. 08:21 PM - Re: Re: (Gary Gower) 11. 08:54 PM - Re: 601XL Iceland (Gary Gower) ________________________________ Message 1 _____________________________________ Time: 12:22:36 AM PST US From: Joseph Hollars Subject: Zenith-List: remove --> Zenith-List message posted by: Joseph Hollars remove ________________________________ Message 2 _____________________________________ Time: 04:52:29 AM PST US From: Brandon Tucker --> Zenith-List message posted by: Brandon Tucker I am far from you (geographically) as well and just recieved my xl plans last month. I usually don't write much either, but it is guys like Chief (ret) Metz that have kept me alive over the last few years. They tend to know their s#!t. I have enjoyed the positive comments posted on this site over the last few months, and ignored the "not so" positive. I look forward to joining you as a builder when I return to the good 'ol US of A. Starting rib forming blocks next week. Brandon Tucker LT USN VFA-27 NAF Atsugi, JP. 601XL sn4978 ________________________________ Message 3 _____________________________________ Time: 07:52:29 AM PST US From: "Al Young" Subject: Zenith-List: Re: --> Zenith-List message posted by: "Al Young" Lt Tucker- I want to welcome you to the "list". But even more so, I would like to wish you and all your shipmates Merry Xmas and thanks for serving our Country. God speed and come home safe!! Al Young LTC US Army (Ret) XL Builder. ________________________________ Message 4 _____________________________________ Time: 08:07:43 AM PST US From: "Randy L. Thwing" Subject: Re: Zenith-List: Re: --> Zenith-List message posted by: "Randy L. Thwing" Well Said! Randy L. Thwing, Las Vegas Proud Father of AD1 Jeremy Thwing, USN, Keflavik, Iceland, neighbor of 701 builder Johann, who is a new Gramps, by the way! Zenith-List message posted by: "Al Young" > > Lt Tucker- I want to welcome you to the "list". But even more so, I would > like to wish you and all your shipmates Merry Xmas and thanks for serving > our Country. God speed and come home safe!! Al Young LTC US Army (Ret) XL > Builder. ________________________________ Message 5 _____________________________________ Time: 09:26:38 AM PST US From: Bill Morelli Subject: Re: Zenith-List: Christmas and Holiday --> Zenith-List message posted by: Bill Morelli Here's hoping that everyone and their families have a great holiday season. To keep inspiring you current and future builders, I have added a photo gallery to my web site with various photos from my first couple of years flying my HDS. If you care to, check it out. do not archive Regards, Bill (N812BM - HDS - Tri - Stratus - Vermont - 185.4 flight hrs. - 288 landings) web site -> http://homepages.together.net/~billvt/ ________________________________ Message 6 _____________________________________ Time: 10:22:13 AM PST US From: Carlos Sa Subject: Zenith-List: Thanks --> Zenith-List message posted by: Carlos Sa Hello, all I think this would be a good moment to say thanks to all of you who have provided people like me with advice, wisdom and encouragement over the past (in my case) three years. Special thanks to those that take the time to keep web sites - I know well how much this activity steals from your building time. It's been an interesting road, and I thanks you for participating in the journey. Merry Christmas to all [or Happy Holiday Season, if you prefer :o) ] Carlos CH601-HD - rudder done, stabilizer on the way - 138 holes on the bottom skin... Post your free ad now! http://personals.yahoo.ca ________________________________ Message 7 _____________________________________ Time: 12:46:01 PM PST US From: "Magnus Matthiasson" Subject: Zenith-List: 601XL Iceland --> Zenith-List message posted by: "Magnus Matthiasson" Hello everyone. My name is Magnus Matthiasson and new on the list. I orderd plans for the 601XL last week and hope to start building early next year. It is nice to know that there are other builders out there when taking on a project like this. I have been reading the list and like what I see. Some of the webpages are just great! Happy Holidays Magnus Matthiasson Reykjavik Iceland ________________________________ Message 8 _____________________________________ Time: 04:45:15 PM PST US From: Jim and Lucy Subject: Re: Zenith-List: Christmas airplane related story --> Zenith-List message posted by: Jim and Lucy Well I should have checked that url out before sending it. It quits 2 minutes before the end of file. Kind of wrecks a good story if you can't hear the end of it. This link has the last half of the story including the ending. Thanks to everyone that pointed this out to me. I hope you enjoy it. http://www.cbc.ca/asithappens/real/pt2-99-12-24-aih2.ram At 12:00 AM 12/25/2002 -0500, you wrote: >--> Zenith-List message posted by: Jim and Lucy > >At 11:34 PM 12/24/2002 -0500, you wrote: > >--> Zenith-List message posted by: Jim and Lucy > > > >This is a great story I heard it tonight on the radio. > > > >They play it every year on Xmas eve here. > > > >I found it on their website and thought I would share > >it with you guys that never heard it before. > > > >Its about a lost vampire pilot trying to get home to > >England on Xmas eve in late 1950's > > > >It is in real audio format and even my junky internet > >connection gets it ok. > > > >Jim Pollard > >Merlin Ont > >ch601hds > >ea81 > > > > > >http://cbc.ca/asithappens/audio/aih_7.ram > > > > > >do not archive > > >Sorry wrong link try this one > > >http://www.cbc.ca/asithappens/real/pt1-01-12-24-aih1.ram > > >starts about 2 min after the begining Well I should have checked that url out before sending it. It quits 2 minutes before the end of file. Kind of wrecks a good story if you can't hear the end of it. This link has the last half of the story including the ending. Thanks to everyone that pointed this out to me. I hope you enjoy it. http://www.cbc.ca/asithappens/real/pt2-99-12-24-aih2.ram ________________________________ Message 9 _____________________________________ Time: 08:03:40 PM PST US From: Gary Gower Subject: Re: Zenith-List: Re: Engish CAA rules. --> Zenith-List message posted by: Gary Gower Eric, I am sorry for you. The problem WITH YOUR PROJECT is not the plane or the designer either... Is YOUR BURROCRACY (donkeycracy in english :-) there will be no plane or designer in the whole world that would satisfy the shit rules imposed buy your goverment! The worse thing is there is no way to get them enough papers. Your amateur aviation is a hell, not because of you the builders or pilots, but for your goverment. Nothing to do there either, is not a democracy so YOU cant change your goberment... Apologize to Chris Heintz he designed the plane, not your CAA rules. Saludos Gary Gower --- Eric Mchugh wrote: > --> Zenith-List message posted by: "Eric Mchugh" > > > I am one of the builders who cannot complete thier aircraft after > been > conned by chris hentz who is incapable of designing a mount. It will > be > quicker to do it yourself, you will get no sense or help from zenair > . I can > prove that from there corespondance . I have built a jig and ready to > produce a mount i am just looking for a CAA welder a qualified person > that > is .Thats something else zenair won't tel you .They cannot produce > the > documentation to confirm there welds/design are safe. > -----Original Message----- > From: Greg P Jannakos > To: zenith-list@matronics.com > Date: 04 December 2002 20:02 > > > >--> Zenith-List message posted by: Greg P Jannakos > > > >Looking for following items for Zodiac 601 > > > > 1.Engine mount for C series Continental engine or plans for > building > >same. > > 2. Canopy > > > >Any available? > > > > > > > > _-> > > > > > > ________________________________ Message 10 ____________________________________ Time: 08:21:27 PM PST US From: Gary Gower Subject: Re: Zenith-List: Re: --> Zenith-List message posted by: Gary Gower Fred, If you think (sometimes) that you have problems with the FAA rules... You should look (and live) other countries Aviation Authorities, one of the worse are the english, because they cant get a "under the table" solution to the problem ;.) Maybe then you can understand letters like this one... Keep democracy HIGH! in USA. Fight the "rules makers" that you think failed, voting against them. Down of the soap box. And Merry Christmas to all. Saludos Gary Gower Do no archive. --- Fred Poor wrote: > --> Zenith-List message posted by: Fred Poor > > > How in the hell can you write a letter like this about > CHRIS > --- Eric Mchugh wrote: > > --> Zenith-List message posted by: "Eric Mchugh" > > > > > > I am one of the builders who cannot complete thier > > aircraft after been > > conned by chris hentz who is incapable of designing > > a mount. It will be > > quicker to do it yourself, you will get no sense or > > help from zenair . I can > > prove that from there corespondance . I have built a > > jig and ready to > > produce a mount i am just looking for a CAA welder a > > qualified person that > > is .Thats something else zenair won't tel you .They > > cannot produce the > > documentation to confirm there welds/design are > > safe. > > -----Original Message----- > > From: Greg P Jannakos > > To: zenith-list@matronics.com > > > > Date: 04 December 2002 20:02 > > > > > > >--> Zenith-List message posted by: Greg P Jannakos > > > > > > > >Looking for following items for Zodiac 601 > > > > > > 1.Engine mount for C series Continental > > engine or plans for > > building > > >same. > > > 2. Canopy > > > > > >Any available? > > > > > > > > > > > > > > Click on the > > this > > generous > > _-> > > Contributions > > any other > > Forums. > > > > latest messages. > > List members. > > > > http://www.matronics.com/subscription > > http://www.matronics.com/FAQ/Zenith-List.htm > > Digests:http://www.matronics.com/digest/zenith-list > > http://www.matronics.com/archives > > http://www.matronics.com/photoshare > > http://www.matronics.com/emaillists > > > > > > > > > > > > > > _-> > > > > > > ________________________________ Message 11 ____________________________________ Time: 08:54:25 PM PST US From: Gary Gower Subject: Re: Zenith-List: 601XL Iceland --> Zenith-List message posted by: Gary Gower Welcome Magnus. We are building a 701 from kit here. This list is great and you chosed also a wonderfull airplane. Saludos Gary Gower Guadalajara, Jalisco, Mexico Do not archive --- Magnus Matthiasson wrote: > --> Zenith-List message posted by: "Magnus Matthiasson" > > > Hello everyone. > > My name is Magnus Matthiasson and new on the list. > I orderd plans for the 601XL last week and hope to > start building early next year. > It is nice to know that there are other builders > out there when taking on a project like this. > I have been reading the list and like what I see. > Some of the webpages are just great! > > Happy Holidays > > Magnus Matthiasson > Reykjavik > Iceland > > > > _-> > > > > > >