---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Sat 12/28/02: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:06 AM - Re: stabilizer hinge vs edge distance (Carlos Sa) 2. 01:51 PM - ch601xl (Noel & Yoshie Simmons) 3. 03:36 PM - Re: ch601xl (Bill Cardell) ________________________________ Message 1 _____________________________________ Time: 07:06:44 AM PST US From: Carlos Sa Subject: Re: Zenith-List: stabilizer hinge vs edge distance --> Zenith-List message posted by: Carlos Sa Hello, Michel You are, quite obviously, correct in all counts. The thing is that I was treating the distance as thins: you plan it to be 3D all the way. If something goes wrong, you can *accept* 2D - like in an exceptional basis. Which led me to thing I had the wrong part, thought reinforced by the fact that the part number had changed. Merci bien de ton comentaire. Salut Carlos > AC43-13, Par 4-57 4-c-1 (page 4-19) specifies minimum > edge distance = 2D and minimum rivet spacing = 3D. > This being said, I understand that the hinge is > adequate. > > Isn't there a note in the construction manual saying > that minimum edge distance is 2D? > > Michel Post your free ad now! http://personals.yahoo.ca ________________________________ Message 2 _____________________________________ Time: 01:51:21 PM PST US From: "Noel & Yoshie Simmons" Subject: Zenith-List: ch601xl --> Zenith-List message posted by: "Noel & Yoshie Simmons" Listers, Looking for a CH601XL kit that someone is looking to get out of. would also consider a flying aircraft. noel Noel and Yoshie Simmons Blue Sky Aviation, Inc. "We do builder assistance!" Toll Free: 866-859-0390 info@blueskyaviation.net www.blueskyaviation.net ________________________________ Message 3 _____________________________________ Time: 03:36:48 PM PST US From: Bill Cardell Subject: RE: Zenith-List: ch601xl --> Zenith-List message posted by: Bill Cardell Me, too! -----Original Message----- From: Noel & Yoshie Simmons [mailto:noel@blueskyaviation.net] Subject: Zenith-List: ch601xl --> Zenith-List message posted by: "Noel & Yoshie Simmons" --> Listers, Looking for a CH601XL kit that someone is looking to get out of. would also consider a flying aircraft. noel Noel and Yoshie Simmons Blue Sky Aviation, Inc. "We do builder assistance!" Toll Free: 866-859-0390 info@blueskyaviation.net www.blueskyaviation.net advertising on the Matronics Forums. Share: Share photos & files with other List members.