---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Sat 01/11/03: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:53 AM - Re: test ignore (Bryan Martin) 2. 12:24 PM - Brake Master Cylinder set up (r.p.reynolds) 3. 06:06 PM - Brakes (Greg P Jannakos) ________________________________ Message 1 _____________________________________ Time: 06:53:06 AM PST US From: "Bryan Martin" Subject: Zenith-List: RE: test ignore --> Zenith-List message posted by: "Bryan Martin" do not archive ________________________________ Message 2 _____________________________________ Time: 12:24:47 PM PST US From: "r.p.reynolds" Subject: Zenith-List: Brake Master Cylinder set up --> Zenith-List message posted by: "r.p.reynolds" Dear Zenith Builders, I have just dropped the Fus onto its wheels It looking like a plane at last. Could anyone tell me the correct distance from the foot pedal centre line to the master cylinder pivoy point centre line. My Master cylinders are mounted on the floor not to the pedal frame. The drawing I have shows the ones mounted on the frame I think this may be the old way of doing the Job. Thanks Paul UK CH601ul About 700 hours in, wings made, all tail made. canapy still to do. ________________________________ Message 3 _____________________________________ Time: 06:06:37 PM PST US Subject: Zenith-List: Brakes From: Greg P Jannakos --> Zenith-List message posted by: Greg P Jannakos Have installed heal brakes in my CH601HDS with no problems. I simply added a hat shaped channel to the floor for reinforcement, and located the master cylinder offset to the pedal. Easy to reach, and no linkage problem. Try it, you'll like it.