Today's Message Index:
----------------------
1. 04:58 AM - Re: Sun-n-fun (Lowell Metz)
2. 08:22 AM - Subject: Re: Sun-n-fun (Brenton Battles)
3. 11:31 AM - 601 HDS for sale (Charles Sonberg)
4. 01:18 PM - CHT sensors (Ron DeWees)
5. 03:02 PM - Re: CHT sensors (Benford2@aol.com)
6. 06:54 PM - Re: CHT sensors (barry mayne)
7. 07:46 PM - Re: Inertia Reel seat belts/ SAFETY / negitive g's (Rick)
8. 08:25 PM - CH-640 Cruise Speed (cc9647)
9. 09:00 PM - Re: CHT sensors (Chuck Deiterich)
10. 09:49 PM - Re: 601 HDS for sale (Tom Orsborn)
11. 10:04 PM - Re: 601 HDS for sale (Charles Sonberg)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Lowell Metz" <lowellmetz@earthlink.net>
Open invitation to you builders attending S-N-F. I will be camped in the
U/L area all week , judging planes in the mornings, but will be in the shade
of my campsite during the airshow, enjoying refreshments, and good hearted
fellowship with other builders. I am a 701 builder but anyone wanting to get
off their feet for a while, stop in. I will be camped along the front of the
back section under a silver canopy, and flying a Navy flag from the front of
the canopy. I'm short, fat, old and bald. Can't miss me. Lowell Metz
Do Not Archive
----- Original Message -----
From: <ZodiacBuilder@aol.com>
Subject: Re: Zenith-List: Sun-n-fun
> --> Zenith-List message posted by: ZodiacBuilder@aol.com
>
> In a message dated 3/12/2003 10:49:39 PM Eastern Standard Time,
> ppolstra@mindspring.com writes:
>
> > Anyone going to sun-n-fun this year?
>
> I will be there.....!
>
> Do not archive
>
> John W. Tarabocchia
> (407) 709-7255
>
> http://hometown.aol.com/zodiacbuilder
> N6042T 90hrs Flown.....
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: Brenton Battles <brentbattles@charter.net>
I plan to fly in and park in the Homebuilt area and camp in my pup tent
next to the pond.
I'll also be working in the Sheet Metal shop from time to time.
Regards,
Brent Battles N16BZ
http://webpages.charter.net/brentbattles/brent'szodiac.htm
Do Not Archive
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 601 HDS for sale |
--> Zenith-List message posted by: "Charles Sonberg" <2408s@cox-internet.com>
Since I have received several replies thus far off list, I'm going to
elaborate a bit on my zodie.
http://www.cox-internet.com/zodiac For further info
361-576-2403
This is the only place I have offered her for sale $23,900 or best offer
I will take suv or convertible as part or full trade.
She is in excellent shape with everything working.
Everything I have extra will go with bird. Head sets, tires (bought because
here on list it was stated the factory tires last 50hrs, mine still look new
at 70), anywhere map system, special tools, old garmin 1200xl gps, ect
She is set up for night vfr.
She was built entirely from Zenith kits, including firewall forward package
from zenith. I ordered the Stratus EA-81 with dual ignition. I have complete
Pic builders log and log books. I built her entirely by myself except
nonflying friend helped me with canopy, mounting engine, and painting. I
owned a Cessna 150 that I sold to build this little bird. She climbs faster,
burns less fuel, cruises faster, rides much smother, and has so much more
room. There is a link on web site I put up yesterday to e-mail me direct. I
am proud of her and will give honest replies to all e-mails and phone calls.
If you are building and want straight opinions I welcome calls and emails on
this also.
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Ron DeWees" <rdewees@mindspring.com>
Wonder if anyone can tell me if there is any acceptable location for CHT sensor
other than under the plugs? My Jabiru has a head bolt almost between the two
plugs and would be a much easier location to put sensor on. THe head fins make
plug installation difficult unless fin area is cut off.
Thanks for your ideas and experiences
Ron
601HDS/TD Jab 3300 in progress
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: Benford2@aol.com
In a message dated 3/14/2003 2:20:20 PM Mountain Standard Time,
rdewees@mindspring.com writes:
>
> --> Zenith-List message posted by: "Ron DeWees" <rdewees@mindspring.com>
>
> Wonder if anyone can tell me if there is any acceptable location for CHT
> sensor other than under the plugs? My Jabiru has a head bolt almost
> between the two plugs and would be a much easier location to put sensor on.
> THe head fins make plug installation difficult unless fin area is cut off.
> Thanks for your ideas and experiences
> Ron
> 601HDS/TD Jab 3300 in progress
>
>
You will crush the sensor when ya torque the bolt.
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "barry mayne" <bazmay@bigpond.com>
G'day Ron,
I am wondering if you have the wrong size for the CHT senders. I had no
problem fitting the 14mm size into the area around the plugs but I reckon
the 16mm would not fit.
Cheers,
Barry Mayne
----- Original Message -----
From: "Ron DeWees" <rdewees@mindspring.com>
Subject: Zenith-List: CHT sensors
> --> Zenith-List message posted by: "Ron DeWees" <rdewees@mindspring.com>
>
> Wonder if anyone can tell me if there is any acceptable location for CHT
sensor other than under the plugs? >
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Inertia Reel seat belts/ SAFETY / negitive g's |
--> Zenith-List message posted by: Rick <rick.pitcher@verizon.net>
Thanks guys, for the thoughts on the automotive inertial reels. After
reading the responses I've decided not to use the automotive type belts.
It's obvious that a lot of folks have put a lot of thought into fitting
out their planes. It sure is nice how the internet makes it so easy to
tap into this collective wisdom.
Thanks again,
Rick Pitcher
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | CH-640 Cruise Speed |
--> Zenith-List message posted by: "cc9647" <cc9647@netzero.com>
Are there any CH-640 builders or flyers out there that can independently verify
the accuracy of the reported 150mph cruise speed of the CH-640 as listed on the
Zenair website?
While I'm at it, I'd also like to ask anyone currently building a CH-640 kit about
their impressions so far (ease of construction, thoroughness of assembly manual,
etc.). I know there are a few folks plans building the CH-640 (Jeff, Matthew,
etc.) but would be especially interested in hearing from someone building
from the kit -- especially the fast build kit.
Thanks for all the great information being posted on this site. I'm learning a
lot while lurking here and at other kit's sites.
Chris
Contemplating which kit to build...
---
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Chuck Deiterich" <cfd@thegateway.net>
Try http://www.usjabiru.com/Tech%20Tips.htm#Cylinder Head Temp Sender
Installation.
This is how the dealer does it. I have not had a problem hitting the probes
when I torque the heads on my Jabiru 2200.
Chuck D.
N701TX
----- Original Message -----
From: <Benford2@aol.com>
Subject: Re: Zenith-List: CHT sensors
> --> Zenith-List message posted by: Benford2@aol.com
>
> In a message dated 3/14/2003 2:20:20 PM Mountain Standard Time,
> rdewees@mindspring.com writes:
>
>
> >
> > --> Zenith-List message posted by: "Ron DeWees" <rdewees@mindspring.com>
> >
> > Wonder if anyone can tell me if there is any acceptable location for CHT
> > sensor other than under the plugs? My Jabiru has a head bolt almost
> > between the two plugs and would be a much easier location to put sensor
on.
> > THe head fins make plug installation difficult unless fin area is cut
off.
> > Thanks for your ideas and experiences
> > Ron
> > 601HDS/TD Jab 3300 in progress
> >
> >
>
> You will crush the sensor when ya torque the bolt.
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 601 HDS for sale |
--> Zenith-List message posted by: "Tom Orsborn" <tom-orsborsn@houston.rr.com>
Charles - you brought my rudder home from workshop. I'm in NW Houston -
Cypress actually. Surprised to see your plane up for sale. You did such a
good job of following through and getting it built in a reasonable time.
I stopped building after the tailfeathers and right wing. Need to get
started again.
Best of luck in selling it.
tom
----- Original Message -----
From: "Charles Sonberg" <2408s@cox-internet.com>
Subject: Zenith-List: 601 HDS for sale
> --> Zenith-List message posted by: "Charles Sonberg"
<2408s@cox-internet.com>
>
> Since I have received several replies thus far off list, I'm going to
> elaborate a bit on my zodie.
> http://www.cox-internet.com/zodiac For further info
> 361-576-2403
> This is the only place I have offered her for sale $23,900 or best offer
> I will take suv or convertible as part or full trade.
>
> She is in excellent shape with everything working.
> Everything I have extra will go with bird. Head sets, tires (bought
because
> here on list it was stated the factory tires last 50hrs, mine still look
new
> at 70), anywhere map system, special tools, old garmin 1200xl gps, ect
> She is set up for night vfr.
> She was built entirely from Zenith kits, including firewall forward
package
> from zenith. I ordered the Stratus EA-81 with dual ignition. I have
complete
> Pic builders log and log books. I built her entirely by myself except
> nonflying friend helped me with canopy, mounting engine, and painting. I
> owned a Cessna 150 that I sold to build this little bird. She climbs
faster,
> burns less fuel, cruises faster, rides much smother, and has so much more
> room. There is a link on web site I put up yesterday to e-mail me direct.
I
> am proud of her and will give honest replies to all e-mails and phone
calls.
> If you are building and want straight opinions I welcome calls and emails
on
> this also.
>
>
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 601 HDS for sale |
--> Zenith-List message posted by: "Charles Sonberg" <2408s@cox-internet.com>
TY if I don't sell that's ok also.:)
-----Original Message-----
From: owner-zenith-list-server@matronics.com
[mailto:owner-zenith-list-server@matronics.com]On Behalf Of Tom Orsborn
Subject: Re: Zenith-List: 601 HDS for sale
--> Zenith-List message posted by: "Tom Orsborn"
<tom-orsborsn@houston.rr.com>
Charles - you brought my rudder home from workshop. I'm in NW Houston -
Cypress actually. Surprised to see your plane up for sale. You did such a
good job of following through and getting it built in a reasonable time.
I stopped building after the tailfeathers and right wing. Need to get
started again.
Best of luck in selling it.
tom
----- Original Message -----
From: "Charles Sonberg" <2408s@cox-internet.com>
Subject: Zenith-List: 601 HDS for sale
> --> Zenith-List message posted by: "Charles Sonberg"
<2408s@cox-internet.com>
>
> Since I have received several replies thus far off list, I'm going to
> elaborate a bit on my zodie.
> http://www.cox-internet.com/zodiac For further info
> 361-576-2403
> This is the only place I have offered her for sale $23,900 or best offer
> I will take suv or convertible as part or full trade.
>
> She is in excellent shape with everything working.
> Everything I have extra will go with bird. Head sets, tires (bought
because
> here on list it was stated the factory tires last 50hrs, mine still look
new
> at 70), anywhere map system, special tools, old garmin 1200xl gps, ect
> She is set up for night vfr.
> She was built entirely from Zenith kits, including firewall forward
package
> from zenith. I ordered the Stratus EA-81 with dual ignition. I have
complete
> Pic builders log and log books. I built her entirely by myself except
> nonflying friend helped me with canopy, mounting engine, and painting. I
> owned a Cessna 150 that I sold to build this little bird. She climbs
faster,
> burns less fuel, cruises faster, rides much smother, and has so much more
> room. There is a link on web site I put up yesterday to e-mail me direct.
I
> am proud of her and will give honest replies to all e-mails and phone
calls.
> If you are building and want straight opinions I welcome calls and emails
on
> this also.
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|