---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Fri 04/18/03: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:45 AM - Re: CH-801 POH (Phil & Michele Miller) 2. 01:28 PM - Re: 701 Firewall Insullation (g t) 3. 01:44 PM - FOR SALE: Partial CH-601HD Kit - UPDATE (Joe Knighton) ________________________________ Message 1 _____________________________________ Time: 01:45:25 AM PST US From: "Phil & Michele Miller" Subject: RE: Zenith-List: CH-801 POH --> Zenith-List message posted by: "Phil & Michele Miller" I would be very interested in your POH, Chuck. Thanks in advance. Do not archive. Cheers, Phil Miller New Zealand -----Original Message----- From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Chuck Deiterich Subject: Re: Zenith-List: CH-801 POH --> Zenith-List message posted by: "Chuck Deiterich" --> I have a POH in Word for my 701/Jabiru 2200 which would be a good starting place. Mostly updating numbers. I modified it from the ZAC web page. If there is a lot of interest, I'll put it on my web pages. Chuck D. N701TX ----- Original Message ----- From: Subject: Re: Zenith-List: CH-801 POH > --> Zenith-List message posted by: caspainhower@aep.com > > > Ditto for the 601 XL. > > Craig Spainhower > > > "Carlson, Dale" > > o.us> cc: > Sent by: Subject: Zenith-List: CH-801 POH > owner-zenith-list-server@ma > tronics.com > > > 04/15/03 05:49 PM > Please respond to > zenith-list > > > --> Zenith-List message posted by: "Carlson, Dale" > > > I wonder if anyone had put together a pilot operating handbook (POH) > for the 801. Zenith does not seem inclined to offer anything in this > area. It > would be helpful if a consistent, accurate manual were available out > there in a "word" form. I am planning on starting one but don't want > to rebuild the wheel if it already exists. > > Dale Carlson > N128DC > > > This e-mail message and all attachments transmitted with it from the > Nuclear Generation Group of American Electric Power are for the sole > use of the intended recipient(s) and may contain confidential and > privileged information. Any unauthorized review, use, disclosure or > distribution is prohibited. If you are not the intended recipient, > please contact the sender by reply e-mail and destroy all copies of > the original message. > > direct advertising on the Matronics Forums. ________________________________ Message 2 _____________________________________ Time: 01:28:52 PM PST US From: g t Subject: Re: Zenith-List: 701 Firewall Insullation --> Zenith-List message posted by: g t Another thought along a similar line. I have seen a coating that is Latex based, but primarily composed of a ceramic material. I used it at work for insulating hot tanks. This may be an interesting product to pursue for heat insulating the firewall. If anyone has interest, I will look up more information on this material to see if it is a fit. It would certainly provide good heat insulation in a very thin application. Probably at a weight disadvantage to fiberglass though. ABC wrote:--> Zenith-List message posted by: "ABC" Mike and Group I found a site with some interesting products. They have a liquid sound proofing paint ?? It's FAA approved. I have never used this product, but I did purchase some of their 2 inch tape ( worked good , it stuck to everything ). Just a though.... http://store.yahoo.com/soundproofing/index.html Peter Ferguson N601PK Jab 3300 7 years in the making ..... Almost done !! ----- Original Message ----- > Just a quick question for any owners of aircraft with the 912 engine, > have any of you went without insullating the firewall? and has there > been any noticable heat coming through into the cockpit? And if there > was, what type of insullation may have been used to counter the heat? I > am almost at the point of closing up the panel forward section of the > project and figure this would be better taken care of at this stage. --------------------------------- ________________________________ Message 3 _____________________________________ Time: 01:44:49 PM PST US From: "Joe Knighton" Subject: Zenith-List: FOR SALE: Partial CH-601HD Kit - UPDATE --> Zenith-List message posted by: "Joe Knighton" ***** UPDATE ***** Hello List Members: I began the construction of a tricycle geared CH-601HD several years ago. Due to economic reasons, I will not be finishing the project, and offer the following components for sale: -All components for center wing section - $1,000.00. -Fuselage Kit - $2900.00 -Gears & Wheels Kit - $870.00 -Controls Kit - $450.00 -Fuel System Kit (with 2x12 gallon LE tanks with level senders) - $540.00 -Aeroflash Nav/Strobe Light Kit - ***** SOLD ***** -Wheel Fairings (quantity of 3) - $180.00 These prices are for any or all of the sub-kits, and include boxing/crating, but shipping will be extra. If anyone would like to discuss this matter, I can be contacted by e-mail at knighton@sound.net or phone at 913-310-9512. Best Regards, Joe Knighton Lenexa, Kansas