Today's Message Index:
----------------------
1. 04:53 PM - 912 S regulator (Walt Cannon)
2. 06:16 PM - Re: 912 S regulator (Dave Alberti)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Walt Cannon" <grnlake@earthlink.net>
Sounds like a lot of us are at about this same place. I have been eyeballing
the schematics for the engine wiring installation in my 701 and was
wondering about this capacitor. Is it necessary? Any tips on where to get a
"high quality" aircraft grade device of this size? Part #s and sources?
Anybody feel like sharing a picture of a completed installation? Have people
used a traditional switched "master solenoid" to activate the buss from the
battery hot cable? I was thinking about just coming off of the hot side of
the starter solenoid. Jon Croke mentioned this switched terminal on the
regulator. Seems like that could just be a wire from the master switch
controlled buss to the regulator.
This seems like another area where ZAC could provide people a simple
reference diagram of a Rotax basic equipped airplane. Anybody have one of
those they would like to share with us?
Regards,
Walt Cannon
Seattle, WA
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 912 S regulator |
--> Zenith-List message posted by: "Dave Alberti" <daberti@execpc.com>
Go to Bob Nichols site lots of ideas http://www.aeroelectric.com/
----- Original Message -----
From: "Walt Cannon" <grnlake@earthlink.net>
Subject: Zenith-List: 912 S regulator
> --> Zenith-List message posted by: "Walt Cannon" <grnlake@earthlink.net>
>
> Sounds like a lot of us are at about this same place. I have been
eyeballing
> the schematics for the engine wiring installation in my 701 and was
> wondering about this capacitor. Is it necessary? Any tips on where to get
a
> "high quality" aircraft grade device of this size? Part #s and sources?
> Anybody feel like sharing a picture of a completed installation? Have
people
> used a traditional switched "master solenoid" to activate the buss from
the
> battery hot cable? I was thinking about just coming off of the hot side of
> the starter solenoid. Jon Croke mentioned this switched terminal on the
> regulator. Seems like that could just be a wire from the master switch
> controlled buss to the regulator.
>
> This seems like another area where ZAC could provide people a simple
> reference diagram of a Rotax basic equipped airplane. Anybody have one of
> those they would like to share with us?
>
> Regards,
>
> Walt Cannon
> Seattle, WA
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|