Today's Message Index:
----------------------
1. 12:01 AM - Hog Air e-mail (Brett Ray)
2. 12:09 AM - Hog Air e-mail (Brett Ray)
3. 12:16 AM - Hog Air e-mail (Brett Ray)
4. 12:23 AM - Hog Air e-mail (Brett Ray)
5. 12:36 AM - Hog Air e-mail (Brett Ray)
6. 12:42 AM - Hog Air e-mail (Brett Ray)
7. 07:26 AM - Finding torque info....? (ZodiacBuilder@aol.com)
8. 07:38 AM - Re: How flat is flat (ZodiacBuilder@aol.com)
9. 08:10 AM - Hog Air e-mail (Brett Ray)
10. 08:27 AM - Hog Air e-mail (Brett Ray)
11. 09:01 AM - Hog Air e-mail (Brett Ray)
12. 09:01 AM - Hog Air e-mail (Brett Ray)
13. 09:31 AM - Hog Air e-mail (Brett Ray)
14. 09:33 AM - Hog Air e-mail (Brett Ray)
15. 09:35 AM - Re: Official Usage Guideline [Please Read] [Monthly Posting] (Bill Howerton)
16. 09:52 AM - Re: [ Perry Morrison ] : New Email List Photo Share (Rick)
17. 10:03 AM - Re: [ Perry Morrison ] : New Email List Photo Share Available! (Ron DeWees)
18. 10:04 AM - Re: [ Perry Morrison ] : New Email List Photo Share Available! (Gary Gower)
19. 10:05 AM - Hog Air e-mail (Brett Ray)
20. 10:09 AM - Hog Air e-mail (Brett Ray)
21. 10:11 AM - Hog Air e-mail (Brett Ray)
22. 11:05 AM - Re: [ Perry Morrison ] : New Email List Photo Share Available! (Jari Kaija)
23. 11:08 AM - Re: Finding torque info....? (Cy Galley)
24. 11:49 AM - Re: [ Perry Morrison ] : New Email List Photo Share (Rick)
25. 02:46 PM - Re: Finding torque info....? (Clive Richards)
26. 02:53 PM - Re: How flat is flat (how much is 1 degree) (Jim Frisby)
27. 05:11 PM - Photoshare Video- More Background (Dr. Perry Morrison)
28. 06:19 PM - Expanision tank (Tim & Diane Shankland)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Finding torque info....? |
--> Zenith-List message posted by: ZodiacBuilder@aol.com
Hi List,
Does anyone know where I can find torque info for a Cont...0-200. I
have both the Overhaul manual and the engine manual. Niether have this info.
At least not in laymans terms.
Thanks in advance..
John Tarabocchia
http://hometown.aol.com/Zodiacbuilder
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: How flat is flat |
--> Zenith-List message posted by: ZodiacBuilder@aol.com
In a message dated 6/1/2003 12:05:37 PM Eastern Standard Time,
jkerr@pcweb.net writes:
> Greeting all-
> How flat is your flat workbench? Right now I have my 4' x 12' table +1mm /
> -0mm at various points measured with a taught string & square and was
> wondering if that is flat compared to what the rest of you have, or do I have
more
> work to do? Thanks.
>
>
Show Off
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Official Usage Guideline [Please Read] [Monthly Posting] |
--> Zenith-List message posted by: "Bill Howerton" <Bill@Howerton.com>
please remove or block Brett Ray from this list!!!! His auto-response is
more than a little annoying
----- Original Message -----
From: "Matt Dralle" <dralle@matronics.com>
Subject: Zenith-List: Official Usage Guideline [Please Read] [Monthly
Posting]
> --> Zenith-List message posted by: dralle@matronics.com (Matt Dralle)
>
>
****************************************************************************
**
> Zenith-List Usage Guidelines
>
****************************************************************************
**
>
> The following details the official Usage Guidelines for the Zenith-List.
> You are encouraged to read it carefully, and to abide by the rules
therein.
> Failure to use the Zenith-List in the manner described below may result
> in the removal of the subscribers from the List.
>
>
> Zenith-List Policy Statement
>
> The purpose of the Zenith-List is to provide a forum of discussion for
> things related to this particular discussion group. The List's goals
> are to serve as an information resource to its members; to deliver
> high-quality content; to provide moral support; to foster camaraderie
> among its members; and to support safe operation. Reaching these goals
> requires the participation and cooperation of each and every member of
> the List. To this end, the following guidelines have been established:
>
>
> - Please keep all posts related to the List at some level. Do not submit
> posts concerning computer viruses, urban legends, random humor, long
> lost buddies' phone numbers, etc. etc.
>
> - THINK carefully before you write. Ask yourself if your post will be
> relevant to everyone. If you have to wonder about that, DON'T send it.
>
> - Remember that your post will be included for posterity in an archive
> that is growing in size at a extraordinary rate. Try to be concise and
> terse in your posts. Avoid overly wordy and lengthy posts and
> responses.
>
> - Keep your signature brief. Please include your name, email address,
> aircraft type/tail number, and geographic location. A short line
> about where you are in the building process is also nice. Avoid
> bulky signatures with character graphics; they consume unnecessary
> space in the archive.
>
> - DON'T post requests to the List for information when that info is
> easily obtainable from other widely available sources. Consult the
> web page or FAQ first.
>
> - If you want to respond to a post, DO keep the "Subject:" line of
> your response the same as that of the original post. This makes it
> easy to find threads in the archive.
>
> - When responding, NEVER quote the *entire* original post in your
> response. DO use lines from the original post to help "tune in" the
> reader to the topic at hand, but be selective. The impact that
> quoting the entire original post has on the size of the archive
> can not be overstated!
>
> - When the poster asks you to respond to him/her personally, DO NOT
> then go ahead and reply to the List. Be aware that clicking the
> "reply" button on your mail package does not necessarily send your
> response to the original poster. You might have to actively address
> your response with the original poster's email address.
>
> - DO NOT use the List to respond to a post unless you have something
> to add that is relevant and has a broad appeal. "Way to go!", "I
> agree", and "Congratulations" are all responses that are better sent
> to the original poster directly, rather than to the List at large.
>
> - When responding to others' posts, avoid the feeling that you need to
> comment on every last point in their posts, unless you can truly
> contribute something valuable.
>
> - Feel free to disagree with other viewpoints, BUT keep your tone
> polite and respectful. Don't make snide comments, personally attack
> other listers, or take the moral high ground on an obviously
> controversial issue. This will only cause a pointless debate that
> will hurt feelings, waste bandwidth and resolve nothing.
>
> -------
>
>
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: [ Perry Morrison ] : New Email List Photo Share |
Available!
--> Zenith-List message posted by: Rick <rick.pitcher@verizon.net>
Email List Photo Shares wrote:
>
> --> Zenith-List message posted by: Email List Photo Shares <pictures@matronics.com>
>
> A new Email List Photo Share is available:
>
> Poster: Perry Morrison <prm@mail2me.com>
>
>
> Subject: 601HD in-cockpit landing video
>
> http://www.matronics.com/photoshare/prm@mail2me.com.au.06.01.2003/index.html
Does this .AVI video work for anyone else, or is it just my computer?
Rick P.
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: [ Perry Morrison ] : New Email List Photo Share Available! |
--> Zenith-List message posted by: "Ron DeWees" <rdewees@mindspring.com>
Hi RIck,
It works fine for me, but I have DSL and it still took about 30 seconds to
load. Great video. Thanks so much Perry.
Ron DeWees
do not archive
----- Original Message -----
From: "Rick" <rick.pitcher@verizon.net>
Subject: Re: Zenith-List: [ Perry Morrison ] : New Email List Photo Share
Available!
> --> Zenith-List message posted by: Rick <rick.pitcher@verizon.net>
>
>
> Email List Photo Shares wrote:
> >
> > --> Zenith-List message posted by: Email List Photo Shares
<pictures@matronics.com>
> >
> > A new Email List Photo Share is available:
> >
> > Poster: Perry Morrison <prm@mail2me.com>
> >
> >
> > Subject: 601HD in-cockpit landing video
> >
> >
http://www.matronics.com/photoshare/prm@mail2me.com.au.06.01.2003/index.html
>
> Does this .AVI video work for anyone else, or is it just my computer?
> Rick P.
>
>
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: [ Perry Morrison ] : New Email List Photo Share Available! |
--> Zenith-List message posted by: Gary Gower <ggower_99@yahoo.com>
Not with me, I thought maybe because I have telephone conection (not
cable).
To much time dowloading (?) without nothing... someone with cable tell
us how is it?
Saludos
Gary Gower
701 912S
--- Rick <rick.pitcher@verizon.net> wrote:
> --> Zenith-List message posted by: Rick <rick.pitcher@verizon.net>
>
>
> Email List Photo Shares wrote:
> >
> > --> Zenith-List message posted by: Email List Photo Shares
> <pictures@matronics.com>
> >
> > A new Email List Photo Share is available:
> >
> > Poster: Perry Morrison <prm@mail2me.com>
> >
> >
> > Subject: 601HD in-cockpit landing video
> >
> >
>
http://www.matronics.com/photoshare/prm@mail2me.com.au.06.01.2003/index.html
>
> Does this .AVI video work for anyone else, or is it just my computer?
> Rick P.
>
>
>
>
>
>
>
>
__________________________________
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Brett Ray" <brett@hog-air.com>
Thank you for taking time to write us. Your message is very important to us and
we will get back to you shortly. If you need immediate assistance please give
us a call at 1-888-782-7676 in the U.S.A. or 1-618-937-6767 outside.
Thanks
Brett Ray
owner
Hog Air
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: [ Perry Morrison ] : New Email List Photo Share Available! |
--> Zenith-List message posted by: "Jari Kaija" <jari.kaija@pp.inet.fi>
> Not with me, I thought maybe because I have telephone conection (not
> cable).
>
> To much time dowloading (?) without nothing... someone with cable tell
> us how is it?
It hasn't anything to do with xDSL cable or telephone line with
historical modem :-) Works just fine...
This Coomalie.AVI file is created as "Motion JPEG" video file
(I just checked it with "AVIcodec" software, which tels all
information about used video and audio compression methods
in file).
So, your player need to support that kind of video material, or
should I say, you need a right CODEC installed to view this
video with various players. Let's see, what google says about
this video format:
"Motion JPEG codec"
Third answer by google:
>>>>>>>>>>>>>
Morgan Multimedia - Home of the MM MJPEG video codec.
... mjpeg cards MMX, SSE, SSE2, 3DNow!+ and SMP optimizations
MJPEG,MJPG,M-JPEG,Motion
JPEG,M-JPEG2000 JPEG2000 J2K M-JP2K MJ2K MJPEG2000 MJPEG2K codec video codec
...
Kuvaus: Playback hardware M-JPEG AVI files without the specific hardware
codec.
luokkaa: Computers > Multimedia > Digital Video > Software
www.morgan-multimedia.com/
<<<<<<<<<<<<<
-Jari
www.jarikaija.com
www.project-ch701.net
(Spammers! All spam messages will be deleted automatically
from server, so, save your miserable time...)
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finding torque info....? |
--> Zenith-List message posted by: "Cy Galley" <cgalley@qcbc.org>
Look in the back of the Overhaul manual for Tightening Torques. Mine is on
page 80 and 81 just before the full color pages for the oil system.
Cy Galley - Bellanca Champion Club
Newsletter Editor & EAA TC
www.bellanca-championclub.com
Actively supporting Aeroncas
----- Original Message -----
From: <ZodiacBuilder@aol.com>
Subject: Zenith-List: Finding torque info....?
> --> Zenith-List message posted by: ZodiacBuilder@aol.com
>
> Hi List,
> Does anyone know where I can find torque info for a Cont...0-200.
I
> have both the Overhaul manual and the engine manual. Niether have this
info.
> At least not in laymans terms.
>
> Thanks in advance..
>
> John Tarabocchia
>
> http://hometown.aol.com/Zodiacbuilder
>
>
Message 24
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: [ Perry Morrison ] : New Email List Photo Share |
Available!
--> Zenith-List message posted by: Rick <rick.pitcher@verizon.net>
Gary Gower wrote:
>
> --> Zenith-List message posted by: Gary Gower <ggower_99@yahoo.com>
>
> Not with me, I thought maybe because I have telephone conection (not
> cable).
>
> To much time dowloading (?) without nothing... someone with cable tell
> us how is it?
I finally got it, Jari's info on the codec helped.
When I tried it the first time, a message came up saying something
about not being able to download the proper codec. Jari's info led me to
http://www.morgan-multimedia.com/ubb/forum1/clicks_db/download.asp?file=m3jpegv3.exe
I downloaded the file, ran it, and then Microsoft Multimedia Player was
able to play the .AVI just fine :
)
Thanks
Message 25
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Finding torque info....? |
--> Zenith-List message posted by: "Clive Richards" <stephen@crichards.flyer.co.uk>
----- Original Message -----
From: <ZodiacBuilder@aol.com>
Subject: Zenith-List: Finding torque info....?
Hi John Information from Ray Lasnier
The torque information in the Continental manuals is in
inch lbs to get the reading on your torque wrench
divide by 12 to get foot pounds.
From Rays manual tightening torque
Crankcase Through stud 7/16 20 tpi 490-510 inch lbs = 40.8-42.5 ft lbs
Crank case nut 3/8 24 tpi 275-325 inch lbs = 22.9-27.1 ft lbs
Connection Rod Bolts 3/8 24 tpi 400-475 inch lbs = 33.3-39.6 ft lbs
Cylinder Head Nut Small 7/16 20 tpi 490-510 inch lbs 40.8-42.5 ft lbs
Cylinder Head Large nut 3/8 tpi 410-430 inch lbs 34.2-35.8 ft lbs
You will require special spanners for cylinder head nuts to get correct
torque
Ray says ensure you read Page 118-119 of overhaul manual X300-10 1981
Ray suggests you get someone experenced with these engines to work with you,
this should not be a problem in the states.
Clive Richards for Ray Lasnier G CBDG 601HD Continental 0-200 85% hoping to
fit engine mount next week.
> --> Zenith-List message posted by: ZodiacBuilder@aol.com
>
> Hi List,
> Does anyone know where I can find torque info for a Cont...0-200.
I
> have both the Overhaul manual and the engine manual. Niether have this
info.
> At least not in laymans terms.
>
> Thanks in advance..
>
> John Tarabocchia
>
> http://hometown.aol.com/Zodiacbuilder
>
>
Message 26
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: How flat is flat (how much is 1 degree) |
--> Zenith-List message posted by: "Jim Frisby" <marslander@hotmail.com>
Steve,
I hope (and I'm sure) that your table is a lot closer to flat than 1 degree,
1 degree is more than 3/4" over 48".
That said, I agree that 1mm over a 4' x 12' table is much more than good
enough for building this kind of plane. The big thing, is to make sure that
your parts are sitting firmly on the table, weighted down when and where
appropriate.
Jim Frisby
Palmer, AK
Message 27
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Photoshare Video- More Background |
--> Zenith-List message posted by: "Dr. Perry Morrison" <perrymorrison@yahoo.com>
This is some context for the listers who might be interested in the 601HD landing
video I posted recently.
The airstrip is a WWII strip 100km Sth of Darwin. The Northern Territory is littered
with such strips- there being about 8 between this one and Darwin and others
further Sth. Most were bombed many times by the Japanese in WWII. Note that
most of them run N-S even though most people in the NT now have strips E-W. The
"reason" I was once told was because the E-W prevailing winds would make it
hard to get a string of bombs down the centreline. Darwin was attacked in 1942
by
the same fleet that attacked Pearl Harbour and in fact with a larger number of
aircraft. This partic. strip had a mix of beaufighters and mosquitos. I take my
hat
off to them since the hill to the nth makes for a cramped approach and the thought
of landing a damaged bomber over that, at night with flare pots and a 3000'
strip makes me shudder.
Those interested will find a list and further description of raids on Nth Australia
here:
http://www.ozatwar.com/bomboz.htm
Of course the US had a very heavy military presence up here during those years
as well.
Perry Morrison
__________________________
Dr. Perry Morrison
Morrison Associates Pty Ltd
+61 08 89 88 4617
0408892638
perrymorrison@yahoo.com
__________________________
Message 28
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: Tim & Diane Shankland <tshank@megsinet.net>
I am presently setting up the cooling system for my Status Suburu in my
601HD. I have a pair of radiators in with the engine and venting out the
sides. My question is want have builders been using for the expansion
tank . My radiators/heater cores don't have a filler so I don't have a
place on them to put the radiator cap. So far I have found the BMW's
have a whole selection of remote plastic expansion tanks that they use
in many of their cars. I am still trying to pin don't the details on
particular ones. But I am interested how others have solved this problem.
Tim Shankland
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|