---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Mon 12/08/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:03 AM - Re: CH 701/912S Fuel System Questions (Phil & Michele Miller) ________________________________ Message 1 _____________________________________ Time: 03:03:38 AM PST US From: "Phil & Michele Miller" Subject: RE: Zenith-List: CH 701/912S Fuel System Questions --> Zenith-List message posted by: "Phil & Michele Miller" Oops! Looks like I messed up in my conversions between the metric system we use here and your imperial system. Guys, please accept my apologies and disregard my references to head pressure. The references to Rotax fuel pressure requirements are correct as they were quoted directly from the Rotax service documentation. Cheers, Phil Miller New Zealand 701/912S -----Original Message----- From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Thomas F Marson Subject: Re: Zenith-List: CH 701/912S Fuel System Questions --> Zenith-List message posted by: "Thomas F Marson" --> Hi Phil, thanks for the back up. I agree with most of your points except fuel pressure VS/head. I seem to remember 27 inches of water colum is 1 psi since gasoline is lighte than water 27 inches of water would be even less than 1 psi. Where am I wrong on this?