---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Sat 05/29/04: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:06 AM - Re: Top mounted senders (Scott Laughlin) 2. 11:54 AM - Top mounted senders (Bob Gibfried) 3. 01:47 PM - Re: Top mounted senders (Ladyrat01@aol.com) 4. 01:50 PM - Re: Top mounted senders (Ladyrat01@aol.com) ________________________________ Message 1 _____________________________________ Time: 08:06:17 AM PST US From: "Scott Laughlin" Subject: Re: Zenith-List: Top mounted senders --> Zenith-List message posted by: "Scott Laughlin" From: Joemotis@aol.com I am sorry Scott! I forgot to give credit to you. Great site!!! Joe Motis Joe: No credit needed. I clicked on the link without looking at it and it took me a few minutes to realize it was mine! I was looking at the filler and thinking "that fella is going to have the same problem I have with the filler not meeting the wing skin." I was particularly interested because I'm at exactly the same point on the second wing when this photo was taken on the first wing. I have a new idea for a fuel door I'm going to try today and I'll post some photos if it works out. If you have a factory tank, you should have no problem. I didn't add an extension to mine when it was fabricated, so the filler cap is not flush with the wing skin. I've been pondering it for some time and I think I finally have a pretty good solution I can install on the second wing, then retrofit to the first wing. I hope everybody has a productive day of building. Scott Laughlin www.cooknwithgas.com DO NOT ARCHIVE http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ ________________________________ Message 2 _____________________________________ Time: 11:54:11 AM PST US From: "Bob Gibfried" Subject: Zenith-List: Top mounted senders --> Zenith-List message posted by: "Bob Gibfried" Thanks to everyone that replied; and now I'll confess. Finishing up a KR2S (next project is a 601) and current fuel setup is a main header tank with a sight gauge and two wing tanks fed by a Faucet. Did not put senders in the wing tanks, after all the 310 never had gauges on it's wing locker tanks. Now I find I can't get licensed without a gauge on each fuel tank. East way out is a cork and wire through the gas cap. Really want something more sophisticated and I don't want to tear the wing apart. Bob, Wichita ________________________________ Message 3 _____________________________________ Time: 01:47:17 PM PST US From: Ladyrat01@aol.com Subject: Re: Zenith-List: Top mounted senders --> Zenith-List message posted by: Ladyrat01@aol.com get me out of this list you twat ________________________________ Message 4 _____________________________________ Time: 01:50:19 PM PST US From: Ladyrat01@aol.com Subject: Re: Zenith-List: Top mounted senders --> Zenith-List message posted by: Ladyrat01@aol.com weirdo