Today's Message Index:
----------------------
1. 03:35 AM - Wheel Fairings For 601XL (Grant Corriveau)
2. 06:27 AM - Re: Wheel Fairings For 601XL (Paul Moore)
3. 06:28 AM - Re: Anyone selling a CH 801 - kit or one finished and (Larry.Drake@atdf.com.flying??)
4. 07:28 AM - 601 time (john H)
5. 08:48 AM - Geometry 101 (Zed Smith)
6. 09:45 AM - CH 640 For Sale (Eric Parlow)
7. 09:45 AM - Re: Wheel Fairings For 601XL (Larry McFarland)
8. 10:08 AM - Re: Wheel Fairings For 601XL (Bryan Martin)
9. 12:25 PM - Updated Drawings (kevinbonds)
10. 02:01 PM - Re: Wheel Fairings For 601XL (Al Young)
11. 03:33 PM - Re: CH 640 For Sale (Scott Moser)
12. 04:55 PM - Re: Wheel Fairings For 601XL (Jeffrey Glasserow)
13. 05:57 PM - Re: Wheel Fairings For 601XL (Larry McFarland)
14. 09:04 PM - Re: Updated Drawings (Mike Fortunato)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Wheel Fairings For 601XL |
--> Zenith-List message posted by: Grant Corriveau <grantc@ca.inter.net>
> Has anyone on the list found lighter, more streamlined fairings that can be
> fitted to the 601XL tri-gear?
The European dealers have a smaller, narrower version. I think I bought
mine from the Czeck dealer (Chip Irwin?)... the kit was complete with all
attachment hardware etc, and the pants are well made.
--
Grant Corriveau
C-GHTF / HDS / CAM100
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Wheel Fairings For 601XL |
--> Zenith-List message posted by: "Paul Moore" <pmoore505@msn.com>
Somewhere I grabbed a photo of G-DONT - a very pretty XL with some nice
looking, quite trim pants. I don't know if they are ZAC or not but I don't
think you could get any much smaller to work.
Paul Moore
XL - O-200
> Has anyone on the list found lighter, more streamlined fairings that
> can be fitted to the 601XL tri-gear?
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Anyone selling a CH 801 - kit or one finished and |
flying??
--> Zenith-List message posted by: Larry.Drake@atdf.com flying??
check barnstomers theres one for sell on the list.
Larry
-----Original Message-----
From: owner-zenith-list-server@matronics.com
[mailto:owner-zenith-list-server@matronics.com]On Behalf Of Clifford Dow
Subject: Zenith-List: Anyone selling a CH 801 - kit or one finished and
flying??
--> Zenith-List message posted by: Clifford Dow <cdowjr@yahoo.com>
please contact me off the list if you are selling a CH 801 kit or finished one.
i might also consider a CH 701 but would prefer an 801?
i'm in Portland, Maine
Cliff Dow, Jr.
cdowjr@yahoo.com
thanks
DO NOT ARCHIVE
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "john H" <professor71@hotmail.com>
Hi list
I have been more of a lurker than a contributor for the last 2 years as I
have worked on finishing up a 601HD. Yesterday N4036A got it's airworthiness
certificate and is ready to fly. I haven't finished with my pilot license
yet but do have someone who will be the test pilot. He would like to find
someone with who he could get some time in with a 601 before he flies. Is
there anyone in the southwestern part of VA, NC, TN, or KY that would be
willing to let him get some time. Actually he is currently in nortthern VA
so anyone in that area would work also. Thanks for any help you can give.
John
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: Zed Smith <zsmith3rd@earthlink.net>
For those like myself, who are more than a few years away from textbooks, the link
is to a reminder of "How To Draw A Circle" or bisect a whatever.
Might be useful for those who need to find the offset center of some crooked line
or lay out nose/wing/fuselage art.
Click on "Ruler-and-Compass Constructions" when you get there.
http://home.wanadoo.nl/zefdamen/en/overview_en.htm
I found it while looking for an easy way to make a mount (match the bolt circle)
for a slightly bent McCauley prop which will eventually begin a new life as
a wind vane. Do I need to consider "P-factor", depending on wind speed?
zed/701/r912/still working
do not archive
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Zenith-List message posted by: "Eric Parlow" <ericparlow@hotmail.com>
Would you consider a trade for an RV-10 Quickbuild kit?
----Original Message Follows----
From: Scott Moser <moscon@citcom.net>
Subject: Zenith-List: Re: Ch 640-0038 For Sale
--> Zenith-List message posted by: Scott Moser <moscon@citcom.net>
To all Interested parties,
I have decided to sell my Zodiac CH 640 airplane as it is. I have come
to the realization that my time and finances are limited as to the projects
I choose. I currently own and fly a Cessna 172I and can not afford to build
and maintain the two aircraft. I have long range fuel tanks (2) -23 US
Gallons. The Kit consist of all airframe componets down to the tires and
seatbelts etc,,,. My cost are: $24,800.00 for complete kit including fuel
systems; Additional cost I paid are $1,736.00 sales tax; $900.00 long
range fuel tanks; $2,000.00 tail components factory built ; $1,000.00
upgraded fueline (stratoflex SS braided hoses and fittings) plus some tools.
All of these items total $30,436.00. I am asking for the cost of the kit
only $24,800.00. Buyer must arrange to pickup or ship. This airplane is an
great cross country IFR capable platform. Top Speed with an O-360 is
167mph; Cruise is 154 mph according to Zenair LTD in Midland Ontario. Stall
is 30mph with full flaps !
and 40 mph no flaps
The aircraft is in the following status:
1) The right wing is about 80% complete with the aileron bellcrank
assembly, control rod and the cables installed.Both left and right ailerons
are assembled but not installed.
2) The horizontalstabilizer/elevator and /vertical fin/rudder are
factory built and complete with wiring installed.
Digital pics can be sent to anyone wishing to have them.
Regards To All,
Scott Moser
6 Tarah Lane
Pisgah Forest, NC 28768
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Wheel Fairings For 601XL |
--> Zenith-List message posted by: Larry McFarland <larrymc@qconline.com>
Dave,
If the standard XL tri-gear uses the same Matco 4 x 8.00 wheels and
forks, I've just finished right and left high gloss forms
for a pant that is 13.5 high, 7.5 wide and 26.5 long. These curve
narrower at the front and rear and have a slight sweep up to center at
the rear. Still have to make the molds from them and then the product.
I think they look much better than the standard 13.5" x 10" wide by 36"
long pants from ZAC. Completion is several weeks, but pictures will soon
be posted on my site. I'm also going to sell my ZAC pants for $100 as
soon as these are done.
If there's interest, I can do more layups as needed.
Larry McFarland - 601HDS @ www.macsmachine.com
Dave VanLanen wrote:
>--> Zenith-List message posted by: "Dave VanLanen" <davevanlanen@sbcglobal.net>
>
>Has anyone on the list found lighter, more streamlined fairings that can be
>fitted to the 601XL tri-gear?
>Thanks,
>
>Dave Van Lanen
>Madison, WI
>601XL - scheduled for workshop, preparing to order kit
>
>
>
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Wheel Fairings For 601XL |
--> Zenith-List message posted by: Bryan Martin <bryanmmartin@comcast.net>
The XL uses 5 x 5.00 wheels.
on 5/4/05 12:43 PM, Larry McFarland at larrymc@qconline.com wrote:
> --> Zenith-List message posted by: Larry McFarland <larrymc@qconline.com>
>
> Dave,
> If the standard XL tri-gear uses the same Matco 4 x 8.00 wheels and
> forks, I've just finished right and left high gloss forms
>
> Larry McFarland - 601HDS @ www.macsmachine.com
>
> Dave VanLanen wrote:
>
>> --> Zenith-List message posted by: "Dave VanLanen"
>> <davevanlanen@sbcglobal.net>
>>
>> Has anyone on the list found lighter, more streamlined fairings that can be
>> fitted to the 601XL tri-gear?
>> Thanks,
>>
>> Dave Van Lanen
>> Madison, WI
>> 601XL - scheduled for workshop, preparing to order kit
>>
>>
--
Bryan Martin
N61BM, CH 601 XL, Stratus Subaru.
do not archive.
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Updated Drawings |
1.72 MSGID_FROM_MTA_ID Message-Id for external message added locally
--> Zenith-List message posted by: "kevinbonds" <kevinbonds@comcast.net>
I emailed the following to ZAC. Would anyone like to comment?
>>>>>>>>>
I am thinking of purchasing the update drawings. I would like the 15gal tank
option. I've already fabbed the right wing ribs but not spar. I notice that
the direction of the front flange on the RR's have changed. Can I just
rebend the flanges the other way on the ones I have fabbed? Any other
problems I need to be aware of while making the switch to the updated plans?
Kevin Bonds
Nashville TN
601XL Corvair powered;Plansbuilding.
Empenage done; working on wings.
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Wheel Fairings For 601XL |
--> Zenith-List message posted by: "Al Young" <armyret@one-eleven.net>
Larry- I'll be glad to buy your ZAC pants. Let me know
Regards, Al Young- XL ready for inspection
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: CH 640 For Sale |
--> Zenith-List message posted by: Scott Moser <moscon@citcom.net>
YES. I would entertain a trade
Scott Moser
----- Original Message -----
From: "Eric Parlow" <ericparlow@hotmail.com>
Subject: Zenith-List: CH 640 For Sale
> --> Zenith-List message posted by: "Eric Parlow" <ericparlow@hotmail.com>
>
> Would you consider a trade for an RV-10 Quickbuild kit?
>
> ----Original Message Follows----
> From: Scott Moser <moscon@citcom.net>
> To: zenith-list@matronics.com, Scott Moser <moscon@citcom.net>
> Subject: Zenith-List: Re: Ch 640-0038 For Sale
> Date: Mon, 25 Apr 2005 21:38:01 -0400
>
> --> Zenith-List message posted by: Scott Moser <moscon@citcom.net>
>
>
> To all Interested parties,
>
> I have decided to sell my Zodiac CH 640 airplane as it is. I have come
> to the realization that my time and finances are limited as to the
> projects
> I choose. I currently own and fly a Cessna 172I and can not afford to
> build
> and maintain the two aircraft. I have long range fuel tanks (2) -23 US
> Gallons. The Kit consist of all airframe componets down to the tires and
> seatbelts etc,,,. My cost are: $24,800.00 for complete kit including
> fuel
> systems; Additional cost I paid are $1,736.00 sales tax; $900.00 long
> range fuel tanks; $2,000.00 tail components factory built ; $1,000.00
> upgraded fueline (stratoflex SS braided hoses and fittings) plus some
> tools.
> All of these items total $30,436.00. I am asking for the cost of the kit
> only $24,800.00. Buyer must arrange to pickup or ship. This airplane is an
> great cross country IFR capable platform. Top Speed with an O-360 is
> 167mph; Cruise is 154 mph according to Zenair LTD in Midland Ontario.
> Stall
> is 30mph with full flaps !
> and 40 mph no flaps
> The aircraft is in the following status:
> 1) The right wing is about 80% complete with the aileron bellcrank
> assembly, control rod and the cables installed.Both left and right
> ailerons
> are assembled but not installed.
> 2) The horizontalstabilizer/elevator and /vertical fin/rudder are
> factory built and complete with wiring installed.
> Digital pics can be sent to anyone wishing to have them.
>
> Regards To All,
>
> Scott Moser
> 6 Tarah Lane
> Pisgah Forest, NC 28768
>
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Wheel Fairings For 601XL |
clamav-milter version 0.80j
on apollo
--> Zenith-List message posted by: "Jeffrey Glasserow" <jeffglass@starband.net>
Larry, I'm interested in a set of pants for my HDS. Please keep me
informed.
Thanks,
Jeff Glasserow
CH 601 HDS
N6384E
-----Original Message-----
From: owner-zenith-list-server@matronics.com
[mailto:owner-zenith-list-server@matronics.com]On Behalf Of Larry
McFarland
Subject: Re: Zenith-List: Wheel Fairings For 601XL
--> Zenith-List message posted by: Larry McFarland <larrymc@qconline.com>
Dave,
If the standard XL tri-gear uses the same Matco 4 x 8.00 wheels and
forks, I've just finished right and left high gloss forms
for a pant that is 13.5 high, 7.5 wide and 26.5 long. These curve
narrower at the front and rear and have a slight sweep up to center at
the rear. Still have to make the molds from them and then the product.
I think they look much better than the standard 13.5" x 10" wide by 36"
long pants from ZAC. Completion is several weeks, but pictures will soon
be posted on my site. I'm also going to sell my ZAC pants for $100 as
soon as these are done.
If there's interest, I can do more layups as needed.
Larry McFarland - 601HDS @ www.macsmachine.com
Dave VanLanen wrote:
>--> Zenith-List message posted by: "Dave VanLanen"
<davevanlanen@sbcglobal.net>
>
>Has anyone on the list found lighter, more streamlined fairings that can be
>fitted to the 601XL tri-gear?
>Thanks,
>
>Dave Van Lanen
>Madison, WI
>601XL - scheduled for workshop, preparing to order kit
>
>
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Wheel Fairings For 601XL |
--> Zenith-List message posted by: Larry McFarland <larrymc@qconline.com>
Jeff,
I'll certainly post you when the pants are finally laid up and joined so
that they can be evaluated.
Larry
Do not archive
Jeffrey Glasserow wrote:
>--> Zenith-List message posted by: "Jeffrey Glasserow" <jeffglass@starband.net>
>
>Larry, I'm interested in a set of pants for my HDS. Please keep me
>informed.
>Thanks,
>Jeff Glasserow
>CH 601 HDS
>N6384E
>
>-----Original Message-----
>From: owner-zenith-list-server@matronics.com
>[mailto:owner-zenith-list-server@matronics.com]On Behalf Of Larry
>McFarland
>To: zenith-list@matronics.com
>Subject: Re: Zenith-List: Wheel Fairings For 601XL
>
>
>--> Zenith-List message posted by: Larry McFarland <larrymc@qconline.com>
>
>Dave,
>If the standard XL tri-gear uses the same Matco 4 x 8.00 wheels and
>forks, I've just finished right and left high gloss forms
>for a pant that is 13.5 high, 7.5 wide and 26.5 long. These curve
>narrower at the front and rear and have a slight sweep up to center at
>the rear. Still have to make the molds from them and then the product.
>I think they look much better than the standard 13.5" x 10" wide by 36"
>long pants from ZAC. Completion is several weeks, but pictures will soon
>be posted on my site. I'm also going to sell my ZAC pants for $100 as
>soon as these are done.
>If there's interest, I can do more layups as needed.
>
>Larry McFarland - 601HDS @ www.macsmachine.com
>
>Dave VanLanen wrote:
>
>
>
>>--> Zenith-List message posted by: "Dave VanLanen"
>>
>>
><davevanlanen@sbcglobal.net>
>
>
>>Has anyone on the list found lighter, more streamlined fairings that can be
>>fitted to the 601XL tri-gear?
>>Thanks,
>>
>>Dave Van Lanen
>>Madison, WI
>>601XL - scheduled for workshop, preparing to order kit
>>
>>
>>
>>
>
>
>
>
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Updated Drawings |
--> Zenith-List message posted by: Mike Fortunato <rsq2424@yahoo.com>
> Any other problems I need to be aware of while
making
> the switch to the updated plans?
You'll likely have a tough time getting an answer to
that one. A lot depends on which version of the plans
you have now, but there are LOTS of revisions. I asked
the same question to ZAC, but never got a reply. My
main concern was which items are crucial to the safety
of the airframe. It would be great if they would
handle updates much like software, where some are
"critical". If you get an answer to that question,
please post the reply. Thanks!
Mike Fortunato
601XL
do not archive
__________________________________
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|