Today's Message Index:
----------------------
0. 12:13 AM - If You Got This Email, You Haven't Made A Contribution Yet! :-) (Matt Dralle)
1. 09:30 PM - Clarification On New Contribution Module Operation... (Matt Dralle)
2. 04:47 AM - Re: Re: Large format printer referral??? (Debo Cox)
3. 05:52 AM - Re: Large format printer referral??? (Noel Loveys)
4. 08:30 AM - Re: If You Got This Email, You Haven't Made A Contribution Yet! (Gig Giacona)
5. 09:28 AM - 601 lycoming exhaust (Zill Coleman)
6. 09:54 AM - Re: Re: Parking Brake Valve (R.P.)
7. 09:54 AM - 601 /lycoming exhaust Suggestions (TYA2)
8. 10:23 AM - Rib Routing (Perry Delano)
9. 12:06 PM - ()
10. 12:18 PM - Re: Rib Routing (Keith Ashcraft)
11. 01:31 PM - Re: 601 lycoming exhaust (passpat@aol.com)
12. 01:34 PM - Re: Re: Parking Brake Valve (Jaybannist@cs.com)
13. 02:29 PM - Re: Parking Brake Valve (Gig Giacona)
14. 02:39 PM - Re: Re: Parking Brake Valve (Craig Payne)
15. 03:03 PM - Re: Re: Parking Brake Valve (Jaybannist@cs.com)
16. 03:19 PM - Re: Large format printer referral??? (Ron Lendon)
17. 03:50 PM - List Digest E-Mails Not Coming Through (Dave VanLanen)
18. 04:06 PM - Re: List Digest E-Mails Not Coming Through (Carlos Sa)
19. 04:08 PM - Re: Re: Parking Brake Valve (R.P.)
20. 05:19 PM - Tools (Bruno Wright)
21. 10:01 PM - Re: List Digest E-Mails Not Coming Through (Matt Dralle)
Message 0
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | If You Got This Email, You Haven't Made A Contribution Yet! |
:-)
If you received this particular Matronics List Email message, its because you haven't
yet made a Contribution to support your Lists! This is the first PBS-like
funds drive message under the new distribution system. The new system selectively
sends out the Contribution messages ONLY to those that forgot to whip
out the 'ol credit card this year to support the continued operation and upgrade
of the Matronics Email Lists! Don't you wish PBS worked that way? :-)
You heard that right. Once you make your Contribution, these support requests
messages during November will suddenly stop coming to your personal email inbox!
Pardon me if I seem kind of excited about the new feature. I've wanted to
implement something like this for a number of years now, but it was always such
a daunting task to modify the back-end List processing code, that I just kept
putting it off. Finally this year, I just decided to bite the bullet and put
the code-pounding time it to make it work. A few days later, bam! A working
system!
Anyway, I'll stop gushing now. I really do appreciate each and every one of your
individual Contributions to support the Lists. It is your support that enables
me to upgrade the hardware and software that are required to run a List Site
like this. It also goes to pay for the Commercial-Grade Internet connection
and to pay the rather huge electric bill to keep the computer gear running
and the air conditioner powered up.
Your personal Contribution matters because when combined with other Listers such
as yourself, it pays the bills to keep this site up and running. I accept exactly
ZERO advertising dollars for the Matronics Lists sites. I can't stand
the pop-up ads and all other commercialism that is so prevalent on the Internet
these days and I particularly don't want to have it on my Email List site.
I'm pretty sure you don't either.
If you appreciate the ad-free, grass-roots, down-home feel of the Matronics Email
Lists, please make a Contribution today to keep it that way!!
http://www.matronics.com/contribution
Thank you!
Matt Dralle
Matronics Email List Administrator
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Clarification On New Contribution Module Operation... |
Dear Listers,
A number of Listers emailed and indicated that, even though they had made a Contribution
this year, they still received the Contribution message yesterday.
I looked into it and I found a slight anomaly (ok, bug) in the new code specifically
as it related to Listers that had made their Contribution through PayPal
AND have a DIFFERENT email address for their PayPal account and for their Matronics
List subscription.
If your PayPal account email address is DIFFERENT than the email address you are
subscribed to the Matronics List(s) as, then my new code module couldn't tell
that you had made a Contribution, since it was using the PayPal email address
instead of the List email.
I've fixed this issue for any new PayPal Contributions, but I don't have any easy
way of resolving this for any of the previous Contribtuions. Again, this is
ONLY an issue if your PayPal and Matronics List email addresses ARE NOT the
same. Otherwise, everything works great.
If you made a PayPal Contribution before 11/09/06 AND your email addresses don't
match, please drop me an email at " info@matronics.com " (do not reply to this
message!) and give me your Name, and both Email Addresses and I will manually
update the records so that things will work as advertised.
Sorry for the hassle! New code; new bugs... :-)
To make a Contribution, please see: http://www.matronics.com/contribution
Thank you!
Matt Dralle
Matronics Email List Administration
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Large format printer referral??? |
Thanks for the help guys. I've got a couple of options now to get these printed
out. Good stuff.
Debo Cox
Nags Head, NC
XL/Corvair
do not archive
---------------------------------
Sponsored Link
Free Uniden 5.8GHz Phone System with Packet8 Internet Phone Service
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Large format printer referral??? |
Check with the folks who make the decals for customizing cars they have
huge
ink jet printers. Another place to try is just about any engineering
company. They use plotters to draw blueprints. I guess the days of the
ammonia blueprint machines are gone!
Noel
-----Original Message-----
From: owner-zenith-list-server@matronics.com
[mailto:owner-zenith-list-server@matronics.com] On Behalf Of Debo Cox
Sent: Tuesday, November 07, 2006 3:00 PM
Subject: Zenith-List: Large format printer referral???
Hi guys,
I've got a some jpeg files that contain full-size layouts for all of the
rear wing ribs on an XL. My plan is to print these out and use some
spray
adhesive to tack them to the wood I'll use as form blocks (as a lot of
builders have done). Here's the problem - printing those boys out!
Does anyone know a place where I might be able to email my files and
have
them print out large format paper printouts? I live in a really remote
place
on the Outer Banks of North Carolina, and if I can just have the images
printed out and shipped to me, it'll save me several hours drive time
and
expense.
Even if there's a good printer in your town that is familiar with the
job,
I'd appreciate a phone number or website address. Thanks guys. Keep
drillin'.
Debo Cox
Nags Head, NC
XL/Corvair
Working on wing spar #2
Do not archive
_____
We have the perfect Group for you. Check out the handy
<http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=41144/*http://groups.y
ahoo.
com/local/newemail.html> changes to Yahoo! Groups.
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: If You Got This Email, You Haven't Made A Contribution |
Yet!
Unfortunatly those of us that have donated still have to read about it on the forum.
:?
--------
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=73130#73130
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 601 lycoming exhaust |
Will a C-150 exhaust system fit properly onto a 601 with a Lycoming 235?
Does anyone have any recommendations about where to buy an exhaust
system that will fit? Swapping Subaru for 0 235.
Z coleman
601 HDS
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Parking Brake Valve |
----- Original Message -----
From: "Gig Giacona" <wr.giacona@cox.net>
Sent: Tuesday, November 07, 2006 12:32 PM
Subject: Zenith-List: Re: Parking Brake Valve
>
> zodie,
>
> I have no idea what you posted but what ever it was not viewable via the
> Web interface. No text, no pic, nothing.
>
That's strange, it came through on the email list...
The pics are a couple of 1/4" brass ball valves ganged together for a
hydraulic parking brake valve. I'll try to post the URLs again and see if
they get through
http://www.lightflyers.com/4j.jpg
http://www.lightflyers.com/4h.jpg
Rick Pitcher
CH601HD/3300
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 601 /lycoming exhaust Suggestions |
Here is the deal on Lycoming 0-235 exhaust systems. Zenair and AMD sell a
4 into 1 crossover exhaust system with shrouds for the AMD Alarus
CH2000. Same aircraft different names, and a certified aircraft. Comes
complete with shrouds for carb heat and cabin heat. This is a complete
bolt on system for the 0-235 including the short stacks to the
cylinders. A fairly simple system. The hardest point was getting the
hole for exhaust stack right on my CH2000. This system replaces single
side systems that the CH2000 came with. I still have one good one and one
repairable one (if you a welder!!!!) . The Lycoming 0-235 is used in
Cessna 152s, Tomahawks, and Skippers if you are looking for used aircraft
exhaust systems. The Cessna 150 uses a Continental 0-200 and I can't say
a 150 exhaust system will work on Lycoming...
If you don't know what you are doing, call AMD and ask if there
CH2000/Alarus system will fit on a 601. If it does buy it. I do not
regret my new system, although I liked the old system's simplicity
better. Leaking exhaust systems can kill you. I live in an area where
cabin heat and defrost are essential. My life or my family members lives
are not worth fooling around with, carbon monoxide sucks...
Reg Lukasik, Edmonton, Alberta
1995 CH2000 with the latest Zenith AMD exhaust system...
At 11:37 AM 11/8/2006 -0600, you wrote:
>Will a C-150 exhaust system fit properly onto a 601 with a Lycoming
>235? Does anyone have any recommendations about where to buy an exhaust
>system that will fit? Swapping Subaru for 0 235.
>
>Z coleman
>
>601 HDS
>
>www.aeroelectric.com
><http://www.buildersbooks.com>www.buildersbooks.com
><http://www.matronics.com/contribution>http://www.matronics.com/contribution
><http://www.matronics.com/Navigator?Zenith-List>http://www.matronics.com/Navigator?Zenith-List
>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
With respect to using a router to cut aluminum you might check out "rib
routing" on Murray Johnson's website (murrayjohnson.com). Seems as
though someone
from the RAA (Canada) has been giving demos of what appears to be a very
effective method
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Also,
Try and see if this link will work. I put 3 pictures that show my
Flaperon rear rib router template, then a closeup picture showing a
stackup of several 0.016" pieces, and then a final rib blank with a
formed rib.
See if it works.
http://ph.groups.yahoo.com/group/701builders/photos/browse/637b?c
If it doesn't, I will post directly to Matronics photoshare.
Keith
CH701 -- still trying to scratch build
N 38.9947
W 105.1305
Alt. 9,100'
temp -- mid 70s, (what's up with that)
******************************************************************
Perry Delano wrote:
>
>With respect to using a router to cut aluminum you might check out "rib
>routing" on Murray Johnson's website (murrayjohnson.com). Seems as
>though someone
>from the RAA (Canada) has been giving demos of what appears to be a very
>effective method
>
>
>
>
--
*************************************
*Keith Ashcraft*
ITT Industries
Advanced Engineering & Sciences
5009 Centennial Blvd.
Colorado Springs, CO
80919
(719) 599-1787 -- work
(719) 332-4364 -- cell
keith.ashcraft@itt.com
************************************
This e-mail and any files transmitted with it are proprietary and intended solely
for the use of the individual or entity to whom they are addressed. If you have
received this e-mail in error please notify the sender. Please note that any views
or opinions presented in this e-mail are solely those of the author and do not
necessarily represent those of ITT, Inc. The recipient should check
this e-mail and any attachments for the presence of viruses. ITT accepts
no liability for any damage caused by any virus transmitted by this e-mail.
************************************
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: 601 lycoming exhaust |
vetterman rv-9 for the o-235 works
-----Original Message-----
From: zill@pinnacletrans.com
Sent: Wed, 8 Nov 2006 12:37 PM
Subject: Zenith-List: 601 lycoming exhaust
Will a C-150 exhaust system fit properly onto a 601 with a Lycoming 235? Does
anyone have any recommendations about where to buy an exhaust system that will
fit? Swapping Subaru for 0 235.
Z coleman
601 HDS
________________________________________________________________________
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Parking Brake Valve |
Gig, You must have something wrong that is unique to your system. Both of Zodie's
posts came through just fine to me, including the photos.
Jay in Dallas
"Gig Giacona" <wr.giacona@cox.net> wrote:
>
>Just for the record Zodie your last post was blank on the forum as well.
>
>--------
>W.R. "Gig" Giacona
>601XL Under Construction
>See my progress at www.peoamerica.net/N601WR
>
>
>Read this topic online here:
>
>http://forums.matronics.com/viewtopic.php?p=73172#73172
>
>
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Parking Brake Valve |
Jay, I don't think you are reading them via the Web Forum Interface at forums.matronics.com.
I've sent Matt and e-mail about it.
Jaybannist(at)cs.com wrote:
> Gig, You must have something wrong that is unique to your system. Both of Zodie's
posts came through just fine to me, including the photos.
>
> Jay in Dallas
>
> "Gig Giacona" wrote:
>
>
> >
> >
> > Just for the record Zodie your last post was blank on the forum as well.
> >
> > --------
> > W.R. "Gig" Giacona
> > 601XL Under Construction
> > See my progress at www.peoamerica.net/N601WR
> >
> >
> >
> >
> > Read this topic online here:
> >
> > http://forums.matronics.com/viewtopic.php?p=73172#73172
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
--------
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=73200#73200
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Parking Brake Valve |
>> unique to your system
Except that Zodie's recent messages show empty in the web site too.
-- Craig
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Parking Brake Valve |
Craig & Gig, I'm not up on various places to read stuff, but I am reading it on
my e-mail provider under "zenith-list@matronics.com", and it has come through
just fine.
Jay in Dallas
"Craig Payne" <craig@craigandjean.com> wrote:
>
>>> unique to your system
>
>Except that Zodie's recent messages show empty in the web site too.
>
>-- Craig
>
>
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Large format printer referral??? |
Debo,
I just tabulated the time it took me to make all the forms fot the entire plane.
In 51 hours, I layed out, cut, ground, radiused and poly sealed all the forms.
Just thought you might want to know. It is pretty easy.
--------
Ron Lendon, Clinton Township, MI
Corvair Zodiac XL, ScrapBuilder ;-)
http://www.mykitlog.com/rlendon
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=73217#73217
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | List Digest E-Mails Not Coming Through |
I have not received list digest e-mails for several days. Is something
broken on the Matronics list, or do I have something wrong on my end?
Thanks,
Dave Van Lanen
Do not archive
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: List Digest E-Mails Not Coming Through |
Have you made your contribution yet? ;-)
do not archive
Carlos
On 08/11/06, Dave VanLanen <davevanlanen@sbcglobal.net> wrote:
>
> I have not received list digest e-mails for several days. Is something
> broken on the Matronics list, or do I have something wrong on my end?
>
> Thanks,
>
> Dave Van Lanen
>
> Do not archive
>
> *
> *
>
>
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Parking Brake Valve |
----- Original Message -----
From: "Gig Giacona" <wr.giacona@cox.net>
Sent: Wednesday, November 08, 2006 2:27 PM
Subject: Zenith-List: Re: Parking Brake Valve
>
> Jay, I don't think you are reading them via the Web Forum Interface at
> forums.matronics.com.
>
> I've sent Matt and e-mail about it.
You're right Gig, I checked the forum website and found the blank messages.
wierd, ain't it?
Oh well, at least the brake valves work better than the web interface....
do not archive
Rick Pitcher
zodie@adelphia.net
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Just a quick note on sanding/shaping tools. Here is something invaluable,
cost a few $ but worth it, http://www.radiusmaster.com.au/ unfortunately for
most of you guys it is in Aus.
And yes, He who dies with the most tools wins.
Bruno Wright
1 up and another started.
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: List Digest E-Mails Not Coming Through |
Hey Dave,
You appear to be subscribed to the Zenith-List-Digest alright as "davevanlanen@sbcglobal.net".
Let me know if you don't get tonight Digest email. Email me
directly at dralle@matronics.com.
Best regards,
Matt Dralle
At 03:48 PM 11/8/2006 Wednesday, you wrote:
>I have not received list digest e-mails for several days. Is something broken
on the Matronics list, or do I have something wrong on my end?
>
>Thanks,
>
>Dave Van Lanen
>
>Do not archive
Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|