Today's Message Index:
----------------------
1. 05:05 AM - Re: Strapping the Stab (DaveG601XL)
2. 06:24 AM - Zenith Zip 2007 (Ettore Petaccia)
3. 06:40 AM - Re: Maintenance Manual (Charles Wacker)
4. 07:12 AM - Oil Pressure Switch (Jeffrey A Beachy)
5. 07:22 AM - Re: Oil Pressure Switch (NYTerminat@aol.com)
6. 10:05 AM - Re: Maintenance Manual (japhillipsga@aol.com)
7. 10:16 AM - Re: Re: LRI pickup (japhillipsga@aol.com)
8. 11:16 AM - Re: LRI pickup (Gig Giacona)
9. 11:40 AM - Re: wing extentions (Peter Fox)
10. 12:03 PM - Re: Maintenance Manual (Pete Krotje)
11. 01:12 PM - Re: Maintenance Manual (Southern Reflections)
12. 01:34 PM - Firewall angle (was Maintenance Manual) (Craig Payne)
13. 01:39 PM - Re: wing extentions (ROBERT SCEPPA)
14. 03:02 PM - test (Southern Reflections)
15. 03:14 PM - Re: Misdirected emails (do not archive) (R.P.)
16. 03:41 PM - Re: Re: Longeron bender (Bill Naumuk)
17. 06:23 PM - XL Center console (Tim Juhl)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Strapping the Stab |
Ron,
I had the pre-drilled skin like you and I remember this going fairly easily.
From what I remember, when the line on the front spar flange was visible, the
aft edge of the skin lined up nicely with the rear spar trailing edge. After
you get it strapped and everything is level, sqaure and not twisted as referenced
in the guides, go ahead and trial fit the end ribs to get the warm fuzzy that
it looks right before drilling.
Good luck,
DaveG
--------
David Gallagher
601 XL, tail and wings completed,
starting fueslage.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=100252#100252
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
"Title: Zenith Zip 2007
The RAA Toronto chapter will be hosting the Zenith Zip 2007 at the
Brampton airport, May 19-21. This event will appeal to all Zenith owners
and enthusiasts, as well as to everyone who "would rather be flying"!
Activities include lunch, construction and other technical workshops,
pilot recurrency, exhibits by the sponsors, tire-kicking, BBQ dinner and
social. Event is on Saturday and Sunday, Monday as a rain day. Possibility
of lodging locally or camping under the wing. Info: Pierre Tanguay (613)
687-0037, pierre12@magma.ca or Alain Ouellet, (905) 458-5424,
aouellet@icecanada.com."
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Maintenance Manual |
You should have recieved one on a cd with the engine as well as a parts list
on cd.
Chuck Wacker\601XL Quick Build
>From: "robert stone" <rstone4@hot.rr.com>
>To: "Zenith list" <zenith-list@matronics.com>
>Subject: Zenith-List: Maintenance Manual
>Date: Mon, 12 Mar 2007 19:03:39 -0500
>
>Members,
> So far I have written three e-mails to Jabiru asking questions and
>have yet to receive an answer. The last one was, is there a maintenance
>manuel available for the Jabiru 3300 engine. If anyone out there knows if
>a manuel is available and where I could get one I would be greatfull. I am
>going to try to contact Jabiru direct in Austraula and see if I can get
>some answers.
>
>Tracy Stone
_________________________________________________________________
Mortgage rates as low as 4.625% - Refinance $150,000 loan for $579 a month.
Intro*Terms
https://www2.nextag.com/goto.jsp?product=100000035&url=%2fst.jsp&tm=y&search=mortgage_text_links_88_h27f6&disc=y&vers=743&s=4056&p=5117
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Oil Pressure Switch |
Anyone use the oil pressure switch from Lockwood for their Hobbs meter?
If yes, how is the wiring hooked up?
Jeff Beachy
CH701
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Oil Pressure Switch |
I just wired my Hobbs to the Alternator switch. The only time that I use the
Alt switch is when I run the engine. If you already have the switch, it is a
normally open switch and will close when you apply oil pressure. Connect the
ground lead of the Hobbs to the oil pressure switch and that will activate
it when the engine is running. Obviously you need +12v to the other side of
the Hobbs meter which should be fused and connected through your Power switch.
Bob Spudis
N701ZX/ waiting for the snow to clear and the ground to dry up
In a message dated 3/13/2007 10:14:02 A.M. Eastern Daylight Time,
beachyjeff@juno.com writes:
Anyone use the oil pressure switch from Lockwood for their Hobbs meter?
If yes, how is the wiring hooked up?
Jeff Beachy
CH701
<BR><BR><BR>**************************************<BR> AOL now offers free
email to everyone. Find out more about what's free from AOL at
http://www.aol.com.
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Maintenance Manual |
Tracy, when you buy an engine the CD comes with the installation and maintenance
data. I'm sure the Jab folks would sell you one. Also, if you try Pete at Jab
Tennessee and get nothing try Andy at Jab Florida (Suncoast ?). Sometimes he
can help when the Tennessee folks are elsewhere, Best of luck, Bill of Georgia
-----Original Message-----
From: ccwacker@HOTMAIL.COM
Sent: Tue, 13 Mar 2007 8:39 AM
Subject: RE: Zenith-List: Maintenance Manual
You should have recieved one on a cd with the engine as well as a parts list on
cd.
Chuck Wacker\601XL Quick Build
>From: "robert stone" <rstone4@hot.rr.com>
>To: "Zenith list" <zenith-list@matronics.com>
>Subject: Zenith-List: Maintenance Manual
>Date: Mon, 12 Mar 2007 19:03:39 -0500
>
>Members,
> So far I have written three e-mails to Jabiru asking questions and >have yet
to receive an answer. The last one was, is there a maintenance >manuel available
for the Jabiru 3300 engine. If anyone out there knows if >a manuel is available
and where I could get one I would be greatfull. I am >going to try to contact
Jabiru direct in Austraula and see if I can get >some answers.
>
>Tracy Stone
_________________________________________________________________
Mortgage rates as low as 4.625% - Refinance $150,000 loan for $579 a month. Intro*Terms
https://www2.nextag.com/goto.jsp?product=100000035&url=%2fst.jsp&tm=y&search=mortgage_text_links_88_h27f6&disc=y&vers=743&s=4056&p=5117
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL
at AOL.com.
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Dan, I flew my XL this morning in prep for my Biannual flight review this weekend
and the LRI is a charm at power off stalls. Just as the needle goes into the
red I feel the bumping. I made a "short field" landing with full flaps and the
needle at the line between red and yellow and touchdown on a dime. I think
Scott made the probe I installed and I got the dial face from him. Power on stalls
are real problem with my XL. The Jab 3300 just pulls you over past vertical
into a loop. Maybe I need to start slower ? Best regards and I recommend LRI.
Bill of Georgia
-----Original Message-----
From: dj45@modempool.com
Sent: Mon, 12 Mar 2007 3:01 PM
Subject: Zenith-List: Re: LRI pickup
Sorry Guys,
I just got off the phone with the machinist and he wants $70 each for the LRI.
Scott Laughlin (cookingwithgas@hotmail.com)sells them for $50 plus the face and
instructions. So I guess that would be the way to go.
Scott is trying to get his plane in the air, so maybe it will be awhile before
he can get too them. If you just can't wait, this guy can do them now.
I got more time than money, If you are short on time let me know.
--------
Do not archive
Dan Stanton
90% done 90% to go
801, Deltahawk Diesel
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=100097#100097
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL
at AOL.com.
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I've not yet had the chance to have the problem in a 601 but I have flown planes
that did the same thing. And you are right, slow down before you begin.
What you are trying to duplicate in a power on stall is a stall shortly after takeoff
so slow down to just above your normal take off speed say about 10% above
it.
japhillipsga(at)aol.com wrote:
> Power on stalls are real problem with my XL. The Jab 3300 just pulls you over
past vertical into a loop. Maybe I need to start slower ? Best regards and I
recommend LRI. Bill of Georgia
>
> --
--------
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=100315#100315
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: wing extentions |
hello Brian
i"m new to this site
a buddy of mine and his girl helped me set up on this bbs
any how let me see if i can shed some light on your query
as far as i can tell from my many years studying this problem
a (wing extension )is a bit like those spam e-mails you get
that promise to extend other longeron /spars ,might i say
in this aspect /ratio its all about the lift you get from a bigger wing...
your truly
Les Apt
On 3/3/07, Brian Bowen <brianbowen_@hotmail.com> wrote:
>
>
> Hi,
> I read a few days back , someone was looking for info on wing extentions
> for the CH701.
> I am also interested but can't find it in the archive. Any help would be
> appreciated.
> Thanks
> Brian
>
> _________________________________________________________________
> Win a trip for four to a concert anywhere in the world!
> http://www.mobilelivetour.ca/
>
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Maintenance Manual |
Jabiru engine maintenance, installation, and parts manuals are available on
the Jabiru USA web site www.usjabiru.com <http://www.usjabiru.com/> in the
service bulletin & manual section. Also at Sun Coast Sport planes web site
www.suncoastjabiru.com <http://www.suncoastjabiru.com/> , also on the west
coast Jabiru dealer site www.jabirupacific.com
<http://www.jabirupacific.com/> , and also on the Jabiru factory site
www.jabiru.net.au <http://www.jabiru.net.au/> . The manuals are probably on
more Jabiru dealer sites as well. Just go to one and download.
Pete Krotje
Jabiru USA Sport Aircraft, LLC
_____
From: owner-zenith-list-server@matronics.com
[mailto:owner-zenith-list-server@matronics.com] On Behalf Of
japhillipsga@aol.com
Sent: Tuesday, March 13, 2007 12:04 PM
Subject: Re: Zenith-List: Maintenance Manual
Tracy, when you buy an engine the CD comes with the installation and
maintenance data. I'm sure the Jab folks would sell you one. Also, if you
try Pete at Jab Tennessee and get nothing try Andy at Jab Florida (Suncoast
?). Sometimes he can help when the Tennessee folks are elsewhere, Best of
luck, Bill of Georgia
-----Original Message-----
From: ccwacker@HOTMAIL.COM
Sent: Tue, 13 Mar 2007 8:39 AM
Subject: RE: Zenith-List: Maintenance Manual
<javascript:parent.ComposeTo(> >
You should have recieved one on a cd with the engine as well as a parts list
on cd.
Chuck Wacker\601XL Quick Build
>From: "robert stone" < <javascript:parent.ComposeTo(> rstone4@hot.rr.com>
>To: "Zenith list" <zenith-list@matronics.com <javascript:parent.ComposeTo(>
>
>Subject: Zenith-List: Maintenance Manual
>Date: Mon, 12 Mar 2007 19:03:39 -0500
>
>Members,
> So far I have written three e-mails to Jabiru asking questions and >have
yet to receive an answer. The last one was, is there a maintenance >manuel
available for the Jabiru 3300 engine. If anyone out there knows if >a manuel
is available and where I could get one I would be greatfull. I am >going to
try to contact Jabiru direct in Austraula and see if I can get >some
answers.
>
>Tracy Stone
_________________________________________________________________
Mortgage rates as low as 4.625% - Refinance $150,000 loan for $579 a month.
Intro*Terms
<https://www2.nextag.com/goto.jsp?product=100000035&url=%2fst.jsp&tm=y&searc
h=mortgage_text_links_88_h27f6&disc=y&vers=743&s=4056&p=5117>
https://www2.nextag.com/goto.jsp?product=100000035&url=%2fst.jsp&tm=y&search
=mortgage_text_links_88_h27f6&disc=y&vers=743&s=4056&p=5117
_____
size=2 width="100%" align=center>
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Maintenance Manual |
off subject.. help help what is the angle that the firewall is supose to
lean back on a601 XL THANKS Joe N101HD
----- Original Message -----
From: "R.P." <zodie@adelphia.net>
Sent: Monday, March 12, 2007 8:12 PM
Subject: Re: Zenith-List: Maintenance Manual
>
> Try this page for downloads
> http://jabiru.net.au/service%20bulletinbodyFrame-1.htm
>
> Rick Pitcher
>
>
> ----- Original Message -----
> From: "robert stone" <rstone4@hot.rr.com>
> To: "Zenith list" <zenith-list@matronics.com>
> Sent: Monday, March 12, 2007 5:03 PM
> Subject: Zenith-List: Maintenance Manual
>
>
> Members,
> So far I have written three e-mails to Jabiru asking questions and
> have yet to receive an answer. The last one was, is there a maintenance
> manuel available for the Jabiru 3300 engine. If anyone out there knows if
> a manuel is available and where I could get one I would be greatfull. I
> am going to try to contact Jabiru direct in Austraula and see if I can get
> some answers.
>
> Tracy Stone
>
>
>
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Firewall angle (was Maintenance Manual) |
I think 6B15 (6/2003 version) shows what you need in the upper right corner:
77 degrees from the top longeron with the cabin floor 3 degrees up from
level.
-- Craig
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: wing extentions |
> Don't fix what ain't broke....do not archive
--- Peter Fox <foxatgibsons@gmail.com> wrote:
> hello Brian
> i"m new to this site
> a buddy of mine and his girl helped me set up on
> this bbs
> any how let me see if i can shed some light on your
> query
> as far as i can tell from my many years studying
> this problem
> a (wing extension )is a bit like those spam e-mails
> you get
> that promise to extend other longeron /spars ,might
> i say
> in this aspect /ratio its all about the lift you get
> from a bigger wing...
> your truly
> Les Apt
>
>
> On 3/3/07, Brian Bowen <brianbowen_@hotmail.com>
> wrote:
> >
> <brianbowen_@hotmail.com>
> >
> > Hi,
> > I read a few days back , someone was looking for
> info on wing extentions
> > for the CH701.
> > I am also interested but can't find it in the
> archive. Any help would be
> > appreciated.
> > Thanks
> > Brian
> >
> >
>
_________________________________________________________________
> > Win a trip for four to a concert anywhere in the
> world!
> > http://www.mobilelivetour.ca/
> >
> >
> >
> >
> >
> >
>
It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.
http://tools.search.yahoo.com/toolbar/features/mail/
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
test test
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Misdirected emails (do not archive) |
----- Original Message -----
From: "Fred Johnson" <kar.fre@verizon.net>
>Rick, It looks like I did the same thing sorry every one.
>Fred
> Do not archive
Hehe... that's OK Fred, If I hadn't mistakenly posted my message to John to
the Zenith list I wouldn't have recieved your response.
It all turned out well :)
See you guys soon at APV,
Rick
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Longeron bender |
Ron+All-
I'm not reinventing the wheel, I'm trying to combine the good points of
different ways to do something while avoiding the bad. The main thing is,
I'm pleased about all the ideas. I'll wind up with a jig that's a
combination of what's been done in the past with a smidgen of my own input.
do not archive
Bill Naumuk
HDS Fuse/Corvair
Townville, Pa
----- Original Message -----
From: "Ron Lendon" <rlendon@comcast.net>
Sent: Monday, March 12, 2007 10:05 PM
Subject: Zenith-List: Re: Longeron bender
>
> Thats the way to do it Bill. Metal has spring back and always needs to be
> bend a little farther than the final result. Do as Larry says, sneak up
> on it a little at a time. That setup will give you the control you need.
>
> --------
> Ron Lendon, Clinton Township, MI
> Corvair Zodiac XL, ScrapBuilder ;-)
> http://www.mykitlog.com/rlendon
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=100205#100205
>
>
>
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | XL Center console |
Has anyone got a good picture looking down into the center console with the top
off? I need something showing the stick installed and the rudder and elevator
cable routing. Email me off list if you can help.
Thanks!
Tim
--------
DO NOT ARCHIVE
______________
CFII
Champ L16A flying
Zodiac XL - Jabiru 3300A
Working on wings
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=100384#100384
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|