---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Wed 04/18/07: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:11 AM - Re: Higher gross on 701 (jetboy) 2. 02:42 AM - Re: Adding Duct Tape to the Toolbox (601HDS Ribs to Spar) (David Downey) 3. 03:48 AM - Re: spray foam insulation to secure l.e. fuel tanks (kkinney) 4. 06:00 AM - Re: Visit to Holland (hansriet) 5. 06:51 AM - Re: spray foam insulation to secure l.e. fuel tanks (R.P.) 6. 07:32 AM - Re: Hand Prop Jabiru 2200 (R.P.) 7. 08:08 AM - Re: Hand Prop Jabiru 2200 (Gig Giacona) 8. 08:25 AM - CH801 kit components for sale (Gary Craze) 9. 08:33 AM - Re: Re: Hand Prop Jabiru 2200 (R.P.) 10. 09:45 AM - Re: Hand Prop Jabiru 2200 (Gig Giacona) 11. 12:16 PM - LRI probes (Mark Sherman) 12. 12:47 PM - Re: LRI probes (John Bolding) 13. 01:07 PM - Re: Re: Hand Prop Jabiru 2200 (n801bh@netzero.com) 14. 01:46 PM - Re: Hand Prop Jabiru 2200 (Gig Giacona) 15. 08:16 PM - Items for sale (tjlhl) ________________________________ Message 1 _____________________________________ Time: 12:11:54 AM PST US Subject: Zenith-List: Re: Higher gross on 701 From: "jetboy" What you are asking for is designated CH750. The 701 is already maxxed out from the original 880 lbs design. In some countries you can fly above max. design wt. but with a reduced G limit - ZAC provide the calculations for this on their website, but you would be better to wait for the availability of the 750 or 801. Ralph -------- Ralph - CH701 / 2200a Read this topic online here: http://forums.matronics.com/viewtopic.php?p=107694#107694 ________________________________ Message 2 _____________________________________ Time: 02:42:58 AM PST US From: David Downey Subject: Re: Zenith-List: Adding Duct Tape to the Toolbox (601HDS Ribs to Spar) Thanks Mitch! do not archive "Hodges, Mitch" wrote: As requested, here are photos and an explanation of how I used a roll of duct tape to drill the nose and rear ribs for the HDS: Dave Downey Harleysville (SE) PA Zodiac 601XL/Corvair? --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos. ________________________________ Message 3 _____________________________________ Time: 03:48:39 AM PST US Subject: Zenith-List: Re: spray foam insulation to secure l.e. fuel tanks From: "kkinney" Before you use spray foam, I'd recommend you search the archives. A member used it under some flashing. The problem was that spray foam doesn't stop expanding for quite a while. The flashing didn't stay in the shape it was supposed to. Good idea, but if you use it, I'd recommend you experiment with it first. Regards, Kevin Kinney Read this topic online here: http://forums.matronics.com/viewtopic.php?p=107701#107701 ________________________________ Message 4 _____________________________________ Time: 06:00:24 AM PST US Subject: Zenith-List: Re: Visit to Holland From: "hansriet" Hi Mark, How is Almere nowadays? I used to live there until I moved to the US in '99. Hans Read this topic online here: http://forums.matronics.com/viewtopic.php?p=107710#107710 ________________________________ Message 5 _____________________________________ Time: 06:51:54 AM PST US From: "R.P." Subject: Re: Zenith-List: spray foam insulation to secure l.e. fuel tanks ----- Original Message ----- From: "Frank Probst" Sent: Tuesday, April 17, 2007 8:19 PM Subject: Zenith-List: spray foam insulation to secure l.e. fuel tanks > > Has any one ever tried this? It would seem like a good way to make sure > the tanks don't move and rub. There is the stuff for doors and windows. > It does not expand. Put some in between the tank and ribs and the spar. > The only concern would be some kind of a corrosive effect on the aluminum. > > Frank Probst > > I don't think the foam itself would be corrosive, but you moisture will get trapped between the foam/aluminum sandwich. THAT will cause some corrosion problems. The foam would also be susceptable to being washed away with any fuel spills that might seep in when you over-fill the tank or take off with topped off tanks. Better stick with the cork. Rick ________________________________ Message 6 _____________________________________ Time: 07:32:33 AM PST US From: "R.P." Subject: Re: Zenith-List: Hand Prop Jabiru 2200 ----- Original Message ----- From: "George Race" Sent: Tuesday, April 17, 2007 4:43 PM Subject: Zenith-List: Hand Prop Jabiru 2200 >I recall reading somewhere that it is not possible to hand prop and start a > Jabiru 2200 due to requiring about 300 RPM to develop enough spark to > start > the engine. > > If indeed this is the case, has anyone developed an auxiliary ignition > system that would allow one to hand prop/start the engine? > > Would hate to be caught out in the boonies, on the ground, with a dead > battery. > > George > Working on the left wing. > CH-701 N73EX (reserved) > There have been a few people that have adapted an automotive aftermarket ignition system to their Jabiru's, but an easier (better?) way would be to add an additional lightweight Oddesey battery for back-up. Rick 601HD/Jabiru 3300 ________________________________ Message 7 _____________________________________ Time: 08:08:48 AM PST US Subject: Zenith-List: Re: Hand Prop Jabiru 2200 From: "Gig Giacona" rickpitcher, you've had two messages I've noticed that were blank. The one in this thread and the one in the thread about foam for fueal tanks. DO NOT ARCHIVE -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=107731#107731 ________________________________ Message 8 _____________________________________ Time: 08:25:20 AM PST US From: "Gary Craze" Subject: Zenith-List: CH801 kit components for sale Due to other time and family commitments, I've decided to sell my Zenith CH801 project. Here is what I have: - Wings Kit (Zenith price: $6245) - Fuel System Kit (Zenith price: $1225) - Tail Kit (Zenith price: $1750) - Nav/Strobe Kit (Zenith price: $465) - Nice 4' x 12' work table. * I have not purchased the remaining component kits ( fuselage, gear, etc) The total Zenith price for the above components (not counting shipping or taxes) is just under $9700. I'm asking $8000 for everything (including the table if you want it). Current state of the project: - I've only started on the Tail Kit. The rudder is 100% complete, and the horizontal stabilizer is about half done. - The wing kit and fuel kit is still in the factory crate. Given that the rudder is complete and the horizontal stab is sitting in the jig, I don't want to ship anything. I live in Houston, TX and I'll deliver within the regional area (Houston, Dallas, San Antonio, etc.) for $1 per round-trip mile. Many thanks, Gary Craze 281-455-9226 garycraze@hotmail.com ________________________________ Message 9 _____________________________________ Time: 08:33:45 AM PST US From: "R.P." Subject: Re: Zenith-List: Re: Hand Prop Jabiru 2200 ----- Original Message ----- From: "Gig Giacona" Sent: Wednesday, April 18, 2007 8:08 AM Subject: Zenith-List: Re: Hand Prop Jabiru 2200 > > > rickpitcher, you've had two messages I've noticed that were blank. The one > in this thread and the one in the thread about foam for fueal tanks. > > DO NOT ARCHIVE > Thanks Gig. I thought Matt had fixed that glitch. I reposted from the web instead of e-mail. Rick do not archive ________________________________ Message 10 ____________________________________ Time: 09:45:54 AM PST US Subject: Zenith-List: Re: Hand Prop Jabiru 2200 From: "Gig Giacona" That one was blank in the forum as well. DO NOT ARCHIVE -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=107748#107748 ________________________________ Message 11 ____________________________________ Time: 12:16:24 PM PST US From: Mark Sherman Subject: Zenith-List: LRI probes John How is the next batch of probes comming along. Mark S. do not archive #4 Message: #45608 From: "John Bolding" Subject: Re: Making an LRI probe Ron, My last message to the group got lost in space. When I announced,all the inventory evaporated in 3 hrs. I have another batch of 50 coming in a week or so. I'll keep your email and send out notices to those who got left behind the first time before I make the next announcement. thanks for your interest. John ----- Original Message ----- From: R.D.(Ron) Leclerc To: John Bolding Cc: R.D.(Ron) Leclerc Sent: Tuesday, March 27, 2007 9:33 PM Subject: xxx Re: xxx Re: Zenith-List: Re: Making an LRI probe __________________________________________________ ________________________________ Message 12 ____________________________________ Time: 12:47:50 PM PST US From: "John Bolding" Subject: Re: Zenith-List: LRI probes they arrived about 5 min ago, send ck for $30+$5 priority Shipping to J&N Bolding Ent.Inc 15731 Lakeview Dr. Baytown, TX 77520 ----- Original Message ----- From: Mark Sherman To: Zenith List Sent: Wednesday, April 18, 2007 2:14 PM Subject: Zenith-List: LRI probes John How is the next batch of probes comming along. Mark S. do not archive #4 Message: #45608 From: "John Bolding" Subject: Re: Making an LRI probe Date: Mar 28, 2007 Ron, My last message to the group got lost in space. When I announced,all the inventory evaporated in 3 hrs. I have another batch of 50 coming in a week or so. I'll keep your email and send out notices to those who got left behind the first time before I make the next announcement. thanks for your interest. John ----- Original Message ----- From: R.D.(Ron) Leclerc To: John Bolding Cc: R.D.(Ron) Leclerc Sent: Tuesday, March 27, 2007 9:33 PM Subject: xxx Re: xxx Re: Zenith-List: Re: Making an LRI probe __________________________________________________ ________________________________ Message 13 ____________________________________ Time: 01:07:07 PM PST US From: "n801bh@netzero.com" Subject: Re: Zenith-List: Re: Hand Prop Jabiru 2200 All of Ricks messages came though readable on my end...... do not archive Ben Haas N801BH www.haaspowerair.com -- "Gig Giacona" wrote: net> That one was blank in the forum as well. DO NOT ARCHIVE -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=107748#107748 ======================== =========== ======================== =========== ======================== ===========

All of Ricks messages came though readable on my end......

do not archive


Ben Haas
N801BH
www.haaspowerair .com

-- "Gig Giacona" <wr.giacona@suddenlink.ne t> wrote:
--> Zenith-List message posted&nb sp;by: "Gig Giacona" <wr.giacona@suddenlink.net>

That one was blank in the forum  as well.


DO NOT ARCHIVE

--------
W.R . &quot;Gig&quot; Giacona
601XL Under Con struction
See my progress at www.peoamerica.net/N 601WR




Read this topic online here :

http://forums.matronics.com/viewtopic.php?p=107748#107748
======================== =          - Th he Matronics List Features Navigator to br arch & Download, 7-Day Browse, Chat, F ========================               great content now also available via  ======================== ====================
________________________________ Message 14 ____________________________________ Time: 01:46:08 PM PST US Subject: Zenith-List: Re: Hand Prop Jabiru 2200 From: "Gig Giacona" It is a forum issue and he isn't alone in the problem. -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=107786#107786 ________________________________ Message 15 ____________________________________ Time: 08:16:45 PM PST US From: "tjlhl" Subject: Zenith-List: Items for sale Matt is it OK to put a for sale email on the Zenith list, of a 601XL main gear, and some 12 gal. wing tanks. Please let me know if this is OK or is there a wanted and for sale seperate list. Thank you, Tom Loftin ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.