---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Tue 10/14/08: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:32 AM - Re: AN sleeves (Geoff Heap) 2. 08:23 AM - Re: Zenair Newsletters mailed - surprise inside (Gig Giacona) 3. 08:50 AM - Re: Re: Zenair Newsletters mailed - surprise inside (Jon Croke) 4. 10:47 AM - Re: Cortec - 373 Primer (Jimbo) 5. 03:26 PM - Re: Re: AN sleeves/Ding (Bill Naumuk) 6. 04:12 PM - Re: Cortec - 373 Primer (JohnDRead@aol.com) 7. 06:30 PM - Re: Cortec - 373 Primer (Jugle) 8. 10:35 PM - 3 1/8 instrument housing (LHusky@aol.com) ________________________________ Message 1 _____________________________________ Time: 06:32:31 AM PST US Subject: Zenith-List: Re: AN sleeves From: "Geoff Heap" Bill. No one pointed out the fact that you can see the matching flare angle if you look in the large end I.D. .....Geoff Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8700#208700 ________________________________ Message 2 _____________________________________ Time: 08:23:09 AM PST US Subject: Zenith-List: Re: Zenair Newsletters mailed - surprise inside From: "Gig Giacona" Thanks for the bonus DVD. Really enjoyed both Gus's preflight info and the info on the new canopy. On the issue of the new canopy. That has got to be a sphincter tightening experience when you cut it in half. -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8723#208723 ________________________________ Message 3 _____________________________________ Time: 08:50:30 AM PST US From: "Jon Croke" Subject: Re: Zenith-List: Re: Zenair Newsletters mailed - surprise inside Yeah - and I was only watching! ----- Original Message ----- From: "Gig Giacona" Sent: Tuesday, October 14, 2008 10:22 AM Subject: Zenith-List: Re: Zenair Newsletters mailed - surprise inside > > Thanks for the bonus DVD. Really enjoyed both Gus's preflight info and the > info on the new canopy. > > On the issue of the new canopy. That has got to be a sphincter tightening > experience when you cut it in half. > > -------- > W.R. "Gig" Giacona > 601XL Under Construction > See my progress at www.peoamerica.net/N601WR > do not achive ________________________________ Message 4 _____________________________________ Time: 10:47:09 AM PST US From: Jimbo Subject: RE: Zenith-List: Cortec - 373 Primer Maybe its different there, but in the US, paint stores have "universal" tin ting colors that work for both water and solvent thinned paints. --- On Mon, 10/13/08, Greg Cox, Gas-n-Go Automotive Pty Ltd wrote: From: Greg Cox, Gas-n-Go Automotive Pty Ltd Subject: RE: Zenith-List: Cortec - 373 Primer Hi John, Thanks for the reply, do you know what they would use to tint the primer? Would it be an enamel or acrylic tint? - Regards, Greg Cox Sydney, Australia - From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of JohnDRead@aol. com Sent: Tuesday, 14 October 2008 2:05 PM Subject: Re: Zenith-List: Cortec - 373 Primer - Hi Greg; ------------Zenith will sell you a quart. Then take it to your local paint supplier and have t hem tint it to the color you want. FWIW I found that the material as supplied i s to thick to get a thin coat when brushing it onto parts. I thinned mine with denatured alchohol 3 to 1. I found this gave me the film thickness required . - John Read Phone: 303-648-3261 Fax: 303-648-3262 Cell: 719-494-4567 - In a message dated 10/13/2008 6:22:53 P.M. Mountain Daylight Time, greg@gas-n-go.com.au writes: Hi, Can anyone advise on where I can get Cortec ' 373 in Olive Green in quantities less than 5 gallons in the US or Australia. I would lik e to purchase a quart. - Regards, Greg Cox Sydney, Australia - -f="http://www.matronics.com/Navigator?Zenith-List">http://www.mat ronics.com/Navigator?Zenith-List.matronics.com/">http://forums.matronics.co m://www.matronics.com/contribution">http://www.matronics.com/contribution - New MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. Try it out! - -http://www.matronics.com/Navigator?Zenith-Listhttp://forums.matroni cs.comhttp://www.matronics.com/contribution - ________________________________ Message 5 _____________________________________ Time: 03:26:06 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: Re: AN sleeves/Ding All- I made an obvious faux pas to try and excuse my failure (Through my continuing stupidity) to finish my project before Lynn. Lynn's workmanship is damned near Lindy quality but a big factor is that his work schedule and dedication allowed him to finish in much less time than me. I've resigned myself to that. My previous e-mail remarks are regional, and you have to make allowances. Around here, "Asshole" is an honorific. I've been asked recently "When are you going to finish that thing?" The answer I long ago resigned myself to is, "When I'm satisfied". N601MG flies by '10. There. I made a commitment. Bill do not archive ----- Original Message ----- From: "Geoff Heap" Sent: Tuesday, October 14, 2008 9:31 AM Subject: Zenith-List: Re: AN sleeves > > Bill. > No one pointed out the fact that you can see the matching flare angle if > you look in the large end I.D. .....Geoff > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p 8700#208700 > > > ________________________________ Message 6 _____________________________________ Time: 04:12:19 PM PST US From: JohnDRead@aol.com Subject: Re: Zenith-List: Cortec - 373 Primer Hi Greg; Paint tint materials generally work in all types of paint. John Read Phone: 303-648-3261 Fax: 303-648-3262 Cell: 719-494-4567 In a message dated 10/14/2008 12:31:30 A.M. Mountain Daylight Time, greg@gas-n-go.com.au writes: Hi John, Thanks for the reply, do you know what they would use to tint the primer? Would it be an enamel or acrylic tint? Regards, Greg Cox Sydney, Australia From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of JohnDRead@aol. com Sent: Tuesday, 14 October 2008 2:05 PM Subject: Re: Zenith-List: Cortec - 373 Primer Hi Greg; Zenith will sell you a quart. Then take it to your local paint supplier and have them tint it to the color you want. FWIW I found that the material as supplied is to thick to get a thin coat when brushing it onto parts. I thin ned mine with denatured alchohol 3 to 1. I found this gave me the film thicknes s required. John Read Phone: 303-648-3261 Fax: 303-648-3262 Cell: 719-494-4567 In a message dated 10/13/2008 6:22:53 P.M. Mountain Daylight Time, greg@gas-n-go.com.au writes: Hi, Can anyone advise on where I can get Cortec =93 373 in Olive Green in quantities less than 5 gallons in the US or Australia. I would like to purc hase a quart. Regards, Greg Cox Sydney, Australia f="http://www.matronics.com/Navigator?Zenith-List">http://www.matronics.co m/Na vigator?Zenith-List .matronics.com/">http://forums.matronics.com ://www.matronics.com/contribution">http://www.matronics.com/contribution ____________________________________ New MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. _Try it out! _ (http://local.mapquest.com/?ncid=emlcntnew00000002) http://www.matronics.com/Navigator?Zenith-List http://forums.matronics.com http://www.matronics.com/contribution (http://www.matronics.com/Navigator?Zenith-List) (http://www.matronics.com/contribution) **************New MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. Try it out (http://local.mapquest.com/?ncid=emlcntnew00000003) ________________________________ Message 7 _____________________________________ Time: 06:30:24 PM PST US Subject: Zenith-List: Re: Cortec - 373 Primer From: "Jugle" Hi Greg, I bought a couple of spray cans of Tempo Zinc Oxide from Aeroparts here in Australia. The only problem was exorbitant freight for dangerous goods, but out here where I live it was cheaper than driving! Have a look at http://www.aeroparts.com.au Glenn. -------- Glenn Andressen 601XL- Rudder, Stabiliser partially completed, Wing ribs, nose ribs done, numerous other parts made. Read this topic online here: http://forums.matronics.com/viewtopic.php?p 8828#208828 ________________________________ Message 8 _____________________________________ Time: 10:35:55 PM PST US From: LHusky@aol.com Subject: Zenith-List: 3 1/8 instrument housing I need an unusable airspeed indicator, tachometer, or any other 3 1/8 instrument. IF you have just a face plate for a 3 1/8 instrument, that might work also. I do not care about clear glass or what the face looks like. It will be gutted anyway. If you have something, let me know. My son wants it for a high school project and he keeps eyeing my instruments for my panel. NOT!!! Larry Husky Madras, Oregon **************New MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. Try it out (http://local.mapquest.com/?ncid=emlcntnew00000002) ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.