---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Thu 10/23/08: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:50 AM - Re: Stupid Instrument Question (Paul Mulwitz) 2. 04:04 AM - Re: Stupid Instrument Question (Clive Richards) 3. 07:01 AM - Re: [Probable Spam] Stupid Instrument Question (LarryMcFarland) 4. 07:35 AM - Re: [Probable Spam] Stupid Instrument Question (LHusky@aol.com) 5. 07:37 AM - Re: Stupid Instrument Question (LHusky@aol.com) 6. 07:41 AM - Re: Stupid Instrument Question (LHusky@aol.com) 7. 11:39 AM - Gas Springs for sale, 40# (Dr. Andrew Elliott) 8. 02:02 PM - Copperstate Fly In (MHerder) ________________________________ Message 1 _____________________________________ Time: 02:50:51 AM PST US From: Paul Mulwitz Subject: Re: Zenith-List: Stupid Instrument Question HI Larry, I too am working on my panel. I feel your pain . . . I am not familiar with your kind of instrument, but I have an idea which might help. If you look carefully at the case around the pins in question you might find the "A" or other pin name embossed on the case. Good luck, Paul XL getting close At 11:33 PM 10/22/2008, you wrote: >OK, looking at the back of my Turn Coordinator, >there is a 3 pin connector. There are 2 pins on >top and 1 pin on the bottom. A is Positive, B >is Aircraft Ground and C is not used. Which pin >is A and B. I think A is the top right and B is >top left, but I want to be sure. Thanks for the help. > >Larry Husky >Madras, Oregon >Working on Panel............. > > >---------- >Play online games for FREE at Games.com! All of >your favorites, no registration required and >great graphics ' >http://www.games.com?ncid=emlcntusgame00000001>check it out! > ________________________________ Message 2 _____________________________________ Time: 04:04:09 AM PST US From: "Clive Richards" Subject: Re: Zenith-List: Stupid Instrument Question Hi Larry I think if you check with an ohmmeter you will find the ground pin B is connected to the case. I recall having to do this to Identify. do not archive Clive Rays G CBDG 260 Hrs & Waiting 701 kit ----- Original Message ----- From: Paul Mulwitz To: zenith-list@matronics.com Sent: Thursday, October 23, 2008 10:50 AM Subject: Re: Zenith-List: Stupid Instrument Question HI Larry, I too am working on my panel. I feel your pain . . . I am not familiar with your kind of instrument, but I have an idea which might help. If you look carefully at the case around the pins in question you might find the "A" or other pin name embossed on the case. Good luck, Paul XL getting close At 11:33 PM 10/22/2008, you wrote: OK, looking at the back of my Turn Coordinator, there is a 3 pin connector. There are 2 pins on top and 1 pin on the bottom. A is Positive, B is Aircraft Ground and C is not used. Which pin is A and B. I think A is the top right and B is top left, but I want to be sure. Thanks for the help. Larry Husky Madras, Oregon Working on Panel............. ------------------------------------------------------------------------- --- Play online games for FREE at Games.com! All of your favorites, no registration required and great graphics - check it out! ________________________________ Message 3 _____________________________________ Time: 07:01:54 AM PST US From: LarryMcFarland Subject: Re: [Probable Spam] Zenith-List: Stupid Instrument Question Larry, I noted the pins on my electrical drawing when it was time to get it right. See link http://www.macsmachine.com/images/electrical/full/primary-wiring.gif Larry McFarland 601HDS at www.macsmachine.com LHusky@aol.com wrote: > OK, looking at the back of my Turn Coordinator, there is a 3 pin > connector. There are 2 pins on top and 1 pin on the bottom. A is > Positive, B is Aircraft Ground and C is not used. Which pin is A and > B. I think A is the top right and B is top left, but I want to be > sure. Thanks for the help. > > Larry Husky > Madras, Oregon > Working on Panel............. > ________________________________ Message 4 _____________________________________ Time: 07:35:44 AM PST US From: LHusky@aol.com Subject: Re: [Probable Spam] Zenith-List: Stupid Instrument Question THANKS LARRY!! I forgot to check your site! Larry In a message dated 10/23/2008 7:03:24 A.M. Pacific Daylight Time, larry@macsmachine.com writes: --> Zenith-List message posted by: LarryMcFarland Larry, I noted the pins on my electrical drawing when it was time to get it right. See link http://www.macsmachine.com/images/electrical/full/primary-wiring.gif Larry McFarland 601HDS at www.macsmachine.com LHusky@aol.com wrote: > OK, looking at the back of my Turn Coordinator, there is a 3 pin > connector. There are 2 pins on top and 1 pin on the bottom. A is > Positive, B is Aircraft Ground and C is not used. Which pin is A and > B. I think A is the top right and B is top left, but I want to be > sure. Thanks for the help. > > Larry Husky > Madras, Oregon > Working on Panel............. > **************Play online games for FREE at Games.com! All of your favorites , no registration required and great graphics =93 check it out! http://www.games.com?ncid=emlcntusgame00000001) ________________________________ Message 5 _____________________________________ Time: 07:37:10 AM PST US From: LHusky@aol.com Subject: Re: Zenith-List: Stupid Instrument Question Good Idea. I will do that also. Larry In a message dated 10/23/2008 4:07:01 A.M. Pacific Daylight Time, s.clive.richards@homecall.co.uk writes: Hi Larry I think if you check with an ohmmeter you will find the ground pin B is connected to the case. I recall having to do this to Iden tify. do not archive Clive Rays G CBDG 260 Hrs & Waiting 701 kit ----- Original Message ----- From: _Paul Mulwitz_ (mailto:psm@att.net) Sent: Thursday, October 23, 2008 10:50 AM Subject: Re: Zenith-List: Stupid Instrument Question HI Larry, I too am working on my panel. I feel your pain . . . I am not familiar with your kind of instrument, but I have an idea which might help. If you look carefully at the case around the pins in question you might find the "A" or other pin name embossed on the case. Good luck, Paul XL getting close At 11:33 PM 10/22/2008, you wrote: OK, looking at the back of my Turn Coordinator, there is a 3 pin connector. There are 2 pins on top and 1 pin on the bottom. A is Positive, B is Aircraft Ground and C is not used. Which pin is A and B. I think A is th e top right and B is top left, but I want to be sure. Thanks for the help. Larry Husky Madras, Oregon Working on Panel............. ____________________________________ Play online games for FREE at Games.com! All of your favorites, no registration required and great graphics =93 _check it out!_ (http://pr.atwola.com/promooclk/100000075x1211202682x1200689022/aol?redir = http://www.games.com?ncid=emlcntusgame00000001) href="http://www.matronics.com/Navigator?Zenith-List">http://www.matronhre f="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c (http://www.matronics.com/Navigator?Zenith-List) (http://www.matronics.com/contribution) **************Play online games for FREE at Games.com! All of your favorites , no registration required and great graphics =93 check it out! http://www.games.com?ncid=emlcntusgame00000001) ________________________________ Message 6 _____________________________________ Time: 07:41:00 AM PST US From: LHusky@aol.com Subject: Re: Zenith-List: Stupid Instrument Question It is a Cessna Instrument and I can find no markings at all. Just a sticke r telling me what pins are positive and negative. Larry Husky Madras, ORegon In a message dated 10/23/2008 2:51:49 A.M. Pacific Daylight Time, psm@att.net writes: HI Larry, I too am working on my panel. I feel your pain . . . I am not familiar with your kind of instrument, but I have an idea which might help. If you look carefully at the case around the pins in question you might find the "A" or other pin name embossed on the case. Good luck, Paul XL getting close At 11:33 PM 10/22/2008, you wrote: OK, looking at the back of my Turn Coordinator, there is a 3 pin connector. There are 2 pins on top and 1 pin on the bottom. A is Positive, B is Aircraft Ground and C is not used. Which pin is A and B. I think A is the top right and B is top left, but I want to be sure. Thanks for the help. Larry Husky Madras, Oregon Working on Panel............. ____________________________________ Play online games for FREE at Games.com! All of your favorites, no registration required and great graphics =93 _check it out!_ (http://pr.atwola.com/promooclk/100000075x1211202682x1200689022/aol?redir = http://www.games.com?ncid=emlcntusgame00000001) (http://www.matronics.com/Navigator?Zenith-List) (http://www.matronics.com/contribution) **************Play online games for FREE at Games.com! All of your favorites , no registration required and great graphics =93 check it out! http://www.games.com?ncid=emlcntusgame00000001) ________________________________ Message 7 _____________________________________ Time: 11:39:42 AM PST US From: "Dr. Andrew Elliott" Subject: Zenith-List: Gas Springs for sale, 40# I have a pair of unused 40# gas springs I would like to sell. (I used 60# springs instead on my XL/TD.) These are $11.30 each from McMaster-Carr and are listed at $10.50 on the Zenith on-line catalog. My price is $11 for both, plus shipping via your choice method. If interested, please contact me off-list. Andy Elliott, Mesa, AZ N601GE (registered) 601XL/TD, Corvair, nearly done... ________________________________ Message 8 _____________________________________ Time: 02:02:42 PM PST US Subject: Zenith-List: Copperstate Fly In From: "MHerder" Hello folks, just curious to see if any Zenith folks were headed to Copperstate in Casa Grande AZ? If so I'll see you guys there. Would be interested in seeing anybody's completed projects! Safe flying! -------- One Rivet at a Time! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=210027#210027 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.