---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Tue 01/27/09: 27 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:48 AM - Re: Grove nosewheel tube and tire assembly (FlyGuyTililDie) 2. 07:49 AM - Battery cover answer...Giving back (Dan Wilde) 3. 08:04 AM - Re: Re: Grove nosewheel tube and tire assembly (Jay Maynard) 4. 08:43 AM - Re: Grove nosewheel tube and tire assembly (FlyGuyTililDie) 5. 08:43 AM - Re: CH601 XL Aileron Push Rods. (japhillipsga@aol.com) 6. 09:10 AM - Re: Re: CH601 XL Aileron Push Rods. (japhillipsga@aol.com) 7. 10:17 AM - Re: CH601 XL Aileron Push Rods. (japhillipsga@aol.com) 8. 10:34 AM - CH601 XL Aileron Push Rods. (Beckman, Rick) 9. 01:00 PM - Re: CH601 XL Aileron Push Rods. (Joe) 10. 01:35 PM - Re: CH601 XL Aileron Push Rods. (Gig Giacona) 11. 02:42 PM - Re: CH601 XL Aileron Push Rods. (Bill Pagan) 12. 03:17 PM - Re: Re: CH601 XL Aileron Push Rods. (Craig Payne) 13. 03:19 PM - Re: Re: CH601 XL Aileron Push Rods. (Davcoberly@wmconnect.com) 14. 03:40 PM - Re: Re: CH601 XL Aileron Push Rods. (Bill Pagan) 15. 03:56 PM - Re: Re: CH601 XL Aileron Push Rods. (JAPhillipsGA@aol.com) 16. 04:05 PM - Re: CH601 XL Aileron Push Rods. (leinad) 17. 04:13 PM - Re: Fuel sight gage (Bill Naumuk) 18. 04:15 PM - Re: Grove nosewheel tube and tire assembly (leinad) 19. 04:22 PM - Re: Fuel sight gage (Bill Naumuk) 20. 06:18 PM - Re: Re: CH601 XL Aileron Push Rods. (Robert Taylor) 21. 06:53 PM - Re: Grove nosewheel tube and tire assembly (FlyGuyTililDie) 22. 07:08 PM - Re: CH601 XL Aileron Push Rods. (mcjon77) 23. 07:34 PM - Re: Re: Grove nosewheel tube and tire assembly (Afterfxllc@aol.com) 24. 07:43 PM - Re: Re: CH601 XL Aileron Push Rods. (Afterfxllc@aol.com) 25. 09:05 PM - Re: Re: CH601 XL Aileron Push Rods. (JAPhillipsGA@aol.com) 26. 09:07 PM - Re: Re: CH601 XL Aileron Push Rods. (JAPhillipsGA@aol.com) 27. 09:15 PM - Re: Re: CH601 XL Aileron Push Rods. (JAPhillipsGA@aol.com) ________________________________ Message 1 _____________________________________ Time: 07:48:17 AM PST US Subject: Zenith-List: Re: Grove nosewheel tube and tire assembly From: "FlyGuyTililDie" Does it look like this? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227084#227084 Attachments: http://forums.matronics.com//files/500x5longpercent20closeup_641.jpg ________________________________ Message 2 _____________________________________ Time: 07:49:40 AM PST US From: Dan Wilde Subject: Zenith-List: Battery cover answer...Giving back I installed a sealed battery in my 701. I also installed the battery box but it has no drain and the DAR was ok with that when I told him it was a sealed battery. I did put the cover on the box just to protect the battery leads from foreigners. DW ________________________________ Message 3 _____________________________________ Time: 08:04:19 AM PST US From: Jay Maynard Subject: Re: Zenith-List: Re: Grove nosewheel tube and tire assembly On Tue, Jan 27, 2009 at 07:44:18AM -0800, FlyGuyTililDie wrote: > Does it look like this? > http://forums.matronics.com//files/500x5longpercent20closeup_641.jpg Yup, that's it. -- Jay Maynard, K5ZC, PP-ASEL, AGI http://www.conmicro.com http://jmaynard.livejournal.com http://www.tronguy.net Fairmont, MN (KFRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC http://www.tronguy.net/N55ZC.shtml ________________________________ Message 4 _____________________________________ Time: 08:43:35 AM PST US Subject: Zenith-List: Re: Grove nosewheel tube and tire assembly From: "FlyGuyTililDie" These are the same as motorcycle/ATV tubes. Check the tube to make sure that the small nut and rubber washer are tightened down to the base of the valve stem against the tube itself--these go inside the wheel. The other nut goes on the outside of the rim to prevent the stem from pulling inside the rim during installation. hope this helps Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227105#227105 ________________________________ Message 5 _____________________________________ Time: 08:43:39 AM PST US Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. From: japhillipsga@aol.com I hope this gets to you ok, Thanks, Bill -----Original Message----- From: ZodieRocket Sent: Thu, 22 Jan 2009 6:52 pm Subject: RE: Zenith-List: CH601 XL Aileron Push Rods. Bill send it to me for ch601.com ? Mark Townsend? Alma, Ontario Zodiac?CH650 C-GOXL, CH701 Rotax 912, STOL CH750 Just started www.ch601.org / www.ch701.com/ www.Osprey2.com -----Original Message----- From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of japhillipsga@aol.com Sent: Thursday, January 22, 2009 3:16 PM Subject: Zenith-List: CH601 XL Aileron Push Rods. ? Hello Fellow 601 Builders and Flyers, I have finished the picture/text description of converting my XL to push/pull rods. How can I post it so those that care to see it may? Its about 5 pages long with photos and text. Bill of Georgia Email message sent from CompuServe - visit us today at http://www.cs.com ? ? ? ? Which stars will make the biggest headlines in 2009? Get Hollywood news, celebrity photos and more with the PopEater Toolbar. ? ? ????????? - The Zenith-List Email Forum - ?? --> http://www.matronics.com/Navigator?Zenith-List ?? --> http://www.matronics.com/Navigator?Zenith-List ?????????????? - MATRONICS WEB FORUMS - ?????????????? - MATRONICS WEB FORUMS - ?? --> http://forums.matronics.com ?? --> http://forums.matronics.com ???????????? - List Contribution Web Site - ???????????? - List Contribution Web Site - ? Thank you for your generous support! ????????????????????????????? -Matt Dralle, List Admin. ?? --> http://www.matronics.com/contribution ? ________________________________ Message 6 _____________________________________ Time: 09:10:23 AM PST US Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. From: japhillipsga@aol.com Gig, hope this get to you ? Thanks, Bill -----Original Message----- From: Gig Giacona Sent: Thu, 22 Jan 2009 5:10 pm Subject: Zenith-List: Re: CH601 XL Aileron Push Rods. Bill, If you email it to me I will be happy to put it all in a pdf for you. -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226236#226236 ________________________________ Message 7 _____________________________________ Time: 10:17:53 AM PST US Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. From: japhillipsga@aol.com I hope I'm doing this correct. Best regards, Bill -----Original Message----- From: Trevor Jennings Sent: Thu, 22 Jan 2009 4:09 pm Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. You can save it as a PDF and post it as an attachment perhaps. - Trevor On Thu, Jan 22, 2009 at 3:15 PM, wrote: > > > Hello Fellow 601 Builders and Flyers, I have finished the picture/text > description of converting my XL to push/pull rods. > > How can I post it so those that care to see it may? Its about 5 pages long > with photos and text. Bill of Georgia > > ________________________________ > Email message sent from CompuServe - visit us today at http://www.cs.com > > > ________________________________ > Which stars will make the biggest headlines in 2009? Get Hollywood news, > celebrity photos and more with the PopEater Toolbar. > > ________________________________ Message 8 _____________________________________ Time: 10:34:28 AM PST US Subject: Zenith-List: CH601 XL Aileron Push Rods. From: "Beckman, Rick" Bill, I just want to say "Thanks!" for the push rod pictures! Rick of Buckner Do NOT archive ________________________________ Message 9 _____________________________________ Time: 01:00:45 PM PST US From: "Joe" Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. can someone please send me drawings and or pictures if not e mail please fax to 7048270937 thanks joe ham 601xl 0235 ----- Original Message ----- From: JAPhillipsGA@aol.com To: zenith-list@matronics.com Sent: Friday, January 23, 2009 11:30 PM Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. Mark, I left the thing on my computer at work and I won't be back in the office until Tuesday. I'll try to send it to you then. Thanks, Bill ------------------------------------------------------------------------- ----- From Wall Street to Main Street and everywhere in between, stay up-to-date with the latest news. ________________________________ Message 10 ____________________________________ Time: 01:35:49 PM PST US Subject: Zenith-List: Re: CH601 XL Aileron Push Rods. From: "Gig Giacona" First and foremost. Thank you Bill. You have really added a heck of a nice piece of data to the 601 community with this. Second. Just so I can add a little something I've converted it to a pdf file for those that don't have Word and that is attached. Finally Joe Ham. Check your e-mail a copy should be there shortly. -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227190#227190 Attachments: http://forums.matronics.com//files/rods_793.pdf ________________________________ Message 11 ____________________________________ Time: 02:42:14 PM PST US From: Bill Pagan Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. Maybe I missed it but were the pics posted someplace of the aileron pushrod setup? Bill Pagan EAA Tech Counselor #4395 601XL QBK/Corvair/N565BW (RES) --- On Tue, 1/27/09, Joe wrote: From: Joe Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. can someone please send me drawings and or pictures if not e mail please fax to 7048270937 thanks joe ham- 601xl 0235 - ----- Original Message ----- From: JAPhillipsGA@aol.com Sent: Friday, January 23, 2009 11:30 PM Subject: Re: Zenith-List: CH601 XL Aileron Push Rods. Mark, I left the thing on my computer at work and I won't be back in the of fice until Tuesday. I'll try to send it to you then. Thanks, Bill >From Wall Street to Main Street and everywhere in between, stay up-to-date with the latest news. href="http://www.matronics.com/Navigator?Zenith-List">http://www.matronhr ef="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c =0A=0A=0A ________________________________ Message 12 ____________________________________ Time: 03:17:16 PM PST US From: "Craig Payne" Subject: RE: Zenith-List: Re: CH601 XL Aileron Push Rods. Thanks Gig. You should post the PDF to the file/photo sharing area. Links to attachments aren't valid after a number of days. -- Craig -----Original Message----- From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Gig Giacona Sent: Tuesday, January 27, 2009 2:24 PM Subject: Zenith-List: Re: CH601 XL Aileron Push Rods. First and foremost. Thank you Bill. You have really added a heck of a nice piece of data to the 601 community with this. Second. Just so I can add a little something I've converted it to a pdf file for those that don't have Word and that is attached. Finally Joe Ham. Check your e-mail a copy should be there shortly. -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227190#227190 Attachments: http://forums.matronics.com//files/rods_793.pdf ________________________________ Message 13 ____________________________________ Time: 03:19:23 PM PST US From: Davcoberly@wmconnect.com Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. Send me a copy for the Aileron Push Rods I haven't seen it yet! David Coberly 601XL / Corvair ________________________________ Message 14 ____________________________________ Time: 03:40:32 PM PST US From: Bill Pagan Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. Thanks Gig for posting this and thanks Bill for creating it.- It is a gre at-conversion to consider. Bill Pagan EAA Tech Counselor #4395 601XL QBK/Corvair/N565BW (RES) --- On Tue, 1/27/09, Gig Giacona wrote: From: Gig Giacona Subject: Zenith-List: Re: CH601 XL Aileron Push Rods. First and foremost. Thank you Bill. You have really added a heck of a nice piece of data to the 601 community with this. Second. Just so I can add a little something I've converted it to a pdf fil e for those that don't have Word and that is attached. Finally Joe Ham. Check your e-mail a copy should be there shortly. -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227190#227190 Attachments: http://forums.matronics.com//files/rods_793.pdf le, List Admin. =0A=0A=0A ________________________________ Message 15 ____________________________________ Time: 03:56:36 PM PST US From: JAPhillipsGA@aol.com Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. Dave and Fellow 601 Builders & Flyers, I've sent and posted the Aileron Control Rod conversion saga about half a dozen places so far, but I don't really know where it'll end up for viewing and down load. Hopefully somebody who knows just the right localtion to place it for easy viewing will grab it up. When you see it and if your not too pissed off at me and you have any questions write me and I'll be happy to help. Best regards, Bill of Georgia **************From Wall Street to Main Street and everywhere in between, stay up-to-date with the latest news. (http://aol.com?ncid=emlcntaolcom00000023) ________________________________ Message 16 ____________________________________ Time: 04:05:24 PM PST US Subject: Zenith-List: Re: CH601 XL Aileron Push Rods. From: "leinad" Nicely done Bill! Dan Dempsey, working on wings do not archive -------- Scratch building XL with Corvair Engine Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227231#227231 ________________________________ Message 17 ____________________________________ Time: 04:13:55 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: Fuel sight gage Craig- I'll look into it. Thankfully I'm not past the point of no return, but I'm still tap dancing. Bill do not archive ----- Original Message ----- From: Craig Payne To: zenith-list@matronics.com Sent: Monday, January 26, 2009 8:51 PM Subject: RE: Zenith-List: Fuel sight gage I know of two vendors of optical fuel presence sensors. They won't monitor the level throughout the tank, just tell you when it passes a point. The first (Pillar Point Avionics) appears to have gone out of business as of the end of 2008. That leaves Aircraft Extras: http://www.aircraftextras.com/ They appear to only sell a complete system for detecting *low* fuel levels. But there is no reason why the sensors couldn't be used to detect a high level. See if they will sell just the sensor. -- Craig From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Bill Naumuk Sent: Monday, January 26, 2009 6:24 PM To: zenith list Subject: Zenith-List: Fuel sight gage All- Thanks much for your input. Unfortunately, I don't have room left in my panel to accommodate a sight gage. I can barely start nuts using 14" pliers considering everything I have to work around. So, here's my plan B question. What sender would you put in? I'm not worried about the wing tanks, just being able to monitor the header during wing tank fuel transfers. A sender with a "Full tank" alarm would be the most useful. Bill Naumuk Townville, Pa. HDS 601MG/Corvair 95% http://www.matronics.com/Navigator?Zenith-Listhttp://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 18 ____________________________________ Time: 04:15:24 PM PST US Subject: Zenith-List: Re: Grove nosewheel tube and tire assembly From: "leinad" FlyGuy, Jay and I were talking about this at monday night chat and I have yet to do this assembly myself. I still don't understand where the nuts go and what gets clamped. There are threads on the stem near the cap and near the tube seperated by a smaller diamter smooth part of the stem. There isn't enough thread on the part near the tube for both nuts on my inner tubes or Jay's. It doesn't look like there are enough on the picture that you posted. Does the one nut stay near the cap, as in your picture? Dan FlyGuyTililDie wrote: > These are the same as motorcycle/ATV tubes. Check the tube to make sure that the small nut and rubber washer are tightened down to the base of the valve stem against the tube itself--these go inside the wheel. The other nut goes on the outside of the rim to prevent the stem from pulling inside the rim during installation. > > hope this helps -------- Scratch building XL with Corvair Engine Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227234#227234 ________________________________ Message 19 ____________________________________ Time: 04:22:52 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: Fuel sight gage Herb- I'll have to root through their web page when I have time. Thanks for the lead. Bill do not archive ----- Original Message ----- From: Herb Heaton To: zenith-list@matronics.com Sent: Monday, January 26, 2009 8:57 PM Subject: Re: Zenith-List: Fuel sight gage Bill, I just purchased a capacitance fuel sender from Skysports. http://airstuff.com/eshop/10Browse.asp A/S carries them also but not all of the options. High and low switches are available. Herb ----- Original Message ----- From: Bill Naumuk To: zenith list Sent: Monday, January 26, 2009 6:24 PM Subject: Zenith-List: Fuel sight gage All- Thanks much for your input. Unfortunately, I don't have room left in my panel to accommodate a sight gage. I can barely start nuts using 14" pliers considering everything I have to work around. So, here's my plan B question. What sender would you put in? I'm not worried about the wing tanks, just being able to monitor the header during wing tank fuel transfers. A sender with a "Full tank" alarm would be the most useful. Bill Naumuk Townville, Pa. HDS 601MG/Corvair 95% href="http://www.matronics.com/Navigator?Zenith-List">http://www.matron href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ________________________________ Message 20 ____________________________________ Time: 06:18:40 PM PST US From: Robert Taylor Subject: RE: Zenith-List: Re: CH601 XL Aileron Push Rods. Looks likea great mod. A query on the tube size for the push rods Bill. Tub e size 1.1/8 inch OD .49 wall thickness=2Cis that .49 of an inch? Rob Taylor. xl.paint and interior to go.> Subject: Zenith-List: Re: CH601 XL Aileron Pu sh Rods.> From: wrgiacona@gmail.com> Date: Tue=2C 27 Jan 2009 13:24:22 -080 Giacona" > > First and foremost. Thank you Bill. You have really added a heck of a nice piece of data to the 601 community with this.> > Second. Just so I can add a little something I've converted it to a pdf file for those that don't have Word and that is attached.> > Finally Joe Ham. Check your e-mail a copy should be there shortly.> > --------> W.R . "=3BGig"=3B Giacona> 601XL Under Construction> See my progress at www.peoamerica.net/N601WR> > > > > Read this topic online here:> > http:// forums.matronics.com/viewtopic.php?p=227190#227190> > > > > Attachments: =========> > > _________________________________________________________________ Want to marry your mail? Combine your email accounts here! http://livelife.ninemsn.com.au/article.aspx?id=669758 ________________________________ Message 21 ____________________________________ Time: 06:53:15 PM PST US Subject: Zenith-List: Re: Grove nosewheel tube and tire assembly From: "FlyGuyTililDie" The outside nut (closest to the valve stem cap) just tightens down to the outside of the rim; I'm not sure if there is a recommended torque for this. The other nut just gets tightened to the base of the tube. To be honest I'm not sure if that base nut is necessary for this type of application but I'll leave that up to you. The attached photo shows it being installed without the base nut and rubber washer. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227269#227269 Attachments: http://forums.matronics.com//files/tube_install_995.jpg ________________________________ Message 22 ____________________________________ Time: 07:08:42 PM PST US Subject: Zenith-List: Re: CH601 XL Aileron Push Rods. From: "mcjon77" I'm not a Zodiac builder, but I just had to comment that this is the kind of innovation and information sharing that has drawn me to the homebuilding community. :D Bill, you should SERIOUSLY consider submitting your article to either the new "Experimenter" e-magazine from the EAA or "Sport Aviation". We really need more articles from people showing their innovative solutions and modifications to their homebuilt aircraft. I'm sure your article can be valuable to others, beyond those reading this list. Thanks for the great work. -------- Jon McDonald Building Sonex #1287 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227272#227272 ________________________________ Message 23 ____________________________________ Time: 07:34:17 PM PST US From: Afterfxllc@aol.com Subject: Re: Zenith-List: Re: Grove nosewheel tube and tire assembly >From what I remember you only use 1 nut and it is the one where the stem meets the tube. Some rims use the second one to hold the stem from going back in the wheel but ours don't. If you can't find an answer I will pull my front wheel and check for sure. Jeff In a message dated 1/27/2009 7:17:14 P.M. Eastern Standard Time, leinad@hughes.net writes: --> Zenith-List message posted by: "leinad" FlyGuy, Jay and I were talking about this at monday night chat and I have yet to do this assembly myself. I still don't understand where the nuts go and what gets clamped. There are threads on the stem near the cap and near the tube seperated by a smaller diamter smooth part of the stem. There isn't enough thread on the part near the tube for both nuts on my inner tubes or Jay's. It doesn't look like there are enough on the picture that you posted. Does the one nut stay near the cap, as in your picture? Dan FlyGuyTililDie wrote: > These are the same as motorcycle/ATV tubes. Check the tube to make sure that the small nut and rubber washer are tightened down to the base of the valve stem against the tube itself--these go inside the wheel. The other nut goes on the outside of the rim to prevent the stem from pulling inside the rim during installation. > > hope this helps -------- Scratch building XL with Corvair Engine Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227234#227234 **************A Good Credit Score is 700 or Above. See yours in just 2 easy steps! cemailfooterNO62) ________________________________ Message 24 ____________________________________ Time: 07:43:26 PM PST US From: Afterfxllc@aol.com Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. I'm curious as to why you used 049 wall and not the same as van's uses? I saw where you took material off the tube end? Do you know what thickness that ended up? I would think a thinner tube and not taking any material off the tube end would not weaken the end that you are exerting force to would be better. I am going to do this mod on the 601 I'm building and already have some tube ends left over from a rv3 I built. Jeff In a message dated 1/27/2009 9:21:39 P.M. Eastern Standard Time, rwtaylorjar@HOTMAIL.COM writes: Looks likea great mod. A query on the tube size for the push rods Bill. Tube size 1.1/8 inch OD .49 wall thickness,is that .49 of an inch? **************A Good Credit Score is 700 or Above. See yours in just 2 easy steps! cemailfooterNO62) ________________________________ Message 25 ____________________________________ Time: 09:05:19 PM PST US From: JAPhillipsGA@aol.com Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. Jeff, I would have preferred to use the exact size tube I used in the building of my RV-8a, but there was some logistical problems. The RV-8 uses a 1 1/8 tube at with .35 walls making the threaded insert plug too thick without machining for the thicker wall tube I purchased at Spruce. Also I needed about 94 inches of tube and finding T6 that long this side of the Mississippi was difficult and Van's did not sell it that long so I compromised and used tube with .014 thicker walls meaning I had to remove that much material from the threaded plugs I purchased from Van's. Also as the rods for the XL are almost 20 inches longer than the RV rods and aileron forces are greater with the XL's unbalanced aileron the thicker walled rod is desirable. I'm not an engineer so I am unable to refine the necessary difference so like most men I over build. Hope this answers your query and best regards, Bill **************From Wall Street to Main Street and everywhere in between, stay up-to-date with the latest news. (http://aol.com?ncid=emlcntaolcom00000023) ________________________________ Message 26 ____________________________________ Time: 09:07:39 PM PST US From: JAPhillipsGA@aol.com Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. Jon, thanks for your comment. I figure I have exposed myself enough now they'll probably throw me out of the witness protection program as it is. Hope the article helps you and good luck, Bill **************From Wall Street to Main Street and everywhere in between, stay up-to-date with the latest news. (http://aol.com?ncid=emlcntaolcom00000023) ________________________________ Message 27 ____________________________________ Time: 09:15:20 PM PST US From: JAPhillipsGA@aol.com Subject: Re: Zenith-List: Re: CH601 XL Aileron Push Rods. Dan, thanks for your thoughtfulness. I appreciate your comment. Best regards, Bill **************From Wall Street to Main Street and everywhere in between, stay up-to-date with the latest news. (http://aol.com?ncid=emlcntaolcom00000023) ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.