Today's Message Index:
----------------------
1. 09:02 AM - Re: Tach hookup for Stratus/Subaru (Tim Shankland)
2. 04:45 PM - For Sale.... (Tommy Walker)
3. 04:51 PM - FLY-IN (Tommy Walker)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Tach hookup for Stratus/Subaru |
Bill,
I used a standard VDO tach on my Stratus engine. The tach lead goes to
the ground side of the ignition coil. I did have some problems with an
unstable reading at around 3000 RPMs. I tracked it down to a short (2
msec) pulse that sometimes came from the system. I used the attached
circuit to tame the problem. Been flying over a year with a steady
reading tach.
Tim Shankland
Bill Steer wrote:
>
> Hello all. I recall somebody posting a note here some time ago about
> how they hooked up their tach for the standard FWF kit from Zenith.
> Larry has kindly sent me the drawing of his system, but he's using the
> TP-45 modules and I'm not (yet). If anybody has used the standard
> tach and the unmodified engine ignition from Stratus, can you please
> let me know where your tach signal leads are connected? Also, did you
> make your connections using the hand-written sketch Zenith supplies in
> their FWF documentation?
>
> Thanks very much.
>
> Bill
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
601 builders.
I have a CZEC built 601XL Rotax 921ULS motor mount that is for sale. It includes
everything except a couple of the bolts used for mounting.
If you are interested, I will sell it for $100.00 US, plus crating and shipping.
The mount was removed from a 2003 XL. I also have a couple of other parts
that would fit a Rotax 601XL.
Contact me at twalker(at) cableone.net
Tommy Walker in Alabama
--------
Tommy Walker
N8701 - Anniston, AL
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=244061#244061
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Builders,
Weather permitting, we are hosting a fly-in at our country airport on Saturday
May 16 (at) 9:00 AM.
If you are nearby, give us a look and we will give you a hotdog, burger, or BBQ
sandwich.
See attached description....
Tommy Walker in Alabama
Do Not Archive
--------
Tommy Walker
N8701 - Anniston, AL
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=244065#244065
Attachments:
http://forums.matronics.com//files/mcminn_flyin_25a_745.jpg
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|