---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Mon 05/18/09: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:07 AM - Chat Room Reminder (George Race) 2. 05:12 AM - Re: CANOPY SEALING? (Tim Shankland) 3. 06:12 AM - Operational description of tools used in aircraft building (601corvair) 4. 09:26 AM - Re: CANOPY SEALING? (Bryan Martin) 5. 03:24 PM - Re: CANOPY SEALING? (Juan Vega) 6. 03:24 PM - Re: CANOPY SEALING? (Juan Vega) 7. 07:45 PM - Re: CANOPY SEALING? (GLJSOJ1) 8. 09:07 PM - slip-skid indicator (Wes or Lurlene Bressler) ________________________________ Message 1 _____________________________________ Time: 05:07:08 AM PST US From: "George Race" Subject: Zenith-List: Chat Room Reminder Live Chat Room every Monday evening around 8:00 EDT www.mykitairplane.com Click on the Chat Room link on the page. George "Check Out My New Access Opening Kit" Do Not Archive ________________________________ Message 2 _____________________________________ Time: 05:12:00 AM PST US From: Tim Shankland Subject: Re: Zenith-List: CANOPY SEALING? Check out McMaster-Carr, http://www.mcmaster.com. They have an large assortment of seals. I used the Rubber Bulb seal and they can be bought adhesive backed. Tim N706TS 601HD Over 1 year in the air GLJSOJ1 wrote: > >My 601XL is getting ready for inspection nest weekend and I can't find or figure out how to seal the canopy at the side rails. My problem is that I have a 3/4 inch gap there. I have looked at weatherstripping, garage door seal, ACS catalog, auto shops, door seals. Unless someone has a better idea I plan to get s 3/4 to 1 inch thick sheet of closed cell-foam and cut strips to glue to the bottom of each rail. The thickest door seal I have found is 1/2 inch. > >Thanks > >-------- >601XL N676L reserved >ALMOST DONE >CHESAPEAKE VA > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=244450#244450 > > > > ________________________________ Message 3 _____________________________________ Time: 06:12:16 AM PST US From: 601corvair Subject: Zenith-List: Operational description of tools used in aircraft building Attached is an operational description of tools frequently used in aircraft - building Gentlemen,- Equip your shop with this minimum tool inventory.=0A-=0ADRI LL-PRESS: A tall upright machine useful for suddenly snatching flat - metal bar stock out of your hands so that it smacks you in the chest an d - , denting the freshly-painted project which - you had carefully set in the corner where nothing could get to - it. WIRE WHEEL: Cleans paint off bolts and then throws them - somewhere under the workbench with the speed of light. Also removes - fingerprints and hard-earned calluses from fingers in about the time it - takes you to say, 'Oh nuts' ELECTRIC HAND-DRILL: Normally used for spinning pop rivets in their holes until-you die of old age. SKILL SAW: A portable cutting tool used-to make studs too short. PLIERS: Used to round off bolt-heads. Sometimes used in the creation of b lood-blisters. BELT-SANDER: An electric sanding tool commonly used to=0A convert - minor touch-up jobs into major refinishing - jobs. HACKSAW: One of a family of cutting tools built on - the Ouija board principle. It transforms human energy into a crooked, -unpredictable motion, and the more you attempt to influence its course, the-more dismal your future becomes. VISE-GRIPS: Generally-used after pliers to completely round off boltheads . If nothing else is- available, they can also be used to transfer intens e welding heat to the - palm of your hand. TABLE SAW: A large stationary power tool - commonly used to launch wood projectiles for testing wall - integrity. BAND SAW: A large stationary power saw primarily - used by most shops to cut good aluminum sheet into smaller pieces that - more easily fit into the trash can after you cut on the inside of the l ine - instead of the outside=0A edge. PHILLIPS SCREWDRIVER: Normally - used to stab the vacuum seals under lids or for opening old-style - paper-and-tin oil cans and splashing oil on your shirt; but can also be used, - as the name implies, to strip out Phillips screw heads. STRAIGHT-SCREWDRIVER: A tool for opening paint cans. Sometimes used to - convert common slotted screws into non-removable screws and butchering - your palms. HAMMER: Originally employed as a weapon of war, - the hammer nowadays is used as a kind of divining rod to locate the mos t - expensive parts adjacent the object we are trying to hit. UTILITY-KNIFE: Used to open and slice through the contents of cardboard - cartons delivered to your front door; works particularly well on conten ts such - as seats, vinyl records, liquids in plastic bottles, collector magazine s, - refund checks, and=0A rubber or plastic parts. Especially useful for sl icing work - clothes, but only while in use. - - --- ----- =0A=0A=0A ________________________________ Message 4 _____________________________________ Time: 09:26:21 AM PST US From: Bryan Martin Subject: Re: Zenith-List: CANOPY SEALING? Here's the stuff I used: http://www.mcmaster.com/#8121a11/=1xen2e I found it either at Home Depot or Lowes, I haven't seen it at either lately. I cut off the one inch angle and taped the rest to the inside of the canopy side frame with the 3/8th inch angle on the bottom facing inboard. I installed it while sitting inside the cabin with the canopy fully latched with the 3/8th inch angle just slightly pressing against the longeron doubler. This way, it doesn't interfere with the canopy closing even in the coldest weather and it seals the gap very well. I originally had it extending from the instrument panel to the rear end of the rail, but the section aft of the latch kept snagging on the seat cushion and finally peeled off. So now it only extends aft to the latch and I have a short piece of foam weatherstrip stuck to the longeron doubler to seal the gap aft of the latch. > > > > > Check out McMaster-Carr, http://www.mcmaster.com. They have an large > assortment of seals. I used the Rubber Bulb seal and they can be > bought adhesive backed. > >> >> My 601XL is getting ready for inspection nest weekend and I can't >> find or figure out how to seal the canopy at the side rails. My >> problem is -- Bryan Martin N61BM, CH 601 XL, RAM Subaru, Stratus redrive. ________________________________ Message 5 _____________________________________ Time: 03:24:02 PM PST US From: Juan Vega Subject: Re: Zenith-List: CANOPY SEALING? DOes not sound right with 3/4 inch gap. You need to redo that and make it tighter. Maybe 1/4, but 3/4"? Juan -----Original Message----- >From: GLJSOJ1 >Sent: May 17, 2009 9:45 PM >To: zenith-list@matronics.com >Subject: Zenith-List: CANOPY SEALING? > > >My 601XL is getting ready for inspection nest weekend and I can't find or figure out how to seal the canopy at the side rails. My problem is that I have a 3/4 inch gap there. I have looked at weatherstripping, garage door seal, ACS catalog, auto shops, door seals. Unless someone has a better idea I plan to get s 3/4 to 1 inch thick sheet of closed cell-foam and cut strips to glue to the bottom of each rail. The thickest door seal I have found is 1/2 inch. > >Thanks > >-------- >601XL N676L reserved >ALMOST DONE >CHESAPEAKE VA > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=244450#244450 > > ________________________________ Message 6 _____________________________________ Time: 03:24:02 PM PST US From: Juan Vega Subject: Re: Zenith-List: CANOPY SEALING? DOes not sound right with 3/4 inch gap. You need to redo that and make it tighter. Maybe 1/4, but 3/4"? Juan -----Original Message----- >From: GLJSOJ1 >Sent: May 17, 2009 9:45 PM >To: zenith-list@matronics.com >Subject: Zenith-List: CANOPY SEALING? > > >My 601XL is getting ready for inspection nest weekend and I can't find or figure out how to seal the canopy at the side rails. My problem is that I have a 3/4 inch gap there. I have looked at weatherstripping, garage door seal, ACS catalog, auto shops, door seals. Unless someone has a better idea I plan to get s 3/4 to 1 inch thick sheet of closed cell-foam and cut strips to glue to the bottom of each rail. The thickest door seal I have found is 1/2 inch. > >Thanks > >-------- >601XL N676L reserved >ALMOST DONE >CHESAPEAKE VA > > >Read this topic online here: > >http://forums.matronics.com/viewtopic.php?p=244450#244450 > > ________________________________ Message 7 _____________________________________ Time: 07:45:22 PM PST US Subject: Zenith-List: Re: CANOPY SEALING? From: "GLJSOJ1" Thanks everyone. I have more ideas to work with now. As far as the gap being too wide, I think it a bit wide, but it is constant front to back, so to make it loser I guess I'd have to redo the front hinge first, but the rear rest on the latches so don't think I can lower that. I will go with the foam first, then seek out the garage door seals to get a better looking and better fit. Thanks again. -------- 601XL N676L reserved ALMOST DONE CHESAPEAKE VA Read this topic online here: http://forums.matronics.com/viewtopic.php?p=244584#244584 ________________________________ Message 8 _____________________________________ Time: 09:07:12 PM PST US From: "Wes or Lurlene Bressler" Subject: Zenith-List: slip-skid indicator Does anyone know if a peel-and-stick slip-skid indicator is on the market? Saw one once but can't remember where. Wes & Lurlene Bressler; 601XL with Jabiru 3300; 90% done - 10% to go Do not archive ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.