Today's Message Index:
----------------------
1. 07:42 AM - HD(S) web sites (Carlos Sa)
2. 08:58 AM - Re: HD(S) web sites (KEVINBONDS@comcast.net)
3. 09:19 AM - Re: HD(S) web sites (Terry Phillips)
4. 09:21 AM - Re: HD(S) web sites (Bill Naumuk)
5. 09:35 AM - Re: HD(S) web sites (Jim Belcher)
6. 10:26 AM - Re: HD(S) web sites (Carlos Sa)
7. 11:02 AM - Re: HD(S) web sites (Mitch Hodges)
8. 11:48 AM - Re: HD(S) web sites (Peter Chapman)
9. 03:10 PM - NACA Scoops (Bill Naumuk)
10. 03:20 PM - Re: NACA Scoops (Carlos Sa)
11. 03:44 PM - Re: NACA Scoops (Bill Naumuk)
12. 03:51 PM - Re: NACA Scoops (jaybannist@cs.com)
13. 04:13 PM - Re: NACA Scoops (Leo Gates)
14. 04:21 PM - Re: NACA Scoops (Bill Naumuk)
15. 04:22 PM - Re: NACA Scoops (Matt Dralle)
16. 04:38 PM - Re: NACA Scoops (George Swinford)
17. 04:57 PM - Re: NACA Scoops (Bill Naumuk)
18. 05:09 PM - Re: NACA Scoops (jaybannist@cs.com)
19. 05:52 PM - Re: NACA Scoops (Lawrence Webber)
20. 06:26 PM - Re: NACA Scoops (Bill Steer)
21. 06:50 PM - Re: NACA Scoops (Bill Naumuk)
22. 06:54 PM - Re: NACA Scoops (Bill Naumuk)
23. 09:12 PM - Re: NACA Scoops ()
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
As time goes by, the *HD(S)* construction web sites are disappearing.
Most of the links in CH601.org and Zenair are dead.
Below are the ones I know are active, in no particular order.
Some are brief, some are thorough, but they all can be of help as a
reference.
The quality of pictures also varies a lot, from old analog cameras to high
resolution digital.
It's interesting how technology (imaging and avionics) changed in such a
short time.
Bill Morelli
http://homepages.together.net/~billvt/
Klaus Truemper
http://www.utdallas.edu/~klaus/Airplane/airplane.html
Don Honabach
http://zodiac.pcperfect.com/default.htm
Larry McFarland
http://www.macsmachine.com/
Michel Therrien
http://mthobby.pcperfect.com/ch601/index.htm
Roger Tunsley
http://www.casterbridge.com/index.htm
Hans-Peter Schneider
http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodiac.html
Phill Polstra
http://www.geocities.com/ppolstra/plane.html
John Livsey
http://www.camilla.homelinux.net/
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HD(S) web sites |
It's been a while since I worked on my XL. Even longer since I updated my website. School has been keeping me busy. But I've been working on a research project that I am maintaining a wikisite for. It is web based and fairly easy to maintain. You don't have to know a lot of coding. You can get free ones. I use https://www.wikidot.com/ Anyone contemplating starting a site, may want to give it a look. I may move my XL content over to a wiki in the future (when I have time).
Kevin Bonds
----- Original Message -----
From: "Carlos Sa" <carlossa52@gmail.com>
Sent: Friday, June 12, 2009 9:26:18 AM GMT -06:00 US/Canada Central
Subject: Zenith-List: HD(S) web sites
As time goes by, the HD(S) construction web sites are disappearing.
Most of the links in CH601.org and Zenair are dead.
Below are the ones I know are active, in no particular order.
Some are brief, some are thorough, but they all can be of help as a reference.
The quality of pictures also varies a lot, from old analog cameras to high resolution
digital.
It's interesting how technology (imaging and avionics) changed in such a short
time.
Bill Morelli
http://homepages.together.net/~billvt/
Klaus Truemper
http://www.utdallas.edu/~klaus/Airplane/airplane.html
Don Honabach
http://zodiac.pcperfect.com/default.htm
Larry McFarland
http://www.macsmachine.com/
Michel Therrien
http://mthobby.pcperfect.com/ch601/index.htm
Roger Tunsley
http://www.casterbridge.com/index.htm
Hans-Peter Schneider
http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodiac.html
Phill Polstra
http://www.geocities.com/ppolstra/plane.html
John Livsey
http://www.camilla.homelinux.net/
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HD(S) web sites |
Carlos
The Scrapbook add-on for the Mozilla Firefox browser lets you save a copy
of any website to your computer hard drive. If you're short on space, you
could download the files onto a CD or DVD. That is cheap insurance to
preserve what might prove to be an invaluable resource. You can specify the
depth that you want links saved. You just need to be careful of embedded
links to really big external sites.
A source that sometimes works for a disappeared site is a Google search for
something in the site. If the info is still in Google's cache, you can
access the data from the Cache directly from the search page. I've no idea
how long info stays in the Google's publicly accessible cache.
Terry
At 10:26 AM 6/12/2009 -0400, you wrote:
>As time goes by, the HD(S) construction web sites are disappearing.
>Most of the links in CH601.org and Zenair are dead.
>
>Below are the ones I know are active, in no particular order.
>Some are brief, some are thorough, but they all can be of help as a reference.
>The quality of pictures also varies a lot, from old analog cameras to high
>resolution digital.
>It's interesting how technology (imaging and avionics) changed in such a
>short time.
>
>
>Bill Morelli
><http://homepages.together.net/~billvt/>http://homepages.together.net/~billvt/
>
>Klaus Truemper
><http://www.utdallas.edu/~klaus/Airplane/airplane.html>http://www.utdallas.edu/~klaus/Airplane/airplane.html
>
>Don Honabach
><http://zodiac.pcperfect.com/default.htm>http://zodiac.pcperfect.com/default.htm
>
>Larry McFarland
><http://www.macsmachine.com/>http://www.macsmachine.com/
>
>Michel Therrien
><http://mthobby.pcperfect.com/ch601/index.htm>http://mthobby.pcperfect.com/ch601/index.htm
>
>Roger Tunsley
><http://www.casterbridge.com/index.htm>http://www.casterbridge.com/index.htm
>
>Hans-Peter Schneider
><http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodiac.html>http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodiac.html
>
>Phill Polstra
><http://www.geocities.com/ppolstra/plane.html>http://www.geocities.com/ppolstra/plane.html
>
>John Livsey
><http://www.camilla.homelinux.net/>http://www.camilla.homelinux.net/
Terry Phillips ZBAGer
ttp44~at~rkymtn.net
Corvallis MT
601XL/Jab 3300 s .. l .. o .. o .. w build kit - Tail, flaps, & ailerons
are done; waiting on the wings
http://www.mykitlog.com/N47TP/
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HD(S) web sites |
Carlos-
Nice thought, and good work.
The interesting thing is that the projects of the people on your
list that I recognise are scratch modified to incorporate many of the
features of later models or first-off ideas. You almost can't call them
601HD(S)s, but 625HDXLs!
Bill
----- Original Message -----
From: Carlos Sa
To: zenith-list@matronics.com
Sent: Friday, June 12, 2009 10:26 AM
Subject: Zenith-List: HD(S) web sites
As time goes by, the HD(S) construction web sites are disappearing.
Most of the links in CH601.org and Zenair are dead.
Below are the ones I know are active, in no particular order.
Some are brief, some are thorough, but they all can be of help as a
reference.
The quality of pictures also varies a lot, from old analog cameras to
high resolution digital.
It's interesting how technology (imaging and avionics) changed in such
a short time.
Bill Morelli
http://homepages.together.net/~billvt/
Klaus Truemper
http://www.utdallas.edu/~klaus/Airplane/airplane.html
Don Honabach
http://zodiac.pcperfect.com/default.htm
Larry McFarland
http://www.macsmachine.com/
Michel Therrien
http://mthobby.pcperfect.com/ch601/index.htm
Roger Tunsley
http://www.casterbridge.com/index.htm
Hans-Peter Schneider
http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodi
ac.html
Phill Polstra
http://www.geocities.com/ppolstra/plane.html
John Livsey
http://www.camilla.homelinux.net/
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HD(S) web sites |
It might be a worthwhile project to capture the sites that are remaining, and
place a copy on a website somewhere that will be there a while. Google
archived copies could be placed at the same location.
If something like this isn't done, the information will simply be lost.
--
=============================================
You can check on my aircraft construction
progress at: http://www.mykitlog.com/santaigo
================================================
Jim B. Belcher
BS, MS Physics, math, Computer Science
A&P/IA
Instrument Rated Pilot
General Radio Telephone Certificate
Retired Aerospace Technical Manager
================================================
--
============================================
Do not archive.
============================================
Jim B Belcher
BS, MS Physics, Math, Computer Science
A&P/IA
Retired aerospace technical manager
============================================
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HD(S) web sites |
Thank you all for the feedback.
I have been keeping some information from this sites as I go along, but
Scrapbook deserves a test.
Disk space these days is real cheap.
If anybody has additional links, please post them here.
Happy building
Carlos
CH601-HD, plans
working on centre wing
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HD(S) web sites |
You can include http://www.hodges.aero.
--------
Mitch Hodges
N601MH (Zenith 601HDS)
Builder Log at http://www.hodges.aero
Wings Under Perpetual Construction
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=247853#247853
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: HD(S) web sites |
At 10:26 12-06-09, you wrote:
>As time goes by, the HD(S) construction web sites are disappearing.
>Most of the links in CH601.org and Zenair are dead.
If one still has the old links, archive.org might help to find
archived versions of old sites.
It worked very well for the old location of my (rarely updated) site
before the ISP name changed, but I had to have the exact URL to be
able to find it.
(e.g., for the dead link "http://web.ionsys.com/~pchapman/" I wasn't
able to find it searching just on "ionsys" and/or "pchapman").
So what other 601 or Zenith "community" websites are there?
Zenith Webring
http://www.webring.com/hub?ring=zenithbuilders
The Zenith webring hasn't been maintained or promoted for a long time
and only includes 15 entries. Presumably people could still add or
subtract themselves from the list but it is not really a current place to be.
Zenith builder pages
http://www.zenithair.com/bldr/bldr.htm
This used to have builder contact info (that one had to email in) but
I can't find it any more from that page.
Given the number of links on the page to zenith.aero I assume the
latter takes over that function??
CH601.org
Has some links. More of a traditional admin coded site, so it seems
one has to email in any changes to the 601 web site list the site has
links from.
zenith.aero
The slickest and most modern of the sites -- looks like it is
becoming the place to be?
(But I personally prefer the Matronics email lists still, over the
zenith.aero forums.)
Plenty of user updateable parts -- contact info, blogs, friends,
photo, video, a wall, etc.
zenair.org
Not sure what's on there - perhaps someone else can say.
One has to get an account from the admin, which is available when one
is a subscriber to the newsletter by Jon Croke.
A whole other topic is what free sites one might go to to post one's
own website, blog, videos etc, if one wants to go beyond the format
allowed by say zenith.aero.
Peter Chapman
Toronto, ON 601 HDS / 912 / C-GZDC
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
All-
Can anyone provide the ACS part no. for the NACA cabin fresh air
scoops? You know, the ones that you mount over triangular holes in the
forward fuse side skins.
Thanks.
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
This?
http://www.aircraftspruce.com/catalog/appages/nacascoop.php
2009/6/12 Bill Naumuk <naumuk@windstream.net>
> All-
> Can anyone provide the ACS part no. for the NACA cabin fresh air
> scoops? You know, the ones that you mount over triangular holes in the
> forward fuse side skins.
> Thanks.
> Bill Naumuk
> Townville, Pa.
> HDS N601MG/Corvair 95%
>
> **
>
>
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Carlos-
Yes, but which one?
Bill
----- Original Message -----
From: Carlos Sa
To: zenith-list@matronics.com
Sent: Friday, June 12, 2009 6:19 PM
Subject: Re: Zenith-List: NACA Scoops
This?
http://www.aircraftspruce.com/catalog/appages/nacascoop.php
2009/6/12 Bill Naumuk <naumuk@windstream.net>
All-
Can anyone provide the ACS part no. for the NACA cabin fresh air
scoops? You know, the ones that you mount over triangular holes in the
forward fuse side skins.
Thanks.
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill,
I don't see anything in ACS that closely resembles the ZAC inlet; and they are
$20 to $80.? The ZAC part is 6B20-4 and two of them cost $11.10.
Jay Bannister
do not archive
-----Original Message-----
From: Bill Naumuk <naumuk@windstream.net>
Sent: Fri, 12 Jun 2009 5:09 pm
Subject: Zenith-List: NACA Scoops
All-
??? Can anyone provide the ACS part
no. for the NACA cabin fresh air scoops? You know, the ones that you mount over
triangular holes in the forward fuse side skins.
??? Thanks.
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair
95%
________________________________________________________________________
Email message sent from CompuServe - visit us today at http://www.cs.com
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill, I made mine from scrap .025, they work great. Zenith drawing
attached.
Bill Naumuk wrote:
> All-
> Can anyone provide the ACS part no. for the NACA cabin fresh air
> scoops? You know, the ones that you mount over triangular holes in the
> forward fuse side skins.
> Thanks.
> Bill Naumuk
> Townville, Pa.
> HDS N601MG/Corvair 95%
> *
>
>
> *
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Jay-
Thanks- you can navigate through the Zenith site better than I can.
Speaking of which- can you find the latch assemblies for the canopy? I
thought they came with the lock, but not so.
Bill
----- Original Message -----
From: jaybannist@cs.com
To: zenith-list@matronics.com
Sent: Friday, June 12, 2009 6:47 PM
Subject: Re: Zenith-List: NACA Scoops
Bill,
I don't see anything in ACS that closely resembles the ZAC inlet; and
they are $20 to $80. The ZAC part is 6B20-4 and two of them cost
$11.10.
Jay Bannister
do not archive
-----Original Message-----
From: Bill Naumuk <naumuk@windstream.net>
To: zenith list <zenith-list@matronics.com>
Sent: Fri, 12 Jun 2009 5:09 pm
Subject: Zenith-List: NACA Scoops
All-
Can anyone provide the ACS part no. for the NACA cabin fresh air
scoops? You know, the ones that you mount over triangular holes in the
forward fuse side skins.
Thanks.
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
-------------------------------------------------------------------------
-----
Email message sent from CompuServe - visit us today at
http://www.cs.com
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Van's Aircraft has them too at a pretty good price. Quality is good.
http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1244848854-148-15&browse=heatvent&product=ventilation-components
Matt Dralle
RV-8 #82880 N998RV
At 04:09 PM 6/12/2009 Friday, you wrote:
>Bill, I made mine from scrap .025, they work great. Zenith drawing attached.
>
>Bill Naumuk wrote:
>>All-
>> Can anyone provide the ACS part no. for the NACA cabin fresh air scoops?
You know, the ones that you mount over triangular holes in the forward fuse side
skins.
>> Thanks.
>>Bill Naumuk
>>Townville, Pa.
>>HDS N601MG/Corvair 95%
>>*
>>
>>
>>*
>
>
Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I got mine from Van's. Very pleased with them.
George Swinford
do not archive
----- Original Message -----
From: "Matt Dralle" <dralle@matronics.com>
Sent: Friday, June 12, 2009 4:22 PM
Subject: Re: Zenith-List: NACA Scoops
>
> Van's Aircraft has them too at a pretty good price. Quality is good.
>
>
> http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1244848854-148-15&browse=heatvent&product=ventilation-components
>
>
> Matt Dralle
> RV-8 #82880 N998RV
>
>
> At 04:09 PM 6/12/2009 Friday, you wrote:
>>Bill, I made mine from scrap .025, they work great. Zenith drawing
>>attached.
>>
>>Bill Naumuk wrote:
>>>All-
>>> Can anyone provide the ACS part no. for the NACA cabin fresh air
>>> scoops? You know, the ones that you mount over triangular holes in the
>>> forward fuse side skins.
>>> Thanks.
>>>Bill Naumuk
>>>Townville, Pa.
>>>HDS N601MG/Corvair 95%
>>>*
>>>
>>>
>>>*
>>
>>
>
>
> Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
> 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
> http://www.matronics.com/ WWW | Featuring Products For Aircraft
>
>
>
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Leo-
Where in the heck did you get the drawing? I don't even have a "B"
section in my prints!
Out of curiosity, how many pages of prints did you get, and how many
pages in the builder's manual? I swear I didn't get a complete set of
either. Not that it really matters at this point.
Bill
----- Original Message -----
From: "Leo Gates" <leo@zuehlfield.com>
Sent: Friday, June 12, 2009 7:09 PM
Subject: Re: Zenith-List: NACA Scoops
> Bill, I made mine from scrap .025, they work great. Zenith drawing
> attached.
>
> Bill Naumuk wrote:
>> All-
>> Can anyone provide the ACS part no. for the NACA cabin fresh air
>> scoops? You know, the ones that you mount over triangular holes in the
>> forward fuse side skins.
>> Thanks.
>> Bill Naumuk
>> Townville, Pa.
>> HDS N601MG/Corvair 95%
>> *
>>
>>
>> *
>
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill,
You weren't specific, so I have to assume that you are talking about an XL style
canopy on your HDS.? My XL drawings call out a Latch Casing P/N 1185K.? The
ZAC parts list for an XL canopy shows Non-Locking Latch Assembly P/N 6C4; and
Locking Latch Assembly P/N 6C4-1 Locking.
Jay Bannister
Do not archive
-----Original Message-----
From: Bill Naumuk <naumuk@windstream.net>
Sent: Fri, 12 Jun 2009 6:21 pm
Subject: Re: Zenith-List: NACA Scoops
Jay-
??? Thanks- you can navigate through
the Zenith site better than I can. Speaking of which- can you find the latch
assemblies for the canopy? I thought they came with the lock, but not
so.
??? ???
??? ??? ??? ???
??? ??? ??? ???
??? ??? ??? ???
??? ??? ??? ???
??? ??? Bill
----- Original Message -----
From:
jaybannist@cs.com
Sent: Friday, June 12, 2009 6:47 PM
Subject: Re: Zenith-List: NACA
Scoops
Bill,
I don't see
anything in ACS that closely resembles the ZAC inlet; and they are $20 to
$80.? The ZAC part is 6B20-4 and two of them cost $11.10.
Jay
Bannister
do not archive
-----Original Message-----
From: Bill Naumuk <naumuk@windstream.net>
zenith list <zenith-list@matronics.com>
Sent:
Fri, 12 Jun 2009 5:09 pm
Subject: Zenith-List: NACA Scoops
All-
??? Can anyone provide the ACS
part no. for the NACA cabin fresh air scoops? You know, the ones that you
mount over triangular holes in the forward fuse side skins.
??? Thanks.
Bill Naumuk
Townville, Pa.
HDS
N601MG/Corvair 95%
Email message sent from CompuServe - visit us today at http://www.cs.com
href="http://www.matronics.com/Navigator?Zenith-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
________________________________________________________________________
Email message sent from CompuServe - visit us today at http://www.cs.com
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill like you i never got the rest of the builders manual it
just kind of drifted off..... how many G drawings and how many S drawings
didyou get
Larry
> From: naumuk@windstream.net
> To: zenith-list@matronics.com
> Subject: Re: Zenith-List: NACA Scoops
> Date: Fri=2C 12 Jun 2009 19:56:18 -0400
>
>
> Leo-
> Where in the heck did you get the drawing? I don't even have a "B"
> section in my prints!
> Out of curiosity=2C how many pages of prints did you get=2C and how many
> pages in the builder's manual? I swear I didn't get a complete set of
> either. Not that it really matters at this point.
>
> Bill
> ----- Original Message -----
> From: "Leo Gates" <leo@zuehlfield.com>
> To: <zenith-list@matronics.com>
> Sent: Friday=2C June 12=2C 2009 7:09 PM
> Subject: Re: Zenith-List: NACA Scoops
>
>
> > Bill=2C I made mine from scrap .025=2C they work great. Zenith drawing
> > attached.
> >
> > Bill Naumuk wrote:
> >> All-
> >> Can anyone provide the ACS part no. for the NACA cabin fresh air
> >> scoops? You know=2C the ones that you mount over triangular holes in t
he
> >> forward fuse side skins.
> >> Thanks.
> >> Bill Naumuk
> >> Townville=2C Pa.
> >> HDS N601MG/Corvair 95%
> >> *
> >>
> >>
> >> *
> >
>
>
===========
===========
===========
===========
>
>
>
_________________________________________________________________
Lauren found her dream laptop. Find the PC that=92s right for you.
http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Like others on the list, I got mine from Van's. Great quality, complete
kit except for the rivets and gasket material. I ended up using a
little more than a foot of the supplied six feet of scat tubing, so be
sure to plan ahead if you're going that route.
Bill Steer
N109BS, 601HD/Stratus
Bill Naumuk wrote:
> All-
> Can anyone provide the ACS part no. for the NACA cabin fresh air
> scoops? You know, the ones that you mount over triangular holes in the
> forward fuse side skins.
> Thanks.
> Bill Naumuk
> Townville, Pa.
> HDS N601MG/Corvair 95%
> *
> *
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Larry-
As in 6G-..., 6S-...? None. Leo's drawing was the first I ever saw
of a 6B-.
You cruise along through the manual and all of a sudden fall off the
edge of the earth! If it weren't for the old-timers on the list I would
have been dead in the water 2 years ago. I spend an easy 4 hours
researching for every hour I spend building.
Bill
----- Original Message -----
From: Lawrence Webber
To: zenith-list@matronics.com
Sent: Friday, June 12, 2009 8:51 PM
Subject: RE: Zenith-List: NACA Scoops
Bill like you i never got the rest of the builders manual it
just kind of drifted off..... how many G drawings and how many S
drawings didyou get
Larry
> From: naumuk@windstream.net
> To: zenith-list@matronics.com
> Subject: Re: Zenith-List: NACA Scoops
> Date: Fri, 12 Jun 2009 19:56:18 -0400
>
<naumuk@windstream.net>
>
> Leo-
> Where in the heck did you get the drawing? I don't even have a "B"
> section in my prints!
> Out of curiosity, how many pages of prints did you get, and how many
> pages in the builder's manual? I swear I didn't get a complete set
of
> either. Not that it really matters at this point.
>
> Bill
> ----- Original Message -----
> From: "Leo Gates" <leo@zuehlfield.com>
> To: <zenith-list@matronics.com>
> Sent: Friday, June 12, 2009 7:09 PM
> Subject: Re: Zenith-List: NACA Scoops
>
>
> > Bill, I made mine from scrap .025, they work great. Zenith drawing
> > attached.
> >
> > Bill Naumuk wrote:
> >> All-
> >> Can anyone provide the ACS part no. for the NACA cabin fresh air
> >> scoops? You know, the ones that you mount over triangular holes
in the
> >> forward fuse side skins.
> >> Thanks.
> >> Bill Naumuk
> >> Townville, Pa.
> >> HDS N601MG/Corvair 95%
> >> *
> >>
> >>
> >> *
> >
>=============
>
>
>
-------------------------------------------------------------------------
-----
Lauren found her dream laptop. Find the PC that=92s right for you.
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Jay-
Yes, I'm converting from side to forward opening.
That's what threw me, too. I got the locking latch assembly, but all
it consists of is the handle. I also have the print reference to the
latch casing, but can't find a listing on the Zenith site. I have an
e-mail in to Zenith but probably should have called- now I won't find
out until Monday.
Bill
----- Original Message -----
From: jaybannist@cs.com
To: zenith-list@matronics.com
Sent: Friday, June 12, 2009 8:00 PM
Subject: Re: Zenith-List: NACA Scoops
Bill,
You weren't specific, so I have to assume that you are talking about
an XL style canopy on your HDS. My XL drawings call out a Latch Casing
P/N 1185K. The ZAC parts list for an XL canopy shows Non-Locking Latch
Assembly P/N 6C4; and Locking Latch Assembly P/N 6C4-1 Locking.
Jay Bannister
Do not archive
-----Original Message-----
From: Bill Naumuk <naumuk@windstream.net>
To: zenith-list@matronics.com
Sent: Fri, 12 Jun 2009 6:21 pm
Subject: Re: Zenith-List: NACA Scoops
Jay-
Thanks- you can navigate through the Zenith site better than I
can. Speaking of which- can you find the latch assemblies for the
canopy? I thought they came with the lock, but not so.
Bill
----- Original Message -----
From: jaybannist@cs.com
To: zenith-list@matronics.com
Sent: Friday, June 12, 2009 6:47 PM
Subject: Re: Zenith-List: NACA Scoops
Bill,
I don't see anything in ACS that closely resembles the ZAC inlet;
and they are $20 to $80. The ZAC part is 6B20-4 and two of them cost
$11.10.
Jay Bannister
do not archive
-----Original Message-----
From: Bill Naumuk <naumuk@windstream.net>
To: zenith list <zenith-list@matronics.com>
Sent: Fri, 12 Jun 2009 5:09 pm
Subject: Zenith-List: NACA Scoops
All-
Can anyone provide the ACS part no. for the NACA cabin fresh air
scoops? You know, the ones that you mount over triangular holes in the
forward fuse side skins.
Thanks.
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
-------------------------------------------------------------------------
---
Email message sent from CompuServe - visit us today at
http://www.cs.com
href="http://www.matronics.com/Navigator?Zenith-List">http://www.matron
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
-------------------------------------------------------------------------
-----
Email message sent from CompuServe - visit us today at
http://www.cs.com
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Bill,
I also fabricated some of the Zenith scoops. Zenith did not send the drawings
to builders. I got mine from the Zenith website. Zenith was good about posting
stuff to the website and not notifying builders
I debated about using the Van's scoops but decided not to because they are plastic
and I did not know how long they would last here in Arizona.
Jerry
---- Bill Naumuk <naumuk@windstream.net> wrote:
> Larry-
> As in 6G-..., 6S-...? None. Leo's drawing was the first I ever saw of a 6B-.
> You cruise along through the manual and all of a sudden fall off the edge
of the earth! If it weren't for the old-timers on the list I would have been
dead in the water 2 years ago. I spend an easy 4 hours researching for every hour
I spend building.
> Bill
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|