---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Fri 06/12/09: 23 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:42 AM - HD(S) web sites (Carlos Sa) 2. 08:58 AM - Re: HD(S) web sites (KEVINBONDS@comcast.net) 3. 09:19 AM - Re: HD(S) web sites (Terry Phillips) 4. 09:21 AM - Re: HD(S) web sites (Bill Naumuk) 5. 09:35 AM - Re: HD(S) web sites (Jim Belcher) 6. 10:26 AM - Re: HD(S) web sites (Carlos Sa) 7. 11:02 AM - Re: HD(S) web sites (Mitch Hodges) 8. 11:48 AM - Re: HD(S) web sites (Peter Chapman) 9. 03:10 PM - NACA Scoops (Bill Naumuk) 10. 03:20 PM - Re: NACA Scoops (Carlos Sa) 11. 03:44 PM - Re: NACA Scoops (Bill Naumuk) 12. 03:51 PM - Re: NACA Scoops (jaybannist@cs.com) 13. 04:13 PM - Re: NACA Scoops (Leo Gates) 14. 04:21 PM - Re: NACA Scoops (Bill Naumuk) 15. 04:22 PM - Re: NACA Scoops (Matt Dralle) 16. 04:38 PM - Re: NACA Scoops (George Swinford) 17. 04:57 PM - Re: NACA Scoops (Bill Naumuk) 18. 05:09 PM - Re: NACA Scoops (jaybannist@cs.com) 19. 05:52 PM - Re: NACA Scoops (Lawrence Webber) 20. 06:26 PM - Re: NACA Scoops (Bill Steer) 21. 06:50 PM - Re: NACA Scoops (Bill Naumuk) 22. 06:54 PM - Re: NACA Scoops (Bill Naumuk) 23. 09:12 PM - Re: NACA Scoops () ________________________________ Message 1 _____________________________________ Time: 07:42:47 AM PST US Subject: Zenith-List: HD(S) web sites From: Carlos Sa As time goes by, the *HD(S)* construction web sites are disappearing. Most of the links in CH601.org and Zenair are dead. Below are the ones I know are active, in no particular order. Some are brief, some are thorough, but they all can be of help as a reference. The quality of pictures also varies a lot, from old analog cameras to high resolution digital. It's interesting how technology (imaging and avionics) changed in such a short time. Bill Morelli http://homepages.together.net/~billvt/ Klaus Truemper http://www.utdallas.edu/~klaus/Airplane/airplane.html Don Honabach http://zodiac.pcperfect.com/default.htm Larry McFarland http://www.macsmachine.com/ Michel Therrien http://mthobby.pcperfect.com/ch601/index.htm Roger Tunsley http://www.casterbridge.com/index.htm Hans-Peter Schneider http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodiac.html Phill Polstra http://www.geocities.com/ppolstra/plane.html John Livsey http://www.camilla.homelinux.net/ ________________________________ Message 2 _____________________________________ Time: 08:58:01 AM PST US From: KEVINBONDS@comcast.net Subject: Re: Zenith-List: HD(S) web sites It's been a while since I worked on my XL. Even longer since I updated my website. School has been keeping me busy. But I've been working on a research project that I am maintaining a wikisite for. It is web based and fairly easy to maintain. You don't have to know a lot of coding. You can get free ones. I use https://www.wikidot.com/ Anyone contemplating starting a site, may want to give it a look. I may move my XL content over to a wiki in the future (when I have time). Kevin Bonds ----- Original Message ----- From: "Carlos Sa" Sent: Friday, June 12, 2009 9:26:18 AM GMT -06:00 US/Canada Central Subject: Zenith-List: HD(S) web sites As time goes by, the HD(S) construction web sites are disappearing. Most of the links in CH601.org and Zenair are dead. Below are the ones I know are active, in no particular order. Some are brief, some are thorough, but they all can be of help as a reference. The quality of pictures also varies a lot, from old analog cameras to high resolution digital. It's interesting how technology (imaging and avionics) changed in such a short time. Bill Morelli http://homepages.together.net/~billvt/ Klaus Truemper http://www.utdallas.edu/~klaus/Airplane/airplane.html Don Honabach http://zodiac.pcperfect.com/default.htm Larry McFarland http://www.macsmachine.com/ Michel Therrien http://mthobby.pcperfect.com/ch601/index.htm Roger Tunsley http://www.casterbridge.com/index.htm Hans-Peter Schneider http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodiac.html Phill Polstra http://www.geocities.com/ppolstra/plane.html John Livsey http://www.camilla.homelinux.net/ ________________________________ Message 3 _____________________________________ Time: 09:19:16 AM PST US From: Terry Phillips Subject: Re: Zenith-List: HD(S) web sites Carlos The Scrapbook add-on for the Mozilla Firefox browser lets you save a copy of any website to your computer hard drive. If you're short on space, you could download the files onto a CD or DVD. That is cheap insurance to preserve what might prove to be an invaluable resource. You can specify the depth that you want links saved. You just need to be careful of embedded links to really big external sites. A source that sometimes works for a disappeared site is a Google search for something in the site. If the info is still in Google's cache, you can access the data from the Cache directly from the search page. I've no idea how long info stays in the Google's publicly accessible cache. Terry At 10:26 AM 6/12/2009 -0400, you wrote: >As time goes by, the HD(S) construction web sites are disappearing. >Most of the links in CH601.org and Zenair are dead. > >Below are the ones I know are active, in no particular order. >Some are brief, some are thorough, but they all can be of help as a reference. >The quality of pictures also varies a lot, from old analog cameras to high >resolution digital. >It's interesting how technology (imaging and avionics) changed in such a >short time. > > >Bill Morelli >http://homepages.together.net/~billvt/ > >Klaus Truemper >http://www.utdallas.edu/~klaus/Airplane/airplane.html > >Don Honabach >http://zodiac.pcperfect.com/default.htm > >Larry McFarland >http://www.macsmachine.com/ > >Michel Therrien >http://mthobby.pcperfect.com/ch601/index.htm > >Roger Tunsley >http://www.casterbridge.com/index.htm > >Hans-Peter Schneider >http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodiac.html > >Phill Polstra >http://www.geocities.com/ppolstra/plane.html > >John Livsey >http://www.camilla.homelinux.net/ Terry Phillips ZBAGer ttp44~at~rkymtn.net Corvallis MT 601XL/Jab 3300 s .. l .. o .. o .. w build kit - Tail, flaps, & ailerons are done; waiting on the wings http://www.mykitlog.com/N47TP/ ________________________________ Message 4 _____________________________________ Time: 09:21:33 AM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: HD(S) web sites Carlos- Nice thought, and good work. The interesting thing is that the projects of the people on your list that I recognise are scratch modified to incorporate many of the features of later models or first-off ideas. You almost can't call them 601HD(S)s, but 625HDXLs! Bill ----- Original Message ----- From: Carlos Sa To: zenith-list@matronics.com Sent: Friday, June 12, 2009 10:26 AM Subject: Zenith-List: HD(S) web sites As time goes by, the HD(S) construction web sites are disappearing. Most of the links in CH601.org and Zenair are dead. Below are the ones I know are active, in no particular order. Some are brief, some are thorough, but they all can be of help as a reference. The quality of pictures also varies a lot, from old analog cameras to high resolution digital. It's interesting how technology (imaging and avionics) changed in such a short time. Bill Morelli http://homepages.together.net/~billvt/ Klaus Truemper http://www.utdallas.edu/~klaus/Airplane/airplane.html Don Honabach http://zodiac.pcperfect.com/default.htm Larry McFarland http://www.macsmachine.com/ Michel Therrien http://mthobby.pcperfect.com/ch601/index.htm Roger Tunsley http://www.casterbridge.com/index.htm Hans-Peter Schneider http://www.hanspeterschneider.de/English/Hauptseite/Navigation/index_Zodi ac.html Phill Polstra http://www.geocities.com/ppolstra/plane.html John Livsey http://www.camilla.homelinux.net/ ________________________________ Message 5 _____________________________________ Time: 09:35:46 AM PST US From: Jim Belcher Subject: Re: Zenith-List: HD(S) web sites It might be a worthwhile project to capture the sites that are remaining, and place a copy on a website somewhere that will be there a while. Google archived copies could be placed at the same location. If something like this isn't done, the information will simply be lost. -- ============================================= You can check on my aircraft construction progress at: http://www.mykitlog.com/santaigo ================================================ Jim B. Belcher BS, MS Physics, math, Computer Science A&P/IA Instrument Rated Pilot General Radio Telephone Certificate Retired Aerospace Technical Manager ================================================ -- ============================================ Do not archive. ============================================ Jim B Belcher BS, MS Physics, Math, Computer Science A&P/IA Retired aerospace technical manager ============================================ ________________________________ Message 6 _____________________________________ Time: 10:26:31 AM PST US Subject: Re: Zenith-List: HD(S) web sites From: Carlos Sa Thank you all for the feedback. I have been keeping some information from this sites as I go along, but Scrapbook deserves a test. Disk space these days is real cheap. If anybody has additional links, please post them here. Happy building Carlos CH601-HD, plans working on centre wing ________________________________ Message 7 _____________________________________ Time: 11:02:23 AM PST US Subject: Zenith-List: Re: HD(S) web sites From: "Mitch Hodges" You can include http://www.hodges.aero. -------- Mitch Hodges N601MH (Zenith 601HDS) Builder Log at http://www.hodges.aero Wings Under Perpetual Construction Read this topic online here: http://forums.matronics.com/viewtopic.php?p=247853#247853 ________________________________ Message 8 _____________________________________ Time: 11:48:32 AM PST US From: Peter Chapman Subject: Re: Zenith-List: HD(S) web sites At 10:26 12-06-09, you wrote: >As time goes by, the HD(S) construction web sites are disappearing. >Most of the links in CH601.org and Zenair are dead. If one still has the old links, archive.org might help to find archived versions of old sites. It worked very well for the old location of my (rarely updated) site before the ISP name changed, but I had to have the exact URL to be able to find it. (e.g., for the dead link "http://web.ionsys.com/~pchapman/" I wasn't able to find it searching just on "ionsys" and/or "pchapman"). So what other 601 or Zenith "community" websites are there? Zenith Webring http://www.webring.com/hub?ring=zenithbuilders The Zenith webring hasn't been maintained or promoted for a long time and only includes 15 entries. Presumably people could still add or subtract themselves from the list but it is not really a current place to be. Zenith builder pages http://www.zenithair.com/bldr/bldr.htm This used to have builder contact info (that one had to email in) but I can't find it any more from that page. Given the number of links on the page to zenith.aero I assume the latter takes over that function?? CH601.org Has some links. More of a traditional admin coded site, so it seems one has to email in any changes to the 601 web site list the site has links from. zenith.aero The slickest and most modern of the sites -- looks like it is becoming the place to be? (But I personally prefer the Matronics email lists still, over the zenith.aero forums.) Plenty of user updateable parts -- contact info, blogs, friends, photo, video, a wall, etc. zenair.org Not sure what's on there - perhaps someone else can say. One has to get an account from the admin, which is available when one is a subscriber to the newsletter by Jon Croke. A whole other topic is what free sites one might go to to post one's own website, blog, videos etc, if one wants to go beyond the format allowed by say zenith.aero. Peter Chapman Toronto, ON 601 HDS / 912 / C-GZDC ________________________________ Message 9 _____________________________________ Time: 03:10:11 PM PST US From: "Bill Naumuk" Subject: Zenith-List: NACA Scoops All- Can anyone provide the ACS part no. for the NACA cabin fresh air scoops? You know, the ones that you mount over triangular holes in the forward fuse side skins. Thanks. Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% ________________________________ Message 10 ____________________________________ Time: 03:20:51 PM PST US Subject: Re: Zenith-List: NACA Scoops From: Carlos Sa This? http://www.aircraftspruce.com/catalog/appages/nacascoop.php 2009/6/12 Bill Naumuk > All- > Can anyone provide the ACS part no. for the NACA cabin fresh air > scoops? You know, the ones that you mount over triangular holes in the > forward fuse side skins. > Thanks. > Bill Naumuk > Townville, Pa. > HDS N601MG/Corvair 95% > > ** > > ________________________________ Message 11 ____________________________________ Time: 03:44:18 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: NACA Scoops Carlos- Yes, but which one? Bill ----- Original Message ----- From: Carlos Sa To: zenith-list@matronics.com Sent: Friday, June 12, 2009 6:19 PM Subject: Re: Zenith-List: NACA Scoops This? http://www.aircraftspruce.com/catalog/appages/nacascoop.php 2009/6/12 Bill Naumuk All- Can anyone provide the ACS part no. for the NACA cabin fresh air scoops? You know, the ones that you mount over triangular holes in the forward fuse side skins. Thanks. Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% ________________________________ Message 12 ____________________________________ Time: 03:51:04 PM PST US Subject: Re: Zenith-List: NACA Scoops From: jaybannist@cs.com Bill, I don't see anything in ACS that closely resembles the ZAC inlet; and they are $20 to $80.? The ZAC part is 6B20-4 and two of them cost $11.10. Jay Bannister do not archive -----Original Message----- From: Bill Naumuk Sent: Fri, 12 Jun 2009 5:09 pm Subject: Zenith-List: NACA Scoops All- ??? Can anyone provide the ACS part no. for the NACA cabin fresh air scoops? You know, the ones that you mount over triangular holes in the forward fuse side skins. ??? Thanks. Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% ________________________________________________________________________ Email message sent from CompuServe - visit us today at http://www.cs.com ________________________________ Message 13 ____________________________________ Time: 04:13:56 PM PST US From: Leo Gates Subject: Re: Zenith-List: NACA Scoops Bill, I made mine from scrap .025, they work great. Zenith drawing attached. Bill Naumuk wrote: > All- > Can anyone provide the ACS part no. for the NACA cabin fresh air > scoops? You know, the ones that you mount over triangular holes in the > forward fuse side skins. > Thanks. > Bill Naumuk > Townville, Pa. > HDS N601MG/Corvair 95% > * > > > * ________________________________ Message 14 ____________________________________ Time: 04:21:56 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: NACA Scoops Jay- Thanks- you can navigate through the Zenith site better than I can. Speaking of which- can you find the latch assemblies for the canopy? I thought they came with the lock, but not so. Bill ----- Original Message ----- From: jaybannist@cs.com To: zenith-list@matronics.com Sent: Friday, June 12, 2009 6:47 PM Subject: Re: Zenith-List: NACA Scoops Bill, I don't see anything in ACS that closely resembles the ZAC inlet; and they are $20 to $80. The ZAC part is 6B20-4 and two of them cost $11.10. Jay Bannister do not archive -----Original Message----- From: Bill Naumuk To: zenith list Sent: Fri, 12 Jun 2009 5:09 pm Subject: Zenith-List: NACA Scoops All- Can anyone provide the ACS part no. for the NACA cabin fresh air scoops? You know, the ones that you mount over triangular holes in the forward fuse side skins. Thanks. Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% ------------------------------------------------------------------------- ----- Email message sent from CompuServe - visit us today at http://www.cs.com ________________________________ Message 15 ____________________________________ Time: 04:22:40 PM PST US From: Matt Dralle Subject: Re: Zenith-List: NACA Scoops Van's Aircraft has them too at a pretty good price. Quality is good. http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1244848854-148-15&browse=heatvent&product=ventilation-components Matt Dralle RV-8 #82880 N998RV At 04:09 PM 6/12/2009 Friday, you wrote: >Bill, I made mine from scrap .025, they work great. Zenith drawing attached. > >Bill Naumuk wrote: >>All- >> Can anyone provide the ACS part no. for the NACA cabin fresh air scoops? You know, the ones that you mount over triangular holes in the forward fuse side skins. >> Thanks. >>Bill Naumuk >>Townville, Pa. >>HDS N601MG/Corvair 95% >>* >> >> >>* > > Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft ________________________________ Message 16 ____________________________________ Time: 04:38:02 PM PST US From: "George Swinford" Subject: Re: Zenith-List: NACA Scoops I got mine from Van's. Very pleased with them. George Swinford do not archive ----- Original Message ----- From: "Matt Dralle" Sent: Friday, June 12, 2009 4:22 PM Subject: Re: Zenith-List: NACA Scoops > > Van's Aircraft has them too at a pretty good price. Quality is good. > > > http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1244848854-148-15&browse=heatvent&product=ventilation-components > > > Matt Dralle > RV-8 #82880 N998RV > > > At 04:09 PM 6/12/2009 Friday, you wrote: >>Bill, I made mine from scrap .025, they work great. Zenith drawing >>attached. >> >>Bill Naumuk wrote: >>>All- >>> Can anyone provide the ACS part no. for the NACA cabin fresh air >>> scoops? You know, the ones that you mount over triangular holes in the >>> forward fuse side skins. >>> Thanks. >>>Bill Naumuk >>>Townville, Pa. >>>HDS N601MG/Corvair 95% >>>* >>> >>> >>>* >> >> > > > Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 > 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email > http://www.matronics.com/ WWW | Featuring Products For Aircraft > > > ________________________________ Message 17 ____________________________________ Time: 04:57:51 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: NACA Scoops Leo- Where in the heck did you get the drawing? I don't even have a "B" section in my prints! Out of curiosity, how many pages of prints did you get, and how many pages in the builder's manual? I swear I didn't get a complete set of either. Not that it really matters at this point. Bill ----- Original Message ----- From: "Leo Gates" Sent: Friday, June 12, 2009 7:09 PM Subject: Re: Zenith-List: NACA Scoops > Bill, I made mine from scrap .025, they work great. Zenith drawing > attached. > > Bill Naumuk wrote: >> All- >> Can anyone provide the ACS part no. for the NACA cabin fresh air >> scoops? You know, the ones that you mount over triangular holes in the >> forward fuse side skins. >> Thanks. >> Bill Naumuk >> Townville, Pa. >> HDS N601MG/Corvair 95% >> * >> >> >> * > ________________________________ Message 18 ____________________________________ Time: 05:09:30 PM PST US Subject: Re: Zenith-List: NACA Scoops From: jaybannist@cs.com Bill, You weren't specific, so I have to assume that you are talking about an XL style canopy on your HDS.? My XL drawings call out a Latch Casing P/N 1185K.? The ZAC parts list for an XL canopy shows Non-Locking Latch Assembly P/N 6C4; and Locking Latch Assembly P/N 6C4-1 Locking. Jay Bannister Do not archive -----Original Message----- From: Bill Naumuk Sent: Fri, 12 Jun 2009 6:21 pm Subject: Re: Zenith-List: NACA Scoops Jay- ??? Thanks- you can navigate through the Zenith site better than I can. Speaking of which- can you find the latch assemblies for the canopy? I thought they came with the lock, but not so. ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? Bill ----- Original Message ----- From: jaybannist@cs.com Sent: Friday, June 12, 2009 6:47 PM Subject: Re: Zenith-List: NACA Scoops Bill, I don't see anything in ACS that closely resembles the ZAC inlet; and they are $20 to $80.? The ZAC part is 6B20-4 and two of them cost $11.10. Jay Bannister do not archive -----Original Message----- From: Bill Naumuk zenith list Sent: Fri, 12 Jun 2009 5:09 pm Subject: Zenith-List: NACA Scoops All- ??? Can anyone provide the ACS part no. for the NACA cabin fresh air scoops? You know, the ones that you mount over triangular holes in the forward fuse side skins. ??? Thanks. Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% Email message sent from CompuServe - visit us today at http://www.cs.com href="http://www.matronics.com/Navigator?Zenith-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ________________________________________________________________________ Email message sent from CompuServe - visit us today at http://www.cs.com ________________________________ Message 19 ____________________________________ Time: 05:52:59 PM PST US From: Lawrence Webber Subject: RE: Zenith-List: NACA Scoops Bill like you i never got the rest of the builders manual it just kind of drifted off..... how many G drawings and how many S drawings didyou get Larry > From: naumuk@windstream.net > To: zenith-list@matronics.com > Subject: Re: Zenith-List: NACA Scoops > Date: Fri=2C 12 Jun 2009 19:56:18 -0400 > > > Leo- > Where in the heck did you get the drawing? I don't even have a "B" > section in my prints! > Out of curiosity=2C how many pages of prints did you get=2C and how many > pages in the builder's manual? I swear I didn't get a complete set of > either. Not that it really matters at this point. > > Bill > ----- Original Message ----- > From: "Leo Gates" > To: > Sent: Friday=2C June 12=2C 2009 7:09 PM > Subject: Re: Zenith-List: NACA Scoops > > > > Bill=2C I made mine from scrap .025=2C they work great. Zenith drawing > > attached. > > > > Bill Naumuk wrote: > >> All- > >> Can anyone provide the ACS part no. for the NACA cabin fresh air > >> scoops? You know=2C the ones that you mount over triangular holes in t he > >> forward fuse side skins. > >> Thanks. > >> Bill Naumuk > >> Townville=2C Pa. > >> HDS N601MG/Corvair 95% > >> * > >> > >> > >> * > > > > =========== =========== =========== =========== > > > _________________________________________________________________ Lauren found her dream laptop. Find the PC that=92s right for you. http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290 ________________________________ Message 20 ____________________________________ Time: 06:26:31 PM PST US From: Bill Steer Subject: Re: Zenith-List: NACA Scoops Like others on the list, I got mine from Van's. Great quality, complete kit except for the rivets and gasket material. I ended up using a little more than a foot of the supplied six feet of scat tubing, so be sure to plan ahead if you're going that route. Bill Steer N109BS, 601HD/Stratus Bill Naumuk wrote: > All- > Can anyone provide the ACS part no. for the NACA cabin fresh air > scoops? You know, the ones that you mount over triangular holes in the > forward fuse side skins. > Thanks. > Bill Naumuk > Townville, Pa. > HDS N601MG/Corvair 95% > * > * ________________________________ Message 21 ____________________________________ Time: 06:50:20 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: NACA Scoops Larry- As in 6G-..., 6S-...? None. Leo's drawing was the first I ever saw of a 6B-. You cruise along through the manual and all of a sudden fall off the edge of the earth! If it weren't for the old-timers on the list I would have been dead in the water 2 years ago. I spend an easy 4 hours researching for every hour I spend building. Bill ----- Original Message ----- From: Lawrence Webber To: zenith-list@matronics.com Sent: Friday, June 12, 2009 8:51 PM Subject: RE: Zenith-List: NACA Scoops Bill like you i never got the rest of the builders manual it just kind of drifted off..... how many G drawings and how many S drawings didyou get Larry > From: naumuk@windstream.net > To: zenith-list@matronics.com > Subject: Re: Zenith-List: NACA Scoops > Date: Fri, 12 Jun 2009 19:56:18 -0400 > > > Leo- > Where in the heck did you get the drawing? I don't even have a "B" > section in my prints! > Out of curiosity, how many pages of prints did you get, and how many > pages in the builder's manual? I swear I didn't get a complete set of > either. Not that it really matters at this point. > > Bill > ----- Original Message ----- > From: "Leo Gates" > To: > Sent: Friday, June 12, 2009 7:09 PM > Subject: Re: Zenith-List: NACA Scoops > > > > Bill, I made mine from scrap .025, they work great. Zenith drawing > > attached. > > > > Bill Naumuk wrote: > >> All- > >> Can anyone provide the ACS part no. for the NACA cabin fresh air > >> scoops? You know, the ones that you mount over triangular holes in the > >> forward fuse side skins. > >> Thanks. > >> Bill Naumuk > >> Townville, Pa. > >> HDS N601MG/Corvair 95% > >> * > >> > >> > >> * > > >============= > > > ------------------------------------------------------------------------- ----- Lauren found her dream laptop. Find the PC that=92s right for you. ________________________________ Message 22 ____________________________________ Time: 06:54:31 PM PST US From: "Bill Naumuk" Subject: Re: Zenith-List: NACA Scoops Jay- Yes, I'm converting from side to forward opening. That's what threw me, too. I got the locking latch assembly, but all it consists of is the handle. I also have the print reference to the latch casing, but can't find a listing on the Zenith site. I have an e-mail in to Zenith but probably should have called- now I won't find out until Monday. Bill ----- Original Message ----- From: jaybannist@cs.com To: zenith-list@matronics.com Sent: Friday, June 12, 2009 8:00 PM Subject: Re: Zenith-List: NACA Scoops Bill, You weren't specific, so I have to assume that you are talking about an XL style canopy on your HDS. My XL drawings call out a Latch Casing P/N 1185K. The ZAC parts list for an XL canopy shows Non-Locking Latch Assembly P/N 6C4; and Locking Latch Assembly P/N 6C4-1 Locking. Jay Bannister Do not archive -----Original Message----- From: Bill Naumuk To: zenith-list@matronics.com Sent: Fri, 12 Jun 2009 6:21 pm Subject: Re: Zenith-List: NACA Scoops Jay- Thanks- you can navigate through the Zenith site better than I can. Speaking of which- can you find the latch assemblies for the canopy? I thought they came with the lock, but not so. Bill ----- Original Message ----- From: jaybannist@cs.com To: zenith-list@matronics.com Sent: Friday, June 12, 2009 6:47 PM Subject: Re: Zenith-List: NACA Scoops Bill, I don't see anything in ACS that closely resembles the ZAC inlet; and they are $20 to $80. The ZAC part is 6B20-4 and two of them cost $11.10. Jay Bannister do not archive -----Original Message----- From: Bill Naumuk To: zenith list Sent: Fri, 12 Jun 2009 5:09 pm Subject: Zenith-List: NACA Scoops All- Can anyone provide the ACS part no. for the NACA cabin fresh air scoops? You know, the ones that you mount over triangular holes in the forward fuse side skins. Thanks. Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% ------------------------------------------------------------------------- --- Email message sent from CompuServe - visit us today at http://www.cs.com href="http://www.matronics.com/Navigator?Zenith-List">http://www.matron href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c ------------------------------------------------------------------------- ----- Email message sent from CompuServe - visit us today at http://www.cs.com ________________________________ Message 23 ____________________________________ Time: 09:12:38 PM PST US From: Subject: Re: Zenith-List: NACA Scoops Bill, I also fabricated some of the Zenith scoops. Zenith did not send the drawings to builders. I got mine from the Zenith website. Zenith was good about posting stuff to the website and not notifying builders I debated about using the Van's scoops but decided not to because they are plastic and I did not know how long they would last here in Arizona. Jerry ---- Bill Naumuk wrote: > Larry- > As in 6G-..., 6S-...? None. Leo's drawing was the first I ever saw of a 6B-. > You cruise along through the manual and all of a sudden fall off the edge of the earth! If it weren't for the old-timers on the list I would have been dead in the water 2 years ago. I spend an easy 4 hours researching for every hour I spend building. > Bill ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.