Today's Message Index:
----------------------
1. 05:09 AM - Re: Re: DFW Builders get together (jaybannist@cs.com)
2. 05:18 AM - 601 Flights (Rich Simmons)
3. 07:43 AM - Archive/Do not archive (Bill Naumuk)
4. 07:52 AM - Re: 601 Flights (japhillipsga@aol.com)
5. 07:52 AM - Re: Archive/Do not archive (Ken Arnold)
6. 09:22 AM - Re: Zenith601-List: Fw: Archive/Do not archive (Bryan Martin)
7. 09:36 AM - Looking for drawing - forward tilt canopy parts on fuselage (eedetail)
8. 09:48 AM - Re: Archive/Do not archive (Bill Naumuk)
9. 11:19 AM - Re: Looking for drawing - forward tilt canopy parts on fuselage (Carlos Sa)
10. 11:46 AM - Re: Looking for drawing - forward tilt canopy parts on fuselage (Bill Naumuk)
11. 11:48 AM - Archive/Do not archive_2 (Bill Naumuk)
12. 11:57 AM - Re: Archive/Do not archive (Gig Giacona)
13. 12:00 PM - Re: Looking for drawing - forward tilt canopy parts on fuselag (Gig Giacona)
14. 12:04 PM - Re: Looking for drawing - forward tilt canopy parts on fuselag (eedetail)
15. 12:09 PM - Aviation nuts, bolts, washers & cotter keys (Clyde Barcus)
16. 12:35 PM - Re: Looking for drawing - forward tilt canopy parts on fuselage (Carlos Sa)
17. 02:09 PM - Re: Aviation nuts, bolts, washers & cotter keys (Elden Jacobson)
18. 03:04 PM - Re: Aviation nuts, bolts, washers & cotter keys (Ron Lendon)
19. 03:52 PM - New local homebuilder (Bill Naumuk)
20. 04:01 PM - Re: Re: Looking for drawing - forward tilt canopy parts on fuselag (Bill Naumuk)
21. 05:42 PM - Re: New local homebuilder (Carlos Sa)
22. 07:44 PM - Re: Looking for drawing - forward tilt canopy parts on fuselage (Tim Shankland)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: DFW Builders get together |
Mike,? We will meet at 8:30 AM in the restaurant. - Jay
-----Original Message-----
From: MHerder <michaelherder@beckgroup.com>
Sent: Tue, Jul 14, 2009 10:14 pm
Subject: Zenith-List: Re: DFW Builders get together
What time are you guys planning on starting?
--------
One Rivet at a Time!
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=253071#253071
________________________________________________________________________
Email message sent from CompuServe - visit us today at http://www.cs.com
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Anybody aware of where I can get some left seat time in a 601 rental near middle
Tennessee?
Rich
Do NOt archive
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Archive/Do not archive |
All-
Tommy Walker was a little harsh on himself with his recent sign off
"Do not archive this or anything else I'm foolish enough to post" but
got me thinking- maybe the posting protocol is set up backwards. I don't
know how many times I thought I was corresponding directly with someone
and wound up on the list, or was simply brainstorming and had half-baked
ideas saved for posterity.
Instead of having to remember to add "Do not archive" to most of the
posts, how about reversing the procedure to make a poster add "Archive"
to anything that should be saved? That way, we can openly correspond or
brainstorm without clogging up the archives, yet save any final positive
outcome of the exchanges. Posts without "Archive" would die after a
certain amount of time. Just a thought.
Archive
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Rich, you can come down and fly with me. Contact me off the thread, BOG
-----Original Message-----
From: Rich Simmons <4RCSIMMONS@comcast.net>
Sent: Wed, Jul 15, 2009 8:14 am
Subject: Zenith-List: 601 Flights
Anybody aware of where I can get some left seat time in a 601 rental near middle
Tennessee?
Rich
Do NOt archive
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Archive/Do not archive |
Bill,
Can you accomplish the same thing by including "do not archive" in your
name/address area?
Ken
----- Original Message -----
From: Bill Naumuk
To: zenith list
Sent: Wednesday, July 15, 2009 10:42 AM
Subject: Zenith-List: Archive/Do not archive
All-
Tommy Walker was a little harsh on himself with his recent sign
off "Do not archive this or anything else I'm foolish enough to post"
but got me thinking- maybe the posting protocol is set up backwards. I
don't know how many times I thought I was corresponding directly with
someone and wound up on the list, or was simply brainstorming and had
half-baked ideas saved for posterity.
Instead of having to remember to add "Do not archive" to most of
the posts, how about reversing the procedure to make a poster add
"Archive" to anything that should be saved? That way, we can openly
correspond or brainstorm without clogging up the archives, yet save any
final positive outcome of the exchanges. Posts without "Archive" would
die after a certain amount of time. Just a thought.
Archive
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Zenith601-List: Fw: Archive/Do not archive |
Most email clients and web email sites, including the Matronics web
forum you can set up a signature block that can be appended to your
posts. On some it can be set up to be appended by default. You can put
the appropriate entry there.
On Jul 15, 2009, at 10:42 AM, Bill Naumuk wrote:
>
> ----- Original Message -----
> From: Bill Naumuk
> To: zenith list
> Sent: Wednesday, July 15, 2009 10:42 AM
> Subject: Archive/Do not archive
>
> All-
> Tommy Walker was a little harsh on himself with his recent sign
> off "Do not archive this or anything else I'm foolish enough to
> post" but got me thinking- maybe the posting protocol is set up
> backwards. I don't know how many times I thought I was corresponding
> directly with someone and wound up on the list, or was simply
> brainstorming and had half-baked ideas saved for posterity.
> Instead of having to remember to add "Do not archive" to most of
> the posts, how about reversing the procedure to make a poster add
> "Archive" to anything that should be saved? That way, we can openly
> correspond or brainstorm without clogging up the archives, yet save
> any final positive outcome of the exchanges. Posts without
> "Archive" would die after a certain amount of time. Just a thought.
> Archive
>
--
Bryan Martin
N61BM, CH 601 XL,
RAM Subaru, Stratus redrive.
do not archive.
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Looking for drawing - forward tilt canopy parts on fuselage |
Looking for a drawing and parts list, fitting up a forward tilting canopy to a
601HD. I've got the canopy, just looking for the hinge assy's, block for mounting
gas struts and instrument panel cover.
TimE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=253164#253164
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Archive/Do not archive |
Ken-
That's a possibility. Maybe the placement in the post is critical.
Matt's the expert.
Bill
----- Original Message -----
From: Ken Arnold
To: zenith-list@matronics.com
Sent: Wednesday, July 15, 2009 10:52 AM
Subject: Re: Zenith-List: Archive/Do not archive
Bill,
Can you accomplish the same thing by including "do not archive" in
your name/address area?
Ken
----- Original Message -----
From: Bill Naumuk
To: zenith list
Sent: Wednesday, July 15, 2009 10:42 AM
Subject: Zenith-List: Archive/Do not archive
All-
Tommy Walker was a little harsh on himself with his recent sign
off "Do not archive this or anything else I'm foolish enough to post"
but got me thinking- maybe the posting protocol is set up backwards. I
don't know how many times I thought I was corresponding directly with
someone and wound up on the list, or was simply brainstorming and had
half-baked ideas saved for posterity.
Instead of having to remember to add "Do not archive" to most of
the posts, how about reversing the procedure to make a poster add
"Archive" to anything that should be saved? That way, we can openly
correspond or brainstorm without clogging up the archives, yet save any
final positive outcome of the exchanges. Posts without "Archive" would
die after a certain amount of time. Just a thought.
Archive
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
href="http://www.matronics.com/Navigator?Zenith-List">http://www.matron
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for drawing - forward tilt canopy parts on fuselage |
Try the builder pages:
http://www.zenithair.com/bldr/index.html
then look for ZODIAC XL Updates and Online Documents,
select
Photo Assembly Guides updates
Good luck
Carlos*
***
2009/7/15 eedetail <eedetail@qwest.net>
>
> Looking for a drawing and parts list, fitting up a forward tilting canopy
> to a 601HD. I've got the canopy, just looking for the hinge assy's, block
> for mounting gas struts and instrument panel cover.
> TimE
>
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for drawing - forward tilt canopy parts on fuselage |
Carlos-
Can you still get on? I can't with the passwords, etc. I've used for
years.
Bill
----- Original Message -----
From: Carlos Sa
To: zenith-list@matronics.com
Sent: Wednesday, July 15, 2009 2:07 PM
Subject: Re: Zenith-List: Looking for drawing - forward tilt canopy
parts on fuselage
Try the builder pages:
http://www.zenithair.com/bldr/index.html
then look for ZODIAC XL Updates and Online Documents,
select
Photo Assembly Guides updates
Good luck
Carlos
2009/7/15 eedetail <eedetail@qwest.net>
Looking for a drawing and parts list, fitting up a forward tilting
canopy to a 601HD. I've got the canopy, just looking for the hinge
assy's, block for mounting gas struts and instrument panel cover.
TimE
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Archive/Do not archive_2 |
All-
The problem is, individual fixes still don't solve the problem. I
might do whatever is necessary to prevent unintentional posts, but
unless it's across the board...
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Archive/Do not archive |
One thing to remember. The "Do Not Arcivhe" command only effects the email version
of the list. It does not keep it off of the web version which mirrors everything
that goes on the email version.
A quick search on the web forum gets 18449 hits for the search term "Do AND not
AND archive".
The moral of the story is don't post stuff you don't want to be there for a long
time.
--------
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=253196#253196
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for drawing - forward tilt canopy parts on fuselag |
naumuk(at)windstream.net wrote:
> Carlos-
> Can you still get on? I can't with the passwords, etc. I've used for years.
>
Bill
>
I can with the same generic password that has been in place since at least 2002.
--------
W.R. "Gig" Giacona
601XL Under Construction
See my progress at www.peoamerica.net/N601WR
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=253197#253197
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for drawing - forward tilt canopy parts on fuselag |
Thanks,
I forgot all about that site.
Peace,
TimE
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=253199#253199
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Aviation nuts, bolts, washers & cotter keys |
Gentlemen
I purchased a huge amount (At least it is to me) of aviation nuts,
bolts, washers, etc at an estate sale. The gentlemen was an A&P and had
a very large assortment of fasteners, I made a deal with his brother for
all of it, unfortunately his brother was aware of it value but I still
managed to pay a reasonable price. I plan on taking what I need and
selling the rest, I don't know for sure at this time but I am certain it
will be less than half price for the rest which will be quite a lot. I
didn't buy this to make money, I just could not pass it up. I will sell
it in small quanties or the whole lot, let me know if you have interest
and I will send a list as soon as I have one.
Regards
Clyde
601XL
barcusc@comcast.net
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for drawing - forward tilt canopy parts on fuselage |
Yes, I can, nothing changed: Same password as 10 years ago...
Carlos
2009/7/15 Bill Naumuk <naumuk@windstream.net>
> Carlos-
> Can you still get on? I can't with the passwords, etc. I've used for
> years.
>
> Bill
>
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Aviation nuts, bolts, washers & cotter keys |
Clyde,
-
I would be pleased to see such a list when you have compiled it.
-
Thanks,
-
Elden Jacobson
xl/3300- Do not archive
--- On Thu, 7/16/09, Clyde Barcus <barcusc@comcast.net> wrote:
From: Clyde Barcus <barcusc@comcast.net>
Subject: Zenith-List: Aviation nuts, bolts, washers & cotter keys
Gentlemen
-
I purchased a huge amount (At least it is to me) of aviation nuts, bolts, w
ashers, etc at an estate sale. The gentlemen was an A&P and had a very larg
e assortment of fasteners, I made a deal with his brother for all of it, un
fortunately his brother was aware of it value but I still managed to pay a
reasonable price. I plan on taking what I need and selling the rest, I don'
t know for sure at this time but I am certain it will be less than half pri
ce for the rest which will be quite a lot. I didn't buy this to make money,
I just could not pass it up. I will sell it in small quanties or the whole
lot, let me know if you have interest and I will send a list as soon as I
have one.
-
Regards
-
Clyde
601XL
barcusc@comcast.net
=0A=0A=0A
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Aviation nuts, bolts, washers & cotter keys |
Count me in also Clyde.
do not archive
--------
Ron Lendon, Clinton Township, MI
WW Corvair with Roy's Garage 5th bearing
Zodiac XL, ScrapBuilder ;-)
http://www.mykitlog.com/rlendon
Corvair Engine Prints:
http://home.comcast.net/~rlendon/site/
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=253241#253241
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | New local homebuilder |
All-
Just shot this lousy picture of the backyard through the screen
window in the kitchen. That's a bona fide Pennsylvania wild turkey hen,
and the arrows point to some of the poults, who are little brown
fluffballs about as big as your fist.
do not archive
Bill Naumuk
Townville, Pa.
HDS N601MG/Corvair 95%
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for drawing - forward tilt canopy parts on |
fuselag
All-
Hmph, I just got on. Must have been a temporary glitch.
Bill
do not archive
----- Original Message -----
From: "Gig Giacona" <wrgiacona@gmail.com>
Sent: Wednesday, July 15, 2009 2:58 PM
Subject: Zenith-List: Re: Looking for drawing - forward tilt canopy parts on
fuselag
>
>
> naumuk(at)windstream.net wrote:
>> Carlos-
>> Can you still get on? I can't with the passwords, etc. I've used
>> for years.
>>
>> Bill
>>
>
>
> I can with the same generic password that has been in place since at least
> 2002.
>
> --------
> W.R. "Gig" Giacona
> 601XL Under Construction
> See my progress at www.peoamerica.net/N601WR
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=253197#253197
>
>
>
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New local homebuilder |
Are they airworthy?
2009/7/15 Bill Naumuk <naumuk@windstream.net>
> All-
> Just shot this lousy picture of the backyard through the screen window
> in the kitchen. That's a bona fide Pennsylvania wild turkey hen, and the
> arrows point to some of the poults, who are little brown fluffballs about as
> big as your fist.
> do not archive
> Bill Naumuk
> Townville, Pa.
> HDS N601MG/Corvair 95%
>
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Looking for drawing - forward tilt canopy parts on fuselage |
When I built my forward tilting canopy for my 601HD I used those
drawings from Zenith. I must caution you though if they haven't been
changed the dimensions on the parts don't add up. By that I mean there
are deliberate errors in the dimensions. I say deliberate because CAD
programs will not make a dimensioning error, you have to edit it in
afterward. That said I was able to build my parts after working out some
of the dimensions.
Tim Shankland
eedetail wrote:
>
>Looking for a drawing and parts list, fitting up a forward tilting canopy to a
601HD. I've got the canopy, just looking for the hinge assy's, block for mounting
gas struts and instrument panel cover.
>TimE
>
>
>Read this topic online here:
>
>http://forums.matronics.com/viewtopic.php?p=253164#253164
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|