---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Tue 09/15/09: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:49 AM - question (Ralph Flick) 2. 09:11 AM - Re: 601XL Rotax 912 parts (Tommy Walker) 3. 09:11 AM - Open House - Aeromax (william Clapp) 4. 05:16 PM - MacMaster-Carr (Carlos Sa) 5. 05:47 PM - Re: MacMaster-Carr (Paul Mulwitz) 6. 06:04 PM - Re: MacMaster-Carr (Carlos Sa) 7. 06:21 PM - Re: MacMaster-Carr (Paul Mulwitz) 8. 06:22 PM - Flanging Dies for 701 () ________________________________ Message 1 _____________________________________ Time: 06:49:35 AM PST US From: "Ralph Flick" Subject: Zenith-List: question can anyone flying a 601hd or hds with a corvair eng tell me how far to set the eng mt from firewall when useing the header tank set up ? conserned about w&bal. thanks ralph 601 hds 80% built ________________________________ Message 2 _____________________________________ Time: 09:11:15 AM PST US Subject: Zenith-List: Re: 601XL Rotax 912 parts From: "Tommy Walker" Hi, I thought I had the 912ULS muffler for the Zenith Bed Mount sold but the buyer did not buy the 601 project he was looking at. I sold the air box, but the muffler is still available. Stainless steel and in good shape. $200.00 Plus shipping. Someone else made an offer, but I lost their email address. If you are still interested, I can send it to you. twalker@cableone.net -------- Tommy Walker N8701 - Anniston, AL Read this topic online here: http://forums.matronics.com/viewtopic.php?p=263152#263152 ________________________________ Message 3 _____________________________________ Time: 09:11:36 AM PST US From: william Clapp Subject: Zenith-List: Open House - Aeromax If the weather-cooperates and-all goes well I should be showing up at t he Zenith Open House in Mexico MO on Saturday the 19th.--- I plan to show our 100IFB engine (in my KR2S)-and a IFB display for those intereste d.-- We have just completed our 601/650/750 cowling molds and can produ ce those parts.-- This completes our components for the 601 FWF kit.- - We now have 100IFB and 100 engines and parts available.---Individ ual parts and components for the FWF are also coming online.-- The Zeni th parts took us a little longer to-get online since we we focusing on th e-Sonex FWF kits.-(currently available and were seen at Oshkosh).-- - We hope to be able to see many friends and new faces, answer questions and have a-good time.-- If you havent been to a Zenith Open House bef ore, I recommend it.-- It is a good solid company and has good products .- Hope to see you there.-- Bill=0A-=0ABill Clapp - Aeromax Aviatio n Manager=0A-KR2S builder and pilot =0AValdosta, GA=0Aaeromaxaviation.com -/ billclapp.com=0A=0A=0A ________________________________ Message 4 _____________________________________ Time: 05:16:02 PM PST US Subject: Zenith-List: MacMaster-Carr From: Carlos Sa Warning for those living North of the border: After having placed an order last night, and having it confirmed by email, I just received a note from MacMaster, stating that "due to the ever increasing complexity of United States export regulations, McMaster-Carr will only process orders from a few long-established customers in Canada." They could have placed a notice on the web site, but they let your order go through, confirm it, and only then they check your address. Aggravating. What's worse, I don't think there is comparable source of tools and materials... Or is there? Carlos Montreal, Canada ________________________________ Message 5 _____________________________________ Time: 05:47:57 PM PST US From: Paul Mulwitz Subject: Re: Zenith-List: MacMaster-Carr Hi Carlos, Travers Tool is a great source of cutting tools and the like. Also take a look at MSC industrual supply. Alas, McMaster is the best there is IMHO for wide assortment of materials, fasteners, etc. Paul XL awaiting engineering changes At 05:04 PM 9/15/2009, you wrote: >Warning for those living North of the border: > >After having placed an order last night, and having it confirmed by >email, I just received a note from MacMaster, stating that "due to >the ever increasing complexity of United States export regulations, >McMaster-Carr will only process orders from a few long-established >customers in Canada." > >They could have placed a notice on the web site, but they let your >order go through, confirm it, and only then they check your address. >Aggravating. > >What's worse, I don't think there is comparable source of tools and >materials... Or is there? > > >Carlos >Montreal, Canada > > ________________________________ Message 6 _____________________________________ Time: 06:04:25 PM PST US Subject: Re: Zenith-List: MacMaster-Carr From: Carlos Sa Thanks for the tip, Paul I am looking for UHMWPE bar for the HD gear slides (1"x0.25"x8" times 8). Found it in MSC, which you coincidentally suggest. Regards Carlos do not archive 2009/9/15 Paul Mulwitz > Hi Carlos, > > Travers Tool is a great source of cutting tools and the like. Also take a > look at MSC industrual supply. > > Alas, McMaster is the best there is IMHO for wide assortment of materials, > fasteners, etc. > > Paul > XL awaiting engineering changes > ________________________________ Message 7 _____________________________________ Time: 06:21:53 PM PST US From: Paul Mulwitz Subject: Re: Zenith-List: MacMaster-Carr Hi Carlos, I'm happy to recommend MSC. I've received excellent service from them on many occasions. I usually buy cutting tools (like hand reamers) from them. They have many warehouses, but I don't know how close any of them are to Montreal. I live on the other side of the world. Paul At 06:00 PM 9/15/2009, you wrote: >Thanks for the tip, Paul > > >I am looking for UHMWPE bar for the HD gear slides (1"x0.25"x8" times 8). >Found it in MSC, which you coincidentally suggest. > >Regards >Carlos ________________________________ Message 8 _____________________________________ Time: 06:22:14 PM PST US From: Subject: Zenith-List: Flanging Dies for 701 I have all my metal cut so I am now looking for flanging dies. Is there a rental set or does someone have a set for sell or rent or loan? Thanks David M. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.