---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Fri 09/25/09: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:05 AM - Re: Aviation nuts, bolts, washers & cotter keys (Clyde Barcus) 2. 02:40 PM - Noise level of the Rotax 912S powered 701 STOL. (Gary Gower) 3. 03:42 PM - IE compression (Bill Naumuk) 4. 04:04 PM - Re: IE compression (Craig Payne) 5. 07:42 PM - centre wing measurement check (601-HD(S) ) (Carlos Sa) ________________________________ Message 1 _____________________________________ Time: 10:05:55 AM PST US From: "Clyde Barcus" Subject: Re: Zenith-List: Aviation nuts, bolts, washers & cotter keys Hi Elden: I finally got some time to work on sorting the aviation hardware bought, so far I have 3,827 AN4H-5A, I have various sizes from AN3 up to AN8 but not in the high quanity of the AN4, in most cases 100 to 300 but I have a long way to go. I have nuts in the thousands including tension,I also have some close tolerance and high shear bolts. The price will be roughly one third of retail, let me know if you still have interest. You and three others who responded will have first opportunity before I try to sell whatever is left, of course, after I determine what to keep for myself. Regards Clyde Barcus ----- Original Message ----- From: Elden Jacobson To: zenith-list@matronics.com Sent: Wednesday, July 15, 2009 3:57 PM Subject: Re: Zenith-List: Aviation nuts, bolts, washers & cotter keys Clyde, I would be pleased to see such a list when you have compiled it. Thanks, Elden Jacobson xl/3300 Do not archive --- On Thu, 7/16/09, Clyde Barcus wrote: From: Clyde Barcus Subject: Zenith-List: Aviation nuts, bolts, washers & cotter keys To: zenith-list@matronics.com Date: Thursday, July 16, 2009, 3:04 AM Gentlemen I purchased a huge amount (At least it is to me) of aviation nuts, bolts, washers, etc at an estate sale. The gentlemen was an A&P and had a very large assortment of fasteners, I made a deal with his brother for all of it, unfortunately his brother was aware of it value but I still managed to pay a reasonable price. I plan on taking what I need and selling the rest, I don't know for sure at this time but I am certain it will be less than half price for the rest which will be quite a lot. I didn't buy this to make money, I just could not pass it up. I will sell it in small quanties or the whole lot, let me know if you have interest and I will send a list as soon as I have one. Regards Clyde 601XL barcusc@comcast.net el=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith-List et=_blank>http://forums.matronics.com llow target=_blank>http://www.matronics.com/contribution ________________________________ Message 2 _____________________________________ Time: 02:40:10 PM PST US From: Gary Gower Subject: Zenith-List: Noise level of the Rotax 912S powered 701 STOL. Hello List. - Some one could advise me where I can-get an Official data (scanned paper) - about the noise level of the 701 engine?- - Probably some owner in Europe... - I will appreciate very much your help.-- - Saludos Gary Gower Flying from Chapala, Mexico. 701 912S- 263 hrs 601 XL- Jab 3300- working on wings. Bourocrats....- :-( -=0A=0A=0A ________________________________ Message 3 _____________________________________ Time: 03:42:20 PM PST US From: "Bill Naumuk" Subject: Zenith-List: IE compression All- This has nothing to do with the list, but does anyone know what file IE periodically sends your messages to when it compresses them? I have a ton of information I can't find. do not archive Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% ________________________________ Message 4 _____________________________________ Time: 04:04:19 PM PST US From: "Craig Payne" Subject: RE: Zenith-List: IE compression IE as in Internet Explorer the web browser? Are you thinking of the Outlook or Outlook Express e-mail clients? -- Craig From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Bill Naumuk Sent: Friday, September 25, 2009 4:42 PM Subject: Zenith-List: IE compression All- This has nothing to do with the list, but does anyone know what file IE periodically sends your messages to when it compresses them? I have a ton of information I can't find. do not archive Bill Naumuk Townville, Pa. HDS N601MG/Corvair 95% ________________________________ Message 5 _____________________________________ Time: 07:42:12 PM PST US Subject: Zenith-List: centre wing measurement check (601-HD(S) ) From: Carlos Sa Hello, all I am ready to drill the "rear bearing assembly" 6V12-2 to the "rear bearing channel" 6V12-6, but I suspect something is not right: To have the torque tube 6V13-3 perfectly horizontal, the overlap between 6V12-2 and 6V12-6 needs to be 25 mm, while the plans show 19 mm. In addition to that, the channel 6V13-4 is too short to be installed diagonally, as per plans. It fits perfectly if assembled the way Jeff Small ( http://mthobby.pcperfect.com/ch601/ch601prjjs.htm ) and Michel Therrien ( http://mthobby.pcperfect.com/ch601/chcontrols3.htm ) did. I'll probably use the same approach, but that's beside the point - it bothers me that things are looking so out of whack. So far I have managed to assemble everything with little deviation from plans (1 or 2 mm in large assemblies); this is the first real "disagreement" between plans and reality (or at least my version of reality). Could someone measure and post the following: Distance between the bottom of the torque tube's horn (the part that attaches to the aileron cables) and the bottom skin, i.e., the clearance between that part and the skin. It should be in the 20 mm range; I have ~17 mm. Overlap between 6V12-2 and 6V12-6 - the plans say 19 mm, I have 25 mm. Distance between 6V12-6 and 6V12-5 (this would be the length of the U channel 6V13-4 if it were installed parallel to the fuselage axis). I have 385 mm. I know this can be a pain to measure, but it would reassure me and allow me to do some work this weekend (or not...). Thanks much, and have a good weekend. Carlos Ch601-HD, plans - one puzzle at a time Montreal, Canada ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.