Zenith-List Digest Archive

Tue 06/08/10


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 06:03 AM - Re: Center Spar Upgrade Question (dgardea(at)gmail.com)
     2. 09:43 AM - Spare parts source (Larry McFarland)
     3. 05:13 PM - Re: Historic Zenair Zipper for sale (kmccune)
     4. 05:31 PM - Re: Re: Historic Zenair Zipper for sale (David Mikesell)
     5. 05:47 PM - Re: Historic Zenair Zipper for sale (kmccune)
     6. 06:36 PM - Re: Re: Historic Zenair Zipper for sale (David Mikesell)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:03:30 AM PST US
    Subject: Re: Center Spar Upgrade Question
    From: "dgardea(at)gmail.com" <dgardea@gmail.com>
    Larry, I did the same exact thing .. I had backdrilled the top doubler following the directions from Zenith. I ordered three new parts yesterday: both top doublers and the forward bottom doubler. All will cost you about $50. Dave -------- Dave Gardea 601XL - Corvair working on wiring panel and upgrade kit http://home.comcast.net/~davegardea/ Read this topic online here: http://forums.matronics.com/viewtopic.php?p=300506#300506


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:43:10 AM PST US
    From: Larry McFarland <larry@macsmachine.com>
    Subject: Spare parts source
    Hi guys, For you who fly behind the Stratus Subaru or just do dual ignition on one of the varieties, Ive been revisiting my engine wiring and found my ignition coil plates are rusty from the moist air coming thru the cowl. Having spares has real merit because spare parts are often discontinued after 10 years or so. Ignition coils purchased nearly 8years ago for $35.00 each are now $93.00. Useful alternatives to the pricey Echlin IC107 coils can be found by searching for coils used on a 1987-1990 Mitsubishi wagon or van. The equivalent parts are easier to find at $30.00 and up. I chose ORiellys Auto Parts on line and they have 4 sources for this coil. Ive maintained a spares box for all things consumable, brake pads, bungees, fuel lines, scat tube etc, and after only 157 hours of flight, I guess coils are next. Fly safe guys, Larry McFarland Zenith 601HDS at www.macsmachine.com


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:13:23 PM PST US
    Subject: Re: Historic Zenair Zipper for sale
    From: "kmccune" <kmccune@somtel.net>
    I know this is an old thread, but does anyone know what became of the Zipper? I mean real part 103! Heck If I had seen this thing 3 years ago I'd have found one and I'd be building a 601 instead of a 701! Well not really, maybe a Buttercup, I really am kind of a high wing guy. Kevin -------- &quot;Real freedom is the sustained act of being an individual.&quot; WW - 2009 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=300614#300614


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:31:55 PM PST US
    From: "David Mikesell" <skyguynca@skyguynca.com>
    Subject: Re: Historic Zenair Zipper for sale
    I have one in my hangar and doing a restoration on it. You can go to my Yahoo group I started for other Zipper owners or wanna be owners. Not a lot going on there yet but expect a lot of pictures and stories on the project. http://groups.yahoo.com/group/zenairzipper/ David M. -----Original Message----- From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of kmccune Sent: Tuesday, June 08, 2010 5:13 PM Subject: Zenith-List: Re: Historic Zenair Zipper for sale I know this is an old thread, but does anyone know what became of the Zipper? I mean real part 103! Heck If I had seen this thing 3 years ago I'd have found one and I'd be building a 601 instead of a 701! Well not really, maybe a Buttercup, I really am kind of a high wing guy. Kevin -------- &quot;Real freedom is the sustained act of being an individual.&quot; WW - 2009 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=300614#300614


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:47:40 PM PST US
    Subject: Re: Historic Zenair Zipper for sale
    From: "kmccune" <kmccune@somtel.net>
    Thanks, But your group is how I found out about it! It really is a cool airframe. Kevin -------- Always do what you are afraid to do. R.W. Emerson (1803-1882) &quot;Real freedom is the sustained act of being an individual.&quot; WW - 2009 &quot;Life is a good deal...it's worth it&quot; Dorothy McCune (the day she died) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=300624#300624


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:36:20 PM PST US
    From: "David Mikesell" <skyguynca@skyguynca.com>
    Subject: Re: Historic Zenair Zipper for sale
    IT is a really light plane, with the new engines out here with more power and lighter than the old Rotax 277. it will be a nice permormer. The rudder and horizontal is just like the 701, well the construction methods are identical, the airfoil on the horizontal is different but the rudder is the same as the 601 and 701 David M. -----Original Message----- From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of kmccune Sent: Tuesday, June 08, 2010 5:47 PM Subject: Zenith-List: Re: Historic Zenair Zipper for sale Thanks, But your group is how I found out about it! It really is a cool airframe. Kevin -------- Always do what you are afraid to do. R.W. Emerson (1803-1882) &quot;Real freedom is the sustained act of being an individual.&quot; WW - 2009 &quot;Life is a good deal...it's worth it&quot; Dorothy McCune (the day she died) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=300624#300624




    Other Matronics Email List Services

  • Post A New Message
  •   zenith-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Zenith-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/zenith-list
  • Browse Zenith-List Digests
  •   http://www.matronics.com/digest/zenith-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --