---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Fri 08/13/10: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:32 PM - Re: 2011 the year of the Zenith (Jeff) 2. 07:42 PM - Re: copy hole pattern? (Ron Lendon) 3. 07:58 PM - Re: Re: copy hole pattern? (Carlos Sa) 4. 08:54 PM - Re: Re: copy hole pattern? (Paul Mulwitz) 5. 09:09 PM - Re: 2011 the year of the Zenith (Bill Lanman) ________________________________ Message 1 _____________________________________ Time: 03:32:17 PM PST US From: "Jeff " Subject: RE: Zenith-List: 2011 the year of the Zenith Joe, Count me in! I will be bringing N601T next year (weather permitting). This should be a great time. If you would like, I can bring or send you the "Zenith Gathering" banner that I have used at the Winchester events. Parking with other Zenith's would be great! And yes, eating together is what pilots really do best. Jeff Davidson Warrenton, Virginia (HWY) ________________________________ Message 2 _____________________________________ Time: 07:42:39 PM PST US Subject: Zenith-List: Re: copy hole pattern? From: "Ron Lendon" carlossa52(at)gmail.com wrote: > Ron, thanks for the offer. > > > > > Do you have a picture somewhere in your kitlog? > > Carlos > Yep, Look here: http://mykitlog.com/users/display_log.php?user=rlendon&project=113&category=0&log=59265&row=431 -------- Ron Lendon, Clinton Township, MI WW Corvair with Roy's Garage 5th bearing Zodiac XL, ScrapBuilder ;-) http://www.mykitlog.com/rlendon Read this topic online here: http://forums.matronics.com/viewtopic.php?p=308740#308740 ________________________________ Message 3 _____________________________________ Time: 07:58:28 PM PST US From: Carlos Sa Subject: Re: Zenith-List: Re: copy hole pattern? So, with this thingy in place, you drill a 3/32" hole, and then enlarge it to #21 / 20 as need be ? And same principle for #30, I presume... Neat! Carlos On 13 August 2010 22:42, Ron Lendon wrote: > > > Yep, Look here: > > http://mykitlog.com/users/display_log.php?user=rlendon&project=113&category=0&log=59265&row=431 > > -------- > Ron Lendon, Clinton Township, MI > > ________________________________ Message 4 _____________________________________ Time: 08:54:11 PM PST US From: "Paul Mulwitz" Subject: RE: Zenith-List: Re: copy hole pattern? Hi Carlos, My technique is to always drill a #40 hole, then enlarge it with a #30 drill. If it needs to be larger I go next to a #20. This "Step Drilling" tends to make nice round holes. It does not, however, make the final hole exactly where the #40 hole was drilled. Some factors I don't really understand tend to make the hole wander. That is why it works best to "Line Drill" the holes when starting either with a clean sheet of metal or one with a larger hole on top. Best regards, Paul From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Carlos Sa Sent: Friday, August 13, 2010 7:57 PM Subject: Re: Zenith-List: Re: copy hole pattern? So, with this thingy in place, you drill a 3/32" hole, and then enlarge it to #21 / 20 as need be ? And same principle for #30, I presume... Neat! Carlos On 13 August 2010 22:42, Ron Lendon wrote: Yep, Look here: http://mykitlog.com/users/display_log.php?user=rlendon &project=113&category=0&log=59265&row=431 -------- Ron Lendon, Clinton Township, MI ________________________________ Message 5 _____________________________________ Time: 09:09:11 PM PST US From: "Bill Lanman" Subject: Re: Zenith-List: 2011 the year of the Zenith I will have N650WL finished by then-count me in. Sounds like fun! Bill Lanman Louisville, Ky Zodiac CH 650, Corvair power ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.