Zenith-List Digest Archive

Sun 10/17/10


Total Messages Posted: 18



Today's Message Index:
----------------------
 
     1. 06:25 AM - Chat Reminder (George Race)
     2. 06:36 AM - Webinar (Damien)
     3. 06:51 AM - Re: Webinar (Mary van der Steen)
     4. 07:11 AM - Re: Webinar (Damien)
     5. 07:35 AM - Re: Webinar (Carlos Sa)
     6. 07:49 AM - Re: Webinar (Steve Freeman)
     7. 08:11 AM - Re: Webinar (Jimbo)
     8. 08:49 AM - Re: Webinar (Carlos Sa)
     9. 09:03 AM - Re: Webinar (Jim Belcher)
    10. 09:23 AM - Re: Webinar (Ronald Steele)
    11. 09:43 AM - Re: Webinar (Me)
    12. 10:01 AM - Re: Webinar (Me)
    13. 10:38 AM - Re: Harbor Freight Riveter problems (Keith Burris)
    14. 01:43 PM - Re: Webinar (Bill Naumuk)
    15. 03:14 PM - Re: Webinar (JohnDRead@aol.com)
    16. 03:37 PM - Re: Webinar (FLYaDIVE)
    17. 03:55 PM - Re: Webinar (Carlos Sa)
    18. 10:38 PM - HDS Speed Problem (lack of) (Scotsman)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:25:27 AM PST US
    From: "George Race" <mykitairplane@mrrace.com>
    Subject: Chat Reminder
    Live Chat Room every Monday evening around 8:00 EDT http://www.mykitairplane.com <blocked::http://www.mykitairplane.com/> Click on the Chat Room link at the top of the page. George


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:36:42 AM PST US
    From: "Damien" <dgraham7@TWCNY.RR.COM>
    Subject: Webinar
    Did anyone participate in the EAA Webinar on Thursday about the future of the Zociac 650 ? I wanted to but I was out of town and did not have internet access. I would like to have played it at a later date, but it does not seem to be available. Regards, Damien 601 HDS Rotax 912


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:51:07 AM PST US
    Subject: Re: Webinar
    From: Mary van der Steen <maryvdsteen@gmail.com>
    Here it is: http://www.eaavideo.org/video.aspx?v=637647030001 enjoy 2010/10/17 Damien <dgraham7@twcny.rr.com> > Did anyone participate in the EAA Webinar on Thursday about the future > of the Zociac 650 ? I wanted to but I was out of town and did not have > internet access. > I would like to have played it at a later date, but it does not seem to be > available. > Regards, > Damien > 601 HDS > Rotax 912 > > * > > * > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:11:57 AM PST US
    From: "Damien" <dgraham7@TWCNY.RR.COM>
    Subject: Re: Webinar
    Mary: Thanks very much !!! Regards, Damien DO NOT ARCHIVE ----- Original Message ----- From: Mary van der Steen To: zenith-list@matronics.com Sent: Sunday, October 17, 2010 9:48 AM Subject: Re: Zenith-List: Webinar Here it is: http://www.eaavideo.org/video.aspx?v=637647030001 enjoy 2010/10/17 Damien <dgraham7@twcny.rr.com> Did anyone participate in the EAA Webinar on Thursday about the future of the Zociac 650 ? I wanted to but I was out of town and did not have internet access. I would like to have played it at a later date, but it does not seem to be available. Regards, Damien 601 HDS Rotax 912 arget="_blank">http://www.matronics.com/Navigator?Zenith-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:35:19 AM PST US
    From: Carlos Sa <carlossa52@gmail.com>
    Subject: Re: Webinar
    Damien, I did attend it. It consisted of an overview of the Zodiac (mostly stuff you can find on the web). They also talked about the accidents, the NTSB and the upgrade kit. Nothing new for those that have been subscribers to this list for the past 12 months. The webinar is available at the EAA webinar archives: http://www.eaavideo.org/video.aspx?v=637647030001 Carlos CH601-HD, plans do not archive On 17 October 2010 09:34, Damien <dgraham7@twcny.rr.com> wrote: > Did anyone participate in the EAA Webinar on Thursday about the future > of the Zociac 650 ? I wanted to but I was out of town and did not have > internet access. > I would like to have played it at a later date, but it does not seem to be > available. > Regards, > Damien > 601 HDS > Rotax 912 > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:49:54 AM PST US
    From: "Steve Freeman" <steve.freeman@syntaxds.com>
    Subject: Webinar
    The file will not play for me. Is anyone else having any luck with it? Thank you, Steve Freeman From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Carlos Sa Sent: Sunday, October 17, 2010 7:29 AM Subject: Re: Zenith-List: Webinar Damien, I did attend it. It consisted of an overview of the Zodiac (mostly stuff you can find on the web). They also talked about the accidents, the NTSB and the upgrade kit. Nothing new for those that have been subscribers to this list for the past 12 months. The webinar is available at the EAA webinar archives: http://www.eaavideo.org/video.aspx?v=637647030001 Carlos CH601-HD, plans do not archive On 17 October 2010 09:34, Damien <dgraham7@twcny.rr.com> wrote: Did anyone participate in the EAA Webinar on Thursday about the future of the Zociac 650 ? I wanted to but I was out of town and did not have internet access. I would like to have played it at a later date, but it does not seem to be available. Regards, Damien 601 HDS Rotax 912


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:11:44 AM PST US
    From: Jimbo <jimandmandy@yahoo.com>
    Subject: Webinar
    It plays fine on Firefox 3 with Adobe Flash player 10. --- On Sun, 10/17/10, Steve Freeman <steve.freeman@syntaxds.com> wrote: From: Steve Freeman <steve.freeman@syntaxds.com> Subject: RE: Zenith-List: Webinar =0A=0A=0A =0A =0A=0A=0A=0A=0A=0A=0AThe file will not play for me.- Is any one else having any luck=0Awith it? =0A=0A - =0A=0AThank you, =0A=0A- =0A=0ASteve Freeman =0A=0A - =0A=0A=0A=0AFrom:=0Aowner-zenith-list-server @matronics.com=0A[mailto:owner-zenith-list-server@matronics.com] On Behalf Of Carlos Sa =0ASent: Sunday, October 17, 2010 7:29 AM =0ATo: zenith-list@matronics.com =0ASubject: Re: Zenith-List: Webinar =0A=0A=0A=0A - =0A=0ADamien, I did a ttend it. =0A =0A =0AIt consisted of an overview of the Zodiac (mostly stuff you can find on the=0Aweb). =0AThey also talked about the accidents, the NTSB and the upgrade kit. =0ANothing new for those that have been subscribers to this list for the pa st 12=0Amonths. =0A =0AThe webinar is available at the EAA webinar archives: http://www.eaavide o.org/video.aspx?v=637647030001 =0ACarlos =0ACH601-HD, plans =0A =0Ado not archive =0A=0A=0A=0AOn 17 October 2010 09:34, Damien <dgraham7@t wcny.rr.com> wrote: =0A=0A=0A=0A=0A=0ADid=0Aanyone participate in the EAA -Webinar on Thursday about the- future=0Aof the Zociac 650 ? I wanted t o but I was out of town and did not have internet=0Aaccess. =0A=0A=0A=0A=0A =0AI=0Awould like to have played it at a later date, but it does not seem t o be=0Aavailable. =0A=0A=0A=0A=0A=0ARegards, =0A=0A=0A=0A=0A=0ADamien =0A =0A=0A=0A=0A=0A601=0AHDS =0A=0A=0A=0A=0A=0ARotax=0A912 =0A=0A=0A=0A - =0A =0A=0A=0A=0A=0A - =0A=0A - -http://www.matronics.com/Navigator?Zenith -Listhttp://forums.matronics.comhttp://www.matronics.com/contribution - =========================0A =0A


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:49:59 AM PST US
    From: Carlos Sa <carlossa52@gmail.com>
    Subject: Re: Webinar
    It plays on Safari, Chrome and Firefox... On 17 October 2010 11:09, Jimbo <jimandmandy@yahoo.com> wrote: > It plays fine on Firefox 3 with Adobe Flash player 10. > > > --- On *Sun, 10/17/10, Steve Freeman <steve.freeman@syntaxds.com>* wrote: > > > From: Steve Freeman <steve.freeman@syntaxds.com> > Subject: RE: Zenith-List: Webinar > To: zenith-list@matronics.com > Date: Sunday, October 17, 2010, 7:47 AM > > The file will not play for me. Is anyone else having any luck with it? > > > Thank you, > > > Steve Freeman > >


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:03:59 AM PST US
    From: Jim Belcher <Z601d@anemicaardvark.com>
    Subject: Re: Webinar
    I suspect the problem is that it's encoded in Flash. Unless you hold your tongue just right while you pat your head, some computers don't like Flash. :-) On Sunday 17 October 2010 10:46:15 you wrote: > It plays on Safari, Chrome and Firefox... > > On 17 October 2010 11:09, Jimbo <jimandmandy@yahoo.com> wrote: > > It plays fine on Firefox 3 with Adobe Flash player 10. > > > > > > --- On *Sun, 10/17/10, Steve Freeman <steve.freeman@syntaxds.com>* wrote: > > > > > > From: Steve Freeman <steve.freeman@syntaxds.com> > > Subject: RE: Zenith-List: Webinar > > To: zenith-list@matronics.com > > Date: Sunday, October 17, 2010, 7:47 AM > > > > The file will not play for me. Is anyone else having any luck with it? > > > > Thank you, > > > > > > > > Steve Freeman -- ======================================= Jim B. Belcher BS,MS Physics, Math, Computer Science A&P/IA General Radio Telephone Certificate Instrument Rated Pilot Retired Aerospace Technical Manager =======================================


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:23:57 AM PST US
    From: Ronald Steele <rsteele@rjsit.com>
    Subject: Re: Webinar
    The only nuggets are that over half of zodiacs flying are outside the US. and there are believed to be over a 1000 of them. The new 650 plans with the upgrades included are available, and all 650 kits now come with the upgrade installed. The 650 upgraded plans are supposedly available for a nominal fee. If they are on the web site, I haven't found them yet. I think the big news is that they actually had the event. Shows some support for the plane. Ron On Oct 17, 2010, at 10:28 AM, Carlos Sa wrote: > Damien, I did attend it. > > > It consisted of an overview of the Zodiac (mostly stuff you can find > on the web). > They also talked about the accidents, the NTSB and the upgrade kit. > Nothing new for those that have been subscribers to this list for > the past 12 months. > > The webinar is available at the EAA webinar archives: http://www.eaavideo.org/video.aspx?v=637647030001 > Carlos > CH601-HD, plans > > do not archive > > On 17 October 2010 09:34, Damien <dgraham7@twcny.rr.com> wrote: > Did anyone participate in the EAA Webinar on Thursday about the > future of the Zociac 650 ? I wanted to but I was out of town and did > not have internet access. > I would like to have played it at a later date, but it does not seem > to be available. > Regards, > Damien > 601 HDS > Rotax 912 > >


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:43:30 AM PST US
    From: Me <steve.freeman@syntaxds.com>
    Subject: Re: Webinar
    I have received the 650B plans and I have been assured that when the spars are shipped they are built to the new standards. Thank you, Steve Freeman This message was sent from my mobile device. Please forgive the brevity and any typing errors. -----Original message----- From: Ronald Steele <rsteele@rjsit.com> Sent: Sun, Oct 17, 2010 16:21:07 GMT+00:00 Subject: Re: Zenith-List: Webinar The only nuggets are that over half of zodiacs flying are outside the US. and there are believed to be over a 1000 of them. The new 650 plans with the upgrades included are available, and all 650 kits now come with the upgrade installed. The 650 upgraded plans are supposedly available for a nominal fee. If they are on the web site, I haven't found them yet. I think the big news is that they actually had the event. Shows some support for the plane. Ron On Oct 17, 2010, at 10:28 AM, Carlos Sa wrote: > Damien, I did attend it. > > > It consisted of an overview of the Zodiac (mostly stuff you can find > on the web). > They also talked about the accidents, the NTSB and the upgrade kit. > Nothing new for those that have been subscribers to this list for > the past 12 months. > > The webinar is available at the EAA webinar archives: http://www.eaavideo.org/video.aspx?v=637647030001 > Carlos > CH601-HD, plans > > do not archive > > On 17 October 2010 09:34, Damien <dgraham7@twcny.rr.com> wrote: > Did anyone participate in the EAA Webinar on Thursday about the > future of the Zociac 650 ? I wanted to but I was out of town and did > not have internet access. > I would like to have played it at a later date, but it does not seem > to be available. > Regards, > Damien > 601 HDS > Rotax 912 > >


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:01:48 AM PST US
    From: Me <steve.freeman@syntaxds.com>
    Subject: Re: Webinar
    Flash is not normally an issue and I can't believe it won't play in IE8 but stranger things have certainly happened. I have been the presenter in this type of goto meeting on several occasions and never had a problem before. Thank you, Steve Freeman This message was sent from my mobile device. Please forgive the brevity and any typing errors. -----Original message----- From: Jim Belcher <Z601d@anemicaardvark.com> Sent: Sun, Oct 17, 2010 16:00:13 GMT+00:00 Subject: Re: Zenith-List: Webinar I suspect the problem is that it's encoded in Flash. Unless you hold your tongue just right while you pat your head, some computers don't like Flash. :-) On Sunday 17 October 2010 10:46:15 you wrote: > It plays on Safari, Chrome and Firefox... > > On 17 October 2010 11:09, Jimbo <jimandmandy@yahoo.com> wrote: > > It plays fine on Firefox 3 with Adobe Flash player 10. > > > > > > --- On *Sun, 10/17/10, Steve Freeman <steve.freeman@syntaxds.com>* wrote: > > > > > > From: Steve Freeman <steve.freeman@syntaxds.com> > > Subject: RE: Zenith-List: Webinar > > To: zenith-list@matronics.com > > Date: Sunday, October 17, 2010, 7:47 AM > > > > The file will not play for me. Is anyone else having any luck with it? > > > > Thank you, > > > > > > > > Steve Freeman -- ======================================= Jim B. Belcher BS,MS Physics, Math, Computer Science A&P/IA General Radio Telephone Certificate Instrument Rated Pilot Retired Aerospace Technical Manager =======================================


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:38:12 AM PST US
    From: "Keith Burris" <klburris@frontiernet.net>
    Subject: RE: Harbor Freight Riveter problems
    Hey guys; Thanks for all the replies. The knowledge here is great. -- Keith


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:43:12 PM PST US
    From: "Bill Naumuk" <naumuk@windstream.net>
    Subject: Re: Webinar
    My antivirus had to have its database updated before I could log on. Perhaps this is your problem. There seem to be lots of new viruses out there. Bill ----- Original Message ----- From: Steve Freeman To: zenith-list@matronics.com Sent: Sunday, October 17, 2010 10:47 AM Subject: RE: Zenith-List: Webinar The file will not play for me. Is anyone else having any luck with it? Thank you, Steve Freeman From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Carlos Sa Sent: Sunday, October 17, 2010 7:29 AM To: zenith-list@matronics.com Subject: Re: Zenith-List: Webinar Damien, I did attend it. It consisted of an overview of the Zodiac (mostly stuff you can find on the web). They also talked about the accidents, the NTSB and the upgrade kit. Nothing new for those that have been subscribers to this list for the past 12 months. The webinar is available at the EAA webinar archives: http://www.eaavideo.org/video.aspx?v=637647030001 Carlos CH601-HD, plans do not archive On 17 October 2010 09:34, Damien <dgraham7@twcny.rr.com> wrote: Did anyone participate in the EAA Webinar on Thursday about the future of the Zociac 650 ? I wanted to but I was out of town and did not have internet access. I would like to have played it at a later date, but it does not seem to be available. Regards, Damien 601 HDS Rotax 912 http://www.matronics.com/Navigator?Zenith-Listhttp://forums.matronics.com http://www.matronics.com/contribution


    Message 15


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:14:07 PM PST US
    From: JohnDRead@aol.com
    Subject: Re: Webinar
    The webinar ran fine on Windows 7. The slides were fuzzy though. Do not archive Regards, John CH701 - Colorado - Jabiru 3300 Cell: 719-494-4567 Home: 303-648-3261


    Message 16


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:37:02 PM PST US
    Subject: Re: Webinar
    From: FLYaDIVE <flyadive@gmail.com>
    Carlos: There are a couple of glitches in the file itself. The EAA does not identify what the glitches are but that they exist. But, GOOGLE CHROME runs them OK. Barry On Sun, Oct 17, 2010 at 11:46 AM, Carlos Sa <carlossa52@gmail.com> wrote: > It plays on Safari, Chrome and Firefox... > > > On 17 October 2010 11:09, Jimbo <jimandmandy@yahoo.com> wrote: > >> It plays fine on Firefox 3 with Adobe Flash player 10. >> >> >> --- On *Sun, 10/17/10, Steve Freeman <steve.freeman@syntaxds.com>* wrote: >> >> >> From: Steve Freeman <steve.freeman@syntaxds.com> >> Subject: RE: Zenith-List: Webinar >> To: zenith-list@matronics.com >> Date: Sunday, October 17, 2010, 7:47 AM >> >> The file will not play for me. Is anyone else having any luck with it? >> >> >> >> Thank you, >> >> >> >> Steve Freeman >> >> > * > > > * > > -- Barry "Chop'd Liver"


    Message 17


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:55:21 PM PST US
    From: Carlos Sa <carlossa52@gmail.com>
    Subject: Re: Webinar
    Yes, I saw that note. I thought they were referring to the fact that (1) one of the presenters could not get his slides going and (2) later, the presenter lost contact for a few moments. But they could very well be referring to playback issues, indeed. Carlos On 17 October 2010 18:31, FLYaDIVE <flyadive@gmail.com> wrote: > Carlos: > > There are a couple of glitches in the file itself. The EAA does not > identify what the glitches are but that they exist. > > But, GOOGLE CHROME runs them OK. > > Barry >


    Message 18


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:38:40 PM PST US
    Subject: HDS Speed Problem (lack of)
    From: "Scotsman" <jaroberts@bdo.co.za>
    Quick question to the list and especially for anyone with an HDS operating on 100 hp. A friend of mine in South Africa is having difficulties getting anywhere near the advertised speeds for the HDS on the Zodiac website (135 mph cruise). Has anyone else had similar difficulties and if not: - What prop are you running - What hp is your engine - What pitch is it set at - What is your empty weight - What speed to you achieve at sea level with full throttle - straight and level And to anyone else on the list if you have any recommendations for trouble shooting please send them through. Any help would be appreciated. James PS. I will send though a picture of th aircraft shortly but the owner has recently changed prop to see if that will fix the problem and has the spats (wheel fairings) on the aircraft. PPS. He also says that the sink rate is very high when practicing engine failures...any comments? -------- Cell +27 83 675 0815 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=316128#316128




    Other Matronics Email List Services

  • Post A New Message
  •   zenith-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Zenith-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/zenith-list
  • Browse Zenith-List Digests
  •   http://www.matronics.com/digest/zenith-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --