---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Sun 10/24/10: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:03 AM - cabin heat box (601corvair) 2. 06:10 AM - Chat Reminder (George Race) 3. 03:38 PM - Re: Re: counterweight (Terry Phillips) 4. 07:08 PM - Lycoming install (Dave New) 5. 08:41 PM - Re: Lycoming install (Steve Freeman) ________________________________ Message 1 _____________________________________ Time: 05:03:08 AM PST US From: 601corvair Subject: Zenith-List: cabin heat box If any of you folks need a cabin heat box I recommend you check out the link below. http://www.robbinswings.com/index.htm The fellow has a Mom and Pop operation, made in the USA quality products. Lightweight anodized aluminum. If you are getting near the end of a build and want to save some time, it might be worth it. Its a cash (check in the mail business) and they are very easy to work with. My part was in the mail the day the check cleared. Nice folks. regards. phill hartig ________________________________ Message 2 _____________________________________ Time: 06:10:38 AM PST US From: "George Race" Subject: Zenith-List: Chat Reminder Live Chat Room every Monday evening around 8:00 EDT http://www.mykitairplane.com Click on the Chat Room link at the top of the page. George ________________________________ Message 3 _____________________________________ Time: 03:38:36 PM PST US From: Terry Phillips Subject: Re: Zenith-List: Re: counterweight Jeff I cannot find your post with the photos of the hinge less conversion. Could you post them again? Thanks. Terry At 01:29 AM 4/29/2010 -0400, you wrote: >I have done 4 of these now and if you try and make it fit while it is held >in place with cleco's it won't be the same once riveted. the tightening of >the hinge to the rear spar changes the angle of the aileron and if it is >set at 97 degrees it will give you about 1/2 of an inch clearance once >rigged and the most important thing to do is set the deflection properly >11.5 +/- 1 degree. I set my new ribs 227 mm and not the 327 called for in >the plans and that gives good clearance at the tips. I don't agree with >the hinge less ailerons having counter weights so all my ailerons are >converted to hinged. And you can still pull the pin and test fit the >aileron counterweight arm as it will be and not just held with cleco's. > >I have also taken some pictures of the hinge less conversion and will post >them soon. > >Jeff > Terry Phillips ttp44~at~rkymtn.net Corvallis MT ZU-601XL/Jab 3300 s .. l .. o .. o .. w build kit - Tail & flaps are done; Upgrading wings & ailerons per the AMD Safety Directive http://www.mykitlog.com/N47TP/ ________________________________ Message 4 _____________________________________ Time: 07:08:38 PM PST US Subject: Zenith-List: Lycoming install From: "Dave New" List Does anybody know of any body putting a Lycoming 0235 in a 601HDS (not a XL) if so I would be interested in hearing from. I have just obtained an 0235 to replace the EA81 SUB in my plane. I think I can get the Lyc installed at the same weight or liter, just wondering if anybody else has done this. Thanks Dave New 601 HDS taildragger N148DN ________________________________ Message 5 _____________________________________ Time: 08:41:57 PM PST US From: "Steve Freeman" Subject: RE: Zenith-List: Lycoming install Just out of curiosity.why are you making this change? Thank you, Steve Freeman From: owner-zenith-list-server@matronics.com [mailto:owner-zenith-list-server@matronics.com] On Behalf Of Dave New Sent: Sunday, October 24, 2010 7:02 PM Subject: Zenith-List: Lycoming install List Does anybody know of any body putting a Lycoming 0235 in a 601HDS (not a XL) if so I would be interested in hearing from. I have just obtained an 0235 to replace the EA81 SUB in my plane. I think I can get the Lyc installed at the same weight or liter, just wondering if anybody else has done this. Thanks Dave New 601 HDS taildragger N148DN ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.