Today's Message Index:
----------------------
1. 04:17 AM - Wings CH701 (MacDonald Doug)
2. 09:52 AM - 701 Kit for sale (hart701@charter.net)
3. 10:16 AM - Jabiru Engine Seminar in New England - Last Call (Pete Krotje)
4. 05:05 PM - chat tonight (leinad)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
John, =0A-=0AI built four free standing uprights out of 2X4 that were app
roximately the right height.- Two shorter ones for the roots and two tall
er ones for the tips.- They are essentially two uprights with a top and b
ottom cross piece with a "T" at the bottom of the uprights to that they sta
nd up on their own.- The trick is to make the uprights about two inches s
horter than you think you will need and then use padding and blocking to fi
ne tune the height before drilling.=0A-=0AHope my description helps as I
am away from home-due to-work and therefore can't give you any pictures
.=0A-=0ADoug MacDonald=0ACH-701 from scratch=0ANW Ontario, Canada=0A-
=0ADo Not Archive=0A-=0A-=0ATime: 08:31:48 PM PST US=0AFrom: JohnDRead@
aol.com=0ASubject: Zenith-List: Wings CH701=0A=0AHello list,=0A- - -
- - - - - I- am about to install the wings on my CH701 and woul
d like =0Ato know from other- builders how they held the wings in place i
n the =0Acorrect location while drilling- the attachment bolt holes. =0A
=0ARegards,- John=0A=0ACH701 - Colorado - Jabiru 3300
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | 701 Kit for sale |
My Zenith 701 airframe kit is for sale due to health concerns. The tail
feathers are completed and the right wing with flaperons is covered. The
left wing is almost ready for cover--it needs wing tank and wingtip skin
installed before disassembly, debur and riveting . I have many
construction photos. and will include some tools and jigs that I have
made and a lot of clecos. I was not planning on wiring the wings for
lights, but have PVC tube running through the wing to facilitate future
wiring. I also have some of the Croke construction videos. The selling
price will be what I paid Zenith for the kit. This is approximately
$1,000 less than what a new kit costs today and a lot of the work is
completed giving the new owner a good jump-start. Buying a kit at this
stage should allow the new owner to get their repairman certificate (by
completing 51% of the aircraft.)
The kit price of $13,725 included: Airframe kit & finishing kit, bubble
door option, electric trim, metric tape measure, drill bits, 4
handiclamps, rivet spacing fan, 8 inch file and edge marker block. I
will also include a rivet gun, hand riveter, jigs that I have made and
extra clecos (you can never have too many.) I have a large compressor
that I will sell at a much-reduced price. Please respond to me off list
at: hart701@charter.net
Rich Hartwig
Waunakee WI
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Jabiru Engine Seminar in New England - Last Call |
Jabiru USA will be holding a Jabiru Engine Maintenance and Rebuild Seminar at Great
Barrington MA on Friday Sept 16 through Sunday Sept. 18. The class runs
noon Friday through Noon Sunday and is limited to 25 students. The class roster
will be firmed up before the Labor Day weekend. Anyone interested in attending
should send in the registration for before then.
Info, syllabus and registration form are posted at www.usjabiru.com. Please see that web site for more details.
Pete Krotje
Jabiru USA Sport Aircraft, LLC
931-680-2800
www.usjabiru.com
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Anyone interested in live chat tonight, here's the address:
http://www.mykitairplane.com/chat/
--------
Scratch building XL with Corvair Engine
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=350270#350270
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|