Today's Message Index:
----------------------
1. 10:06 AM - Re: Zenith-List Digest: 7 Msgs - 10/03/11 (Missy)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Zenith-List Digest: 7 Msgs - 10/03/11 |
[quote="slandwcmitch(at)yahoo.com"]William is deceased & we would like to retain
this email but be deleted from these mailings. How do we go about doing that?
Mitchell family
From: Zenith-List Digest Server
Sent: Tuesday, October 4, 2011 12:00 AM
Subject: Zenith-List Digest: 7 Msgs - 10/03/11
*No this William Clapp is NOT deceased. I spoke to him the other day. He promised
he would send me his payment. This one resides and has a business in Valdosta,
GA. His daughters name is Elaine.
========================
Online Versions of Today's List Digest Archive
========================
Today's complete Zenith-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Zenith-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 11-10-03&Archive=Zenith (http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 11-10-03&Archive=Zenith)
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 11-10-03&Archive=Zenith (http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 11-10-03&Archive=Zenith)
======================
EMail Version of Today's List Digest Archive
======================
----------------------------------------------------------
Zenith-List Digest Archive
---
Total Messages Posted Mon 10/03/11: 7
----------------------------------------------------------
Today's Message Index:
----------------------
1. 04:38 AM - 601 XL bearing bloc material (Michel Therrien)
2. 05:09 AM - Re: 601 XL bearing bloc material (Paul Mulwitz)
3. 06:53 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
4. 07:40 AM - Re: [Probable Spam] 601 XL bearing bloc material (Malcolm Hunt)
5. 09:31 AM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
6. 10:26 AM - Re: [Probable Spam] 601 XL bearing bloc material (Larry McFarland)
7. 08:26 PM - Re: [Probable Spam] 601 XL bearing bloc material (Michel Therrien)
________________________________ Message 1 _____________________________________
Time: 04:38:17 AM PST US
From: Michel Therrien
Subject: 601 XL bearing bloc material
Hello group,=0A=C2-=0AAs part orf my 601 renovation project, I want to re
place the lower nose wheel fork bearing with the newer style 601 XL plastic
bloc.=C2- I would like to know what material is mandated (delrin, nylon,
acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AM
ichel=0A=C2-=0Ado not archive=0A=0A----------------------------=0AMichel
Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pag (http://mthobby.pcperfect.com/ch601=0Ahttp://pag)
es.infinit.net/mthobby=0A=0A=0A________________________________=0AFrom: Lar
ry McFarland =0ATo: Zenith-List =0ASent: Wednesday, September 28, 2011 2:46:58
PM=0ASubject: Zenith-
List: access panel drawing =0A=0A=0AHi guys,=0AI=99ve had a few peopl
e ask about a drawing for the inspection panels I use on my 601HDS. =0AThe
link below will get you to the drawing on my site and clicking the drawing
at the bottom =0Aof the page will get you to a larger image that=99s
printable. The panels serve my plane well=0Aand have never given any diffic
ulty. =C2-If you want to make a set of these, the drawing is =0Aa good gu
ide.=0A=C2-=0Ahttp://www.macsmachine.com/html/winginsppanels.htm=0A=C2- (http://www.macsmachine.com/html/winginsppanels.htm=0A=C2-)
=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarland=C2- 601HDS at www.m
=====================
________________________________ Message 2 _____________________________________
Time: 05:09:52 AM PST US
From: Paul Mulwitz
Subject: Re: 601 XL bearing bloc material
Hi Michael,
I'm not sure whether mine is the old or new stuff, but I think it is
Nyloil -- oil impregnated nylon.
Paul
XL in flight test
On 10/3/2011 4:35 AM, Michel Therrien wrote:
> Hello group,
> As part orf my 601 renovation project, I want to replace the lower
> nose wheel fork bearing with the newer style 601 XL plastic bloc. I
> would like to know what material is mandated (delrin, nylon, acetal,
> UHMWE?) and what is the thickness.
> Thanks!
> Michel
> do not archive
> ----------------------------
> Michel Therrien CH601-HD, C-GZGQ
> http://mthobby.pcperfect.com/ch601 (http://mthobby.pcperfect.com/ch601)
> http://pages.infinit.net/mthobby (http://pages.infinit.net/mthobby)
> *From:* Larry McFarland
> *To:* Zenith-List
> *Sent:* Wednesday, September 28, 2011 2:46:58 PM
> *Subject:* Zenith-List: access panel drawing
>
> Hi guys,
> Ive had a few people ask about a drawing for the inspection panels I
> use on my 601HDS.
> The link below will get you to the drawing on my site and clicking the
> drawing at the bottom
> of the page will get you to a larger image thats printable. The
> panels serve my plane well
> and have never given any difficulty. If you want to make a set of
> these, the drawing is
> a good guide.
> http://www.macsmachine.com/html/winginsppanels.htm (http://www.macsmachine.com/html/winginsppanels.htm)
> Fly safe guys,
> Larry McFarland 601HDS at www.macsmachine.com
>
> *
>
> el=nofollow target=_blank>http://www.matronics.com/Navigator?Zenith-List (http://www.matronics.com/Navigator?Zenith-List)
> et=_blank>http://forums.matronics.com (http://forums.matronics.com)
> llow target=_blank>http://www.matronics.com/contribution (http://www.matronics.com/contribution)
>
> *
>
>
> *
>
>
> *
>
>
________________________________ Message 3 _____________________________________
Time: 06:53:51 AM PST US
From: "Larry McFarland"
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm (http://www.k-mac-plastics.net/index.htm)
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)
[mailto:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601 (http://mthobby.pcperfect.com/ch601)
http://pages.infinit.net/mthobby (http://pages.infinit.net/mthobby)
From: Larry McFarland
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm (http://www.macsmachine.com/html/winginsppanels.htm)
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List (http://www.matronics.com/Navigator?Zenith-List)
et=_blank>http://forums.matronics.com (http://forums.matronics.com)
llow target=_blank>http://www.matronics.com/contribution (http://www.matronics.com/contribution)
________________________________ Message 4 _____________________________________
Time: 07:40:30 AM PST US
From: "Malcolm Hunt"
Subject: RE: [Probable Spam] 601 XL bearing bloc material
Hi Michael
The plans call up Nyoil @ 1.5=9D thick, can be obtained in England
so should be easy with you.
Nylon is not the easiest to work but the part from the factory is
expensive.
Hope this helps
Malcolm Hunt
Plans builder in England
From: owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)
[mailto:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)] On Behalf Of Larry
McFarland
Sent: 03 October 2011 14:51
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm (http://www.k-mac-plastics.net/index.htm)
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)
[mailto:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601 (http://mthobby.pcperfect.com/ch601)
http://pages.infinit.net/mthobby (http://pages.infinit.net/mthobby)
From: Larry McFarland
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm (http://www.macsmachine.com/html/winginsppanels.htm)
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List (http://www.matronics.com/Navigator?Zenith-List)
et=_blank>http://forums.matronics.com (http://forums.matronics.com)
llow target=_blank>http://www.matronics.com/contribution (http://www.matronics.com/contribution)
http://www.matronics.com/Navigator?Zenith-List (http://www.matronics.com/Navigator?Zenith-List)
http://forums.matronics.com (http://forums.matronics.com)
http://www.matronics.com/contribution (http://www.matronics.com/contribution)
__________ Information from ESET Smart Security, version of virus
signature database 6512 (20111003) __________
The message was checked by ESET Smart Security.
________________________________ Message 5 _____________________________________
Time: 09:31:00 AM PST US
From: Michel Therrien
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed tha
t my gear leg got a bit of wear (0.003") from movement over the=C2-6 year
s that the plane flew (probably constant rudder movement).=C2- I would li
ke to do away of the aluminum contact on the nose wheel... did you make it
so that contact is only on the plastic part?=C2- =0A=C2-=0AThanks!=0A
=C2-=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrie
n CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infi (http://mthobby.pcperfect.com/ch601=0Ahttp://pages.infi)
nit.net/mthobby=0A=0A=0A________________________________=0AFrom: Larry McFa
rland =0ATo: zenith-list@matronics.com (zenith-list@matronics.com)=0ASent: Monda
y, October 3, 2011 9:50:31 AM=0ASubject: RE: [Probable Spam] 6
01 XL bearing bloc material=0A=0A=0AHI Michel,=0AI=99m using UHMWE at
3/8-inch thickness that replaced Nylon that absorbed water.=C2- =0ANot s
o expensive and easy to work. =0AReasonable Source:=C2-=C2- http://www (http://www).
k-mac-plastics.net/index.htm =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601
HDS at www.macsmachine.com=0A=C2-=0AFrom:owner-zenith-list-server@matroni
cs.com [mailto:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)] On Behalf Of Michel
Therrien=0ASent: Monday, October 03, 2011 6:35 AM=0ATo: zenith-list@matroni
cs.com=0ASubject: [Probable Spam] 601 XL bearing bloc material
=0A=C2-=0AHello group,=0A=C2-=0AAs part orf my 601 renovation project,
I want to replace the lower nose wheel fork bearing with the newer style 60
1 XL plastic bloc.=C2- I would like to know what material is mandated (de
lrin, nylon, acetal, UHMWE?) and what is the thickness.=0A=C2-=0AThanks!
=0A=C2-=0AMichel=0A=C2-=0Ado not archive=0A=C2-=0A-------------------
---------=0AMichel Therrien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com (http://mthobby.pcperfect.com)
/ch601=0Ahttp://pages.infinit.net/mthobby=0AFrom:Larry (http://pages.infinit.net/mthobby=0AFrom:Larry) McFarland =0ATo: Zenith-List =0ASent: Wednesd
ay, September 28, 2011 2:46:58 PM=0ASubject: access panel draw
ing =0AHi guys,=0AI=99ve had a few people ask about a drawing for the
inspection panels I use on my 601HDS. =0AThe link below will get you to th
e drawing on my site and clicking the drawing at the bottom =0Aof the page
will get you to a larger image that=99s printable. The panels serve m
y plane well=0Aand have never given any difficulty. =C2-If you want to ma
ke a set of these, the drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.ma (http://www.ma)
csmachine.com/html/winginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A
=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2
-=0A=C2-=0Ael=nofollow target=_blank>http://www.matronics.com/Navig (http://www.matronics.com/Navig)
ator?Zenith-List=0Aet=_blank>http://forums.matronics.com=0Allow (http://forums.matronics.com=0Allow) target
_blank>http://www.matronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A (http://www.matronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A)
=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp://forums.mat (http://www.matronics.com/Navigator?Zenith-List=0Ahttp://forums.mat)
========
________________________________ Message 6 _____________________________________
Time: 10:26:12 AM PST US
From: "Larry McFarland"
Subject: RE: [Probable Spam] Zenith-List: 601 XL bearing bloc material
Yes Michel,
I noticed wear in the same fore and aft areas and made adjustments to
keep the tube
> From being in contact with the aluminum. With the UHMWE, that works
> rather well.
>
Get a good fit with the bearing plastic and then remove a little
aluminum for clearance.
It=99ll hold.
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)
[mailto:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 11:28 AM
Subject: Re: [Probable Spam] Zenith-List: 601 XL bearing bloc material
I use 1/4 inch UHMWE flush with the original 1/8" aluminum... i noticed
that my gear leg got a bit of wear (0.003") from movement over the 6
years that the plane flew (probably constant rudder movement). I would
like to do away of the aluminum contact on the nose wheel... did you
make it so that contact is only on the plastic part?
Thanks!
Michel
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601 (http://mthobby.pcperfect.com/ch601)
http://pages.infinit.net/mthobby (http://pages.infinit.net/mthobby)
From: Larry McFarland
Sent: Monday, October 3, 2011 9:50:31 AM
Subject: RE: [Probable Spam] 601 XL bearing bloc material
HI Michel,
I=99m using UHMWE at 3/8-inch thickness that replaced Nylon that
absorbed water.
Not so expensive and easy to work.
Reasonable Source: http://www.k-mac-plastics.net/index.htm (http://www.k-mac-plastics.net/index.htm)
Larry McFarland 601HDS at www.macsmachine.com
From: owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)
[mailto:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)] On Behalf Of Michel
Therrien
Sent: Monday, October 03, 2011 6:35 AM
Subject: [Probable Spam] 601 XL bearing bloc material
Hello group,
As part orf my 601 renovation project, I want to replace the lower nose
wheel fork bearing with the newer style 601 XL plastic bloc. I would
like to know what material is mandated (delrin, nylon, acetal, UHMWE?)
and what is the thickness.
Thanks!
Michel
do not archive
----------------------------
Michel Therrien CH601-HD, C-GZGQ
http://mthobby.pcperfect.com/ch601 (http://mthobby.pcperfect.com/ch601)
http://pages.infinit.net/mthobby (http://pages.infinit.net/mthobby)
From: Larry McFarland
Sent: Wednesday, September 28, 2011 2:46:58 PM
Subject: access panel drawing
Hi guys,
I=99ve had a few people ask about a drawing for the inspection
panels I use on my 601HDS.
The link below will get you to the drawing on my site and clicking the
drawing at the bottom
of the page will get you to a larger image that=99s printable. The
panels serve my plane well
and have never given any difficulty. If you want to make a set of
these, the drawing is
a good guide.
http://www.macsmachine.com/html/winginsppanels.htm (http://www.macsmachine.com/html/winginsppanels.htm)
Fly safe guys,
Larry McFarland 601HDS at www.macsmachine.com
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List (http://www.matronics.com/Navigator?Zenith-List)
et=_blank>http://forums.matronics.com (http://forums.matronics.com)
llow target=_blank>http://www.matronics.com/contribution (http://www.matronics.com/contribution)
http://www.matronics.com/Navigator?Zenith-List (http://www.matronics.com/Navigator?Zenith-List)
http://forums.matronics.com (http://forums.matronics.com)
http://www.matronics.com/contribution (http://www.matronics.com/contribution)
el=nofollow
target=_blank>http://www.matronics.com/Navigator?Zenith-List (http://www.matronics.com/Navigator?Zenith-List)
et=_blank>http://forums.matronics.com (http://forums.matronics.com)
llow target=_blank>http://www.matronics.com/contribution (http://www.matronics.com/contribution)
________________________________ Message 7 _____________________________________
Time: 08:26:16 PM PST US
From: Michel Therrien
Subject: Re: [Probable Spam] 601 XL bearing bloc material
I noticed different varieties of Nyloil... there is the green one and then,
the MDX (gray or blue).=C2- Are they interchangeable?=C2- It appears t
hat the kit part is the grey Nyloil (that is filled with Moly...).=0A=C2-
=0AMichel=0A=C2-=0A=0A----------------------------=0AMichel Therrien CH60
1-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.infinit.ne (http://mthobby.pcperfect.com/ch601=0Ahttp://pages.infinit.ne)
t/mthobby=0A=0A=0A________________________________=0AFrom: Malcolm Hunt =0ATo:
zenith-list@matronics.com (zenith-list@matronics.com)=0ASent: Mo
nday, October 3, 2011 10:37:46 AM=0ASubject: RE: [Probable Spam] Zenith-Lis
t: 601 XL bearing bloc material=0A=0A=0AHi Michael=0A=C2-=0AThe plans cal
l up Nyoil @ 1.5=9D thick, can be obtained in England so should be ea
sy with you.=0A=C2-=0ANylon is not the easiest to work but the part from
the factory is expensive.=0A=C2-=0AHope this helps=0A=C2-=0AMalcolm Hun
t=0APlans builder in England=0A=C2-=0AFrom:owner-zenith-list-server@matro
nics.com [mailto:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com)] On Behalf Of Larry
McFarland=0ASent: 03 October 2011 14:51=0ATo: zenith-list@matronics.com (zenith-list@matronics.com)=0A
Subject: RE: [Probable Spam] 601 XL bearing bloc material=0A
=C2-=0AHI Michel,=0AI=99m using UHMWE at 3/8-inch thickness that re
placed Nylon that absorbed water.=C2- =0ANot so expensive and easy to wor
k. =0AReasonable Source:=C2-=C2- http://www.k-mac-plastics.net/index.ht (http://www.k-mac-plastics.net/index.ht)
m =0A=C2-=0A=C2-=0ALarry McFarland=C2- 601HDS at www.macsmachine.com
=0A=C2-=0AFrom:owner-zenith-list-server@matronics.com (owner-zenith-list-server@matronics.com) [mailto:owner-zenit
h-list-server@matronics.com (h-list-server@matronics.com)] On Behalf Of Michel
Therrien=0ASent: Monday, O
ctober 03, 2011 6:35 AM=0ATo: zenith-list@matronics.com (zenith-list@matronics.com)=0ASubject:
[Probabl
e Spam] Zenith-List: 601 XL bearing bloc material=0A=C2-=0AHello group,
=0A=C2-=0AAs part orf my 601 renovation project, I want to replace the lo
wer nose wheel fork bearing with the newer style 601 XL plastic bloc.=C2-
I would like to know what material is mandated (delrin, nylon, acetal, UHM
WE?) and what is the thickness.=0A=C2-=0AThanks!=0A=C2-=0AMichel=0A=C2
-=0Ado not archive=0A=C2-=0A----------------------------=0AMichel Therr
ien CH601-HD, C-GZGQ=0Ahttp://mthobby.pcperfect.com/ch601=0Ahttp://pages.in (http://mthobby.pcperfect.com/ch601=0Ahttp://pages.in)
finit.net/mthobby=0AFrom:Larry McFarland =0ATo: Zeni
th-List =0ASent: Wednesday, September 28, 2011 2
:46:58 PM=0ASubject: access panel drawing =0AHi guys,=0AI
=99ve had a few people ask about a drawing for the inspection panels I u
se on my 601HDS. =0AThe link below will get you to the drawing on my site a
nd clicking the drawing at the bottom =0Aof the page will get you to a larg
er image that=99s printable. The panels serve my plane well=0Aand hav
e never given any difficulty. =C2-If you want to make a set of these, the
drawing is =0Aa good guide.=0A=C2-=0Ahttp://www.macsmachine.com/html/win (http://www.macsmachine.com/html/win)
ginsppanels.htm=0A=C2-=0A=C2-=0AFly safe guys,=0A=C2-=0ALarry McFarla
nd=C2- 601HDS at www.macsmachine.com=0A=C2-=0A=C2-=0A=C2-=0Ael=no
follow target=_blank>http://www.matronics.com/Navigator?Zenith-List=0Aet (http://www.matronics.com/Navigator?Zenith-List=0Aet)
=_blank>http://forums.matronics.com=0Allow (http://forums.matronics.com=0Allow) target=_blank>http://www.mat (http://www.mat)
ronics.com/contribution=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0A=C2-=0Ahttp
://www.matronics.com/Navigator?Zenith-List=0A=C2-=0Ahttp://forums.matroni (http://forums.matroni)
cs.com=0A=C2-=0Ahttp://www.matronics.com/contribution=0A=C2-=0A=C2- (http://www.matronics.com/contribution=0A=C2-=0A=C2-)
=0A=C2-=0A=C2-=0Ahttp://www.matronics.com/Navigator?Zenith-List=0Ahttp (http://www.matronics.com/Navigator?Zenith-List=0Ahttp):
//forums.matronics.com=0Ahttp://www.matronics.com/contribution=0A=C2-=0A (http://www.matronics.com/contribution=0A=C2-=0A)
=0A=0A__________ Information from ESET Smart Security, version of virus sig
nature database 6512 (20111003) __________=0A=0AThe message was checked by
ESET Smart Security.=0A=0A=0Ahttp:/ics.com" target=_blank p; &nhttp://w======================
> [b]
[Rolling Eyes]
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=355526#355526
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|