Today's Message Index:
----------------------
1. 07:16 AM - Re: Shroud inlet / outlet options (Steve Freeman)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | RE: Shroud inlet / outlet options |
Hi Clinton,
Do I still need to purchase a separate "box" with a valve that opens and
closes to move the heat (or deflect) from cabin? Do I still need to plan on
ordering something like this from Zenair? Since I can't see the CARB HEAT
set up I don't know what I will still need.
Or something like this from Aircraft spruce?
I don't think I can answer which I need until I know how heat will actually
get in to the cabin. Do you have an image of the actual set up I would be
purchasing? At this point I am a little confused. I need to get air from
the cowl scoop in to the carb. This has nothing to do with the exhaust and
I guess I am too much a of a visual person but I do not see how this all
comes together.
IN picture 33807-4 I cannot see where the heat exchanger is located.
Steve
From: Clinton Anderson [mailto:clinton@customaircraft.com]
Sent: Thursday, January 12, 2012 5:34 PM
Subject: Shroud inlet / outlet options
Steve,
As they say a picture is worth a thousand words, this picture of P/N 33208
shows a cabin heat shroud with 2'' diameter hose connections placed 90
degree's apart from each other.
P/N 33807-4 shows the cabin heat shroud with the hose connections inline
with each other.
Clinton
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|