---------------------------------------------------------- Zenith-List Digest Archive --- Total Messages Posted Mon 07/14/14: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:50 AM - Re: Re: Tale of two Carbs (FLYaDIVE) 2. 08:12 AM - Re: Re: Tale of two Carbs (Phil Maxson) ________________________________ Message 1 _____________________________________ Time: 07:50:21 AM PST US Subject: Re: Zenith-List: Re: Tale of two Carbs From: FLYaDIVE Hello Ron: The EGT temps are good and the drop is what is to expected due to higher fuel flow. BUT! The Oil Temps are a bit high. I would like to see them less than 200F. How is your oil cooler - Is it big enough? Is it in a good FORCED air flow? If you have a real good cooling the temps should be around 180F. Barry On Sun, Jul 13, 2014 at 10:37 PM, Ron Lendon wrote: > > Today I was flying at 3000' and engine was leaned out to about 1350-1380 > EGT at 2800 RPM. I pushed the throttle full and watched the EGT's go down > to1200 without moving anything but the throttle. OAT was 67F and all the > other temps were in the green, CHT 280-300, OT 220-230. I think things are > looking pretty good now that the engine is getting enough fuel. > > -------- > Ron Lendon > WW Corvair with Roy's Garage 5th bearing > CH 601 XLB > N601LT - Flying > http://www.mykitlog.com/rlendon > Corvair Engine Prints: > https://sites.google.com/site/corvairenginedata/ > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=426615#426615 > > ________________________________ Message 2 _____________________________________ Time: 08:12:28 AM PST US Subject: Re: Zenith-List: Re: Tale of two Carbs From: Phil Maxson What temps do you normally see on your Corvair, Barry? Phil Maxson 601XLB/Corvair > On Jul 14, 2014, at 10:53 AM, "FLYaDIVE" wrote: > > Hello Ron: > > The EGT temps are good and the drop is what is to expected due to higher f uel flow. BUT! The Oil Temps are a bit high. I would like to see them les s than 200F. How is your oil cooler - Is it big enough? Is it in a good FO RCED air flow? If you have a real good cooling the temps should be around 1 80F. > > Barry > > >> On Sun, Jul 13, 2014 at 10:37 PM, Ron Lendon wrote : >> >> Today I was flying at 3000' and engine was leaned out to about 1350-1380 E GT at 2800 RPM. I pushed the throttle full and watched the EGT's go down to 1200 without moving anything but the throttle. OAT was 67F and all the other temps were in the green, CHT 280-300, OT 220-230. I think things are looki ng pretty good now that the engine is getting enough fuel. >> >> -------- >> Ron Lendon >> WW Corvair with Roy's Garage 5th bearing >> CH 601 XLB >> N601LT - Flying >> http://www.mykitlog.com/rlendon >> Corvair Engine Prints: >> https://sites.google.com/site/corvairenginedata/ >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=426615#426615 >> >> >> >> >> >> >> >> ========== >> target="_blank">http://www.matronics.com/Navigator?Zenith-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith-list Browse Digests http://www.matronics.com/digest/zenith-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.