Today's Message Index:
----------------------
1. 09:55 AM - Re: Cruzer-list (D L Josephson)
2. 02:38 PM - Re: Re: Cruzer-list ()
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
On 10/2/15 12:03 AM, Zenith-List Digest Server wrote:
> Time: 08:23:03 PM PST US
> From: <paulrod36@msn.com>
> Subject: Zenith-List: Cruzer List
>
> Well now the deed is done. I've managed to strip out the 601's engine=2C
> mount. avionics=2C instruments=2C wiring and everything else non-aluminum i
> n the airframe and shelve it=2C pending its reincarnation as a 750 Cruzer.
>
> Now that I am deeply engrossed in a 750 Cruzer quick build kit=2C I was
> wondering if there are any Cruzer paisanos out there=2C who can add some ex
> perienced advice.
Maybe, what experienced advice are you looking for? The advice I can
offer is (a) the holes *are* in the right place and (b) there is a right
way everything fits together if you stare at it for long enough.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Yeah=2C I'm going to be doing a lot of staring=2C I fear. I drove over to
Mexico with my vertical stabilizer=2C and Roger told me how they did it. I
t's kind of catchy=2C though=2C the holes in the vert stab skin are not dri
lled where the holes in the ribs are=2C and vice versa. Turns out also=2C
that you trim the skin to go even with the spar flanges=2C and cut out the
relief at the bottom to accommodate the upper surface of the horizontal sta
bilizer----all of which is not addressed in the drawings=2C and is not in
the several step-by-step instructions on the site. Good thing they're such
helpful folks. Fortunately=2C I got the quick-build kit=2C which makes thi
ngs easier.
Paul R
> Subject: Zenith-List: Re: Cruzer-list
> To: zenith-list@matronics.com
> From: dlj04@josephson.com
> Date: Fri=2C 2 Oct 2015 09:54:30 -0700
>
>
> On 10/2/15 12:03 AM=2C Zenith-List Digest Server wrote:
> > Time: 08:23:03 PM PST US
> > From: <paulrod36@msn.com>
> > Subject: Zenith-List: Cruzer List
> >
> > Well now the deed is done. I've managed to strip out the 601's engin
e=2C
> > mount. avionics=2C instruments=2C wiring and everything else non-al
uminum i
> > n the airframe and shelve it=2C pending its reincarnation as a 750 Cr
uzer.
> >
> > Now that I am deeply engrossed in a 750 Cruzer quick build kit=2C
I was
> > wondering if there are any Cruzer paisanos out there=2C who can add s
ome ex
> > perienced advice.
> Maybe=2C what experienced advice are you looking for? The advice I can
> offer is (a) the holes *are* in the right place and (b) there is a right
> way everything fits together if you stare at it for long enough.
>
===========
===========
===========
===========
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|