---------------------------------------------------------- Zenith601-List Digest Archive --- Total Messages Posted Wed 09/17/08: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:23 AM - Re: Recently completed Fuel Gauge Question (steveadams) 2. 06:53 AM - Re: EA-81 - Going Going Gone... (Gig Giacona) 3. 12:32 PM - Re: Re: LSA OR EXPERIMENTAL (Jim Belcher) 4. 12:45 PM - Re: Re: EA-81 - Going Going Gone... (Craig Payne) ________________________________ Message 1 _____________________________________ Time: 05:23:49 AM PST US Subject: Zenith601-List: Re: Recently completed Fuel Gauge Question From: "steveadams" Even if you plan long legs, an accurate measure of the upper half of the tanks is relatively unimportant. Accurate readings from 10 gal in each tank on down gives you plenty of time to compare your actual fuel burn to what was planned, and modify your plan as required. That's assuming you're not doing 5 hour legs over open water or other places with no options for landing other than your departure and destination airport. Steve Read this topic online here: http://forums.matronics.com/viewtopic.php?p 4745#204745 ________________________________ Message 2 _____________________________________ Time: 06:53:11 AM PST US Subject: Zenith601-List: Re: EA-81 - Going Going Gone... From: "Gig Giacona" Craig, are you "pavel569"? craig(at)craigandjean.com wrote: > > > That no shipping is gonna cost you a several thousand dollars. > > > > > > Depends on where you live :-) > > 1 hour 36 minutes left, $2250. Tick, tick, tick, ... > > Craig, Utah > > Do not archive -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p 4765#204765 ________________________________ Message 3 _____________________________________ Time: 12:32:26 PM PST US From: Jim Belcher Subject: Re: Zenith601-List: Re: LSA OR EXPERIMENTAL On Tuesday 16 September 2008 09:25, Jay Maynard wrote: > > On Tue, Sep 16, 2008 at 07:02:06AM -0700, Dirk Zahtilla wrote: > > I'm not an expert but I believe you can register as ELSA since the 601XL > > is being built as a SLSA by the factory. > > No. An ELSA must be built from a kit *by the same manufacturer* as the > SLSA. AMD is the SLSA manufacturer; Zenith Aircraft Company is the kit > supplier. AMD would have to sell the kits in order for them to be eligible > for E-LSA. As more and more of the participants on this forum provide information, what I suspect (but don't know) is that the players have created two companies for liability purposes. If AMD is legally disconnected from the kits, then they probably cannot be sued if someone builds a kit and does considerable damage to themselves or someone else with it. But an attorney would need to give the final word on that conjecture. Up to this point, I had believed (incorrectly) that AMD and Zenith were the same company. That evidently is not the case. -- ============================================= Those who can, do. Those who can't, sue. ================================================ Jim B. Belcher BS, MS Physics, math, Computer Science A&P/IA Instrument Rated Pilot General Radio Telephone Certificate ================================================ ________________________________ Message 4 _____________________________________ Time: 12:45:12 PM PST US From: "Craig Payne" Subject: RE: Zenith601-List: Re: EA-81 - Going Going Gone... No, I actually didn't bid (although I considered it). But Pavel is active on the list (or has been). Look like he lives in SoCal. As expected the bidding picked up at the end and the engine went for $4383 - a good deal if it works out. -- Craig -----Original Message----- From: owner-zenith601-list-server@matronics.com [mailto:owner-zenith601-list-server@matronics.com] On Behalf Of Gig Giacona Sent: Wednesday, September 17, 2008 7:53 AM Subject: Zenith601-List: Re: EA-81 - Going Going Gone... Craig, are you "pavel569"? craig(at)craigandjean.com wrote: > > > That no shipping is gonna cost you a several thousand dollars. > > > > > > Depends on where you live :-) > > 1 hour 36 minutes left, $2250. Tick, tick, tick, ... > > Craig, Utah > > Do not archive -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p 4765#204765 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.