---------------------------------------------------------- Zenith601-List Digest Archive --- Total Messages Posted Mon 10/06/08: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:56 AM - Re: 601XL Construction Sequence (component) (Gig Giacona) 2. 11:29 AM - Elevator Trim tab deflecton? (merlin) 3. 01:19 PM - Zenith601 : [ Godo Barrenechea ] : New Email List PhotoShare Available! (Email List PhotoShares) 4. 02:05 PM - Re: Elevator Trim tab deflecton? (Bryan Martin) 5. 04:46 PM - Re: 601XL Construction Sequence (component) (PatrickW) ________________________________ Message 1 _____________________________________ Time: 09:56:31 AM PST US Subject: Zenith601-List: Re: 601XL Construction Sequence (component) From: "Gig Giacona" Tails, wings, fuselage. One reason for this is the build manual is sort of geared that way in that the fuselage section makes some assumptions about the knowledge you would have picked up building the wings. Also, you need the center spar to build the fuselage and it comes with the wing kit. -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p 7557#207557 ________________________________ Message 2 _____________________________________ Time: 11:29:23 AM PST US Subject: Zenith601-List: Elevator Trim tab deflecton? From: "merlin" My drawings, which have the latest date on them, show the deflection of 20 degrees up and 40 down however my instructions show 30 degrees up & down. Which is correct? also, should I use wire connectors for the Ray Allen servo or solder or does it really even matter? Thanks ya'll, Jeff Read this topic online here: http://forums.matronics.com/viewtopic.php?p 7568#207568 ________________________________ Message 3 _____________________________________ Time: 01:19:50 PM PST US Subject: Zenith601-List: Zenith601 : [ Godo Barrenechea ] : New Email List PhotoShare Available! From: Email List PhotoShares (Listers - Sorry for the delay in processing this Photoshare; all of the incoming Photoshares where getting caught by my email client's spam filter. I wondered why nobody had posted a Photoshare in a long while... I've fixed the filter and Photoshares should be processed in a normal period of time now. -Matt) A new Email List PhotoShare is available: Poster: Godo Barrenechea Lists: Zenith-List,Zenith601-List Subject: New Canopy for 601XL http://www.matronics.com/photoshare/godofredo.barrenechea@hp.com.10.06.2008 ---------------------------------------------------------- o Main PhotoShare Index http://www.matronics.com/photoshare o Submitting a PhotoShare If you wish to submit a PhotoShare of your own, please include the following information along with your email message and files: 1) Email List or Lists that they are related to: 2) Your Full Name: 3) Your Email Address: 4) One line Subject description: 5) Multi-line, multi-paragraph description of topic: 6) One-line Description of each photo or file: Email the information above and your files and photos to: pictures@matronics.com ---------------------------------------------------------- ________________________________ Message 4 _____________________________________ Time: 02:05:46 PM PST US From: Bryan Martin Subject: Re: Zenith601-List: Elevator Trim tab deflecton? You will generally need more nose up trim (tab down) so the drawings are probably correct. I used small crimp type butt connectors from radio shack for the servo connections in the elevator. Others have used small Molex type connectors or DB9 connectors. On Oct 6, 2008, at 2:28 PM, merlin wrote: > > > > My drawings, which have the latest date on them, show the deflection > of 20 degrees up and 40 down however my instructions show 30 degrees > up & down. Which is correct? also, should I use wire connectors for > the Ray Allen servo or solder or does it really even matter? > > Thanks ya'll, > > Jeff > -- Bryan Martin N61BM, CH 601 XL, RAM Subaru, Stratus redrive. do not archive. ________________________________ Message 5 _____________________________________ Time: 04:46:12 PM PST US Subject: Zenith601-List: Re: 601XL Construction Sequence (component) From: "PatrickW" I built tail, then flaps/ailerons, then wings. Now on fuselage. While waiting for component kits from Zenith, I worked on building my engine. Have fun! - Pat -------- Patrick 601XL/Corvair N63PZ (reserved) Read this topic online here: http://forums.matronics.com/viewtopic.php?p 7670#207670 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.