---------------------------------------------------------- Zenith601-List Digest Archive --- Total Messages Posted Fri 01/23/09: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:33 AM - Re: Rotax Weight (from Dutch XL thread) (rans6andrew) 2. 04:00 AM - Re: Dutch XL crash findings (Thruster87) 3. 04:45 AM - Intake Manifold (Ianrat) 4. 06:23 AM - Re: Dutch XL crash findings (Gig Giacona) 5. 06:38 AM - Re: Dutch XL crash findings (stepinwolf) 6. 06:52 AM - Re: Intake Manifold (jaybannist@cs.com) ________________________________ Message 1 _____________________________________ Time: 01:33:00 AM PST US Subject: Zenith601-List: Re: Rotax Weight (from Dutch XL thread) From: "rans6andrew" alex, did you set the aircraft level (spirit level on cockpit side rails etc) and close the canopy before reading the scales? Overall weight will be spot on but calculated CofG will be off if you didn't. Andrew. -------- A good way through building a 601UL with 912UL. Still flying Rans S6 with 503. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226310#226310 ________________________________ Message 2 _____________________________________ Time: 04:00:36 AM PST US Subject: Zenith601-List: Re: Dutch XL crash findings From: "Thruster87" Hi Chris you are correct.Been so busy building I got ahead of myself with respect to upcoming changes/proposals from CASA.To meet the LSA 1 of the following conditions is satisfied: (i) the manufacturer of the aeroplane, or of the kit, was the holder of a certificate of approval in relation to the manufacture of, or of kits for, aeroplanes of a kind that includes the particular aeroplane; (ii) the aeroplane, or the kit, was manufactured in accordance with an approval given by CASA; (iii) if the aeroplane, or the kit, was exported to Australia, a certificate that is acceptable to CASA and that relates to the airworthiness of the aeroplane, or the aeroplane that could be assembled from the kit, has been issued by the appropriate authority of the country from which the aeroplane, or the kit, was exported; So we are still waiting??? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226320#226320 ________________________________ Message 3 _____________________________________ Time: 04:45:09 AM PST US Subject: Zenith601-List: Intake Manifold From: "Ianrat" Would any one have the dimensions for a WW style intake Manifold for the Corvair on a 601XL. I have a picture attached if you could just get the three dimensions. Thank you ianrat Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226323#226323 Attachments: http://forums.matronics.com//files/manifold_model_1_163.pdf ________________________________ Message 4 _____________________________________ Time: 06:23:58 AM PST US Subject: Zenith601-List: Re: Dutch XL crash findings From: "Gig Giacona" psm(at)att.net wrote: > Hi Gig, > > What law is it you would violate if you flew your plane over max gross weight? > > Paul > Do not archive > 91.13 -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226342#226342 ________________________________ Message 5 _____________________________________ Time: 06:38:31 AM PST US Subject: Zenith601-List: Re: Dutch XL crash findings From: "stepinwolf" Gig Giacona wrote: > > psm(at)att.net wrote: > > Hi Gig, > > > > What law is it you would violate if you flew your plane over max gross weight? > > > > Paul > > Do not archive > > > > > > 91.13 Probably the law of survival,,,, Stepinwolf 701&750 Scratch -------- Live each day, as if it was your last Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226343#226343 ________________________________ Message 6 _____________________________________ Time: 06:52:22 AM PST US Subject: Re: Zenith601-List: Intake Manifold From: jaybannist@cs.com Ian, Here is a drawing I made of the manifold as received from WW, before I installed it.? I actually had to bend it slightly to decrease the distance (~0.5") between the upper sections to fit the pipes on the engine.? Not a big deal.? And, of course, the lengths of the upper horizontal sections are different.? The side view shows the proximity to the motor mount. This is not an engineering drawing, but a measured drawing, without lasers and such.? I think it is accurate, but take it for what it is worth.? I hope it helps. Let me know if you have questions. Jay Bannister -----Original Message----- From: Ianrat Sent: Fri, 23 Jan 2009 6:44 am Subject: Zenith601-List: Intake Manifold Would any one have the dimensions for a WW style intake Manifold for the Corvair on a 601XL. I have a picture attached if you could just get the three dimensions. Thank you ianrat Read this topic online here: http://forums.matronics.com/viewtopic.php?p=226323#226323 Attachments: http://forums.matronics.com//files/manifold_model_1_163.pdf ________________________________________________________________________ Email message sent from CompuServe - visit us today at http://www.cs.com ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.