---------------------------------------------------------- Zenith601-List Digest Archive --- Total Messages Posted Fri 09/25/09: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:39 AM - Flap position Indicator (Thruster87) 2. 04:42 AM - Re: Wanted Zenith 601xl Decal (Afterfxllc@aol.com) 3. 06:45 AM - Re: Wanted Zenith 601xl Decal (Gig Giacona) 4. 01:37 PM - Instrument panel files for CH601XL (mhubel) 5. 01:40 PM - Re: Wanted Zenith 601xl Decal (Thruster87) ________________________________ Message 1 _____________________________________ Time: 01:39:14 AM PST US Subject: Zenith601-List: Flap position Indicator From: "Thruster87" Anyone used a ELECTRONIC FLAP CONTROLLER The Flap Controller is a combination drive unit for the flap actuator, and an indicator of flap position. It features momentary push button switches with built in green LED lights, providing settings for 4 flap positions. Each switch can be user pro- grammed to a specific flap position. Once calibrated, momentarily pushing any switch, will then automatically drive the flaps to the pre selected position and stop.The flap controller can work with any actuator that draws less than 7 amps current at 12 volts when operating. It requires that the system have a 5K or 10K resistive position sensor that provides feedback of flap position. Many actuators incorporate this type of sensor in the unit, or separate linear resistive sensors are available from equipment suppliers. Cheers Read this topic online here: http://forums.matronics.com/viewtopic.php?p=264890#264890 ________________________________ Message 2 _____________________________________ Time: 04:42:46 AM PST US From: Afterfxllc@aol.com Subject: Re: Zenith601-List: Wanted Zenith 601xl Decal I can cut them for you... I did the vinyl for my plane. I am changing where the ZODIAC 601XL is on the wing tip I don't like how it looks. Jeff ________________________________ Message 3 _____________________________________ Time: 06:45:42 AM PST US Subject: Zenith601-List: Re: Wanted Zenith 601xl Decal From: "Gig Giacona" ACS has a couple -------- W.R. "Gig" Giacona 601XL Under Construction See my progress at www.peoamerica.net/N601WR Read this topic online here: http://forums.matronics.com/viewtopic.php?p=264910#264910 ________________________________ Message 4 _____________________________________ Time: 01:37:27 PM PST US Subject: Zenith601-List: Instrument panel files for CH601XL From: "mhubel" I have posted a set of turbocad files that were used for the CH601XL. These are on http://groups.yahoo.com/group/jabiruengines/files/ you may need to register to access them. The files are under the file name turbocad_CH601_instrument_panel_N708HU.zip Included in the files are three layers (options->layers) that are the actual holes, the part outlines and the space guidelines. Only the first (black) layer is to be used for fabrication. The instrument panel was actually made by Rapid Sheet Metal Inc Kristen Spratt 603-821-5300 603-889-4266 fax customerservice@rapidsheetmetal.com This design was $390 (quantity 1) including painting. The cost won't vary much with the layout. It was 0.090 thick and was painted by Rapid Sheet Metal. It was put on top of the sheet metal already there. All openings in he existing panel were made slightly oversize for ease of alignment. If you use these drawings and this vendor, I suggest not using any countersunk screw holes as these are 2D drawings and the countersunk holes really don't make it look any better. -------- Mark Hubelbank Read this topic online here: http://forums.matronics.com/viewtopic.php?p=265005#265005 ________________________________ Message 5 _____________________________________ Time: 01:40:47 PM PST US Subject: Zenith601-List: Re: Wanted Zenith 601xl Decal From: "Thruster87" Afterfxllc(at)aol.com wrote: > I can cut them for you... I did the vinyl for my plane. > > I am changing where the ZODIAC 601XL is on the wing tip I don't like how it looks. > > Jeff Thank you for the offer but I'm after the Zenith Logo Cheers Alan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=265007#265007 Attachments: http://forums.matronics.com//files/zac_logo_117.gif ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.