---------------------------------------------------------- Zenith601-List Digest Archive --- Total Messages Posted Wed 10/07/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:49 PM - Firewall Forward Kit from Jab USA/Camloc Fasteners (AZFlyer) 2. 01:24 PM - Re: Firewall Forward Kit from Jab USA/Camloc Fasteners (KARL POLIFKA) 3. 01:33 PM - Re: Firewall Forward Kit from Jab USA/Camloc Fasteners (mhubel) 4. 03:15 PM - Re: Firewall Forward Kit from Jab USA/Camloc Fasteners (Paul Mulwitz) ________________________________ Message 1 _____________________________________ Time: 12:49:06 PM PST US Subject: Zenith601-List: Firewall Forward Kit from Jab USA/Camloc Fasteners From: "AZFlyer" List, For those using the Jab USA supplied FWF kit: Has anybody found the "Camloc Fasteners" (10 - Camloc #26S8-6) to be too long for the cowl? Just right? or ? My cowl thickness seems to be around .150" which would indicate a 26S8-4 or -5. I may be measuring incorrectly.....? Thanks for feedback. Mike -------- Mike Miller @ millrml@aol.com 601 XL, 3300, Dynon Remember, "the second mouse gets the cheese"! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=266981#266981 ________________________________ Message 2 _____________________________________ Time: 01:24:04 PM PST US From: "KARL POLIFKA" Subject: Re: Zenith601-List: Firewall Forward Kit from Jab USA/Camloc Fasteners We have a Jabiru FWF kit of a few years ago. The camlocs vary from # 5 to #6 for reasons I can't explain -- just reality. Karl Polifka ----- Original Message ----- From: AZFlyer To: zenith601-list@matronics.com Sent: Wednesday, October 07, 2009 3:48 PM Subject: Zenith601-List: Firewall Forward Kit from Jab USA/Camloc Fasteners List, For those using the Jab USA supplied FWF kit: Has anybody found the "Camloc Fasteners" (10 - Camloc #26S8-6) to be too long for the cowl? Just right? or ? My cowl thickness seems to be around .150" which would indicate a 26S8-4 or -5. I may be measuring incorrectly.....? Thanks for feedback. Mike -------- Mike Miller @ millrml@aol.com 601 XL, 3300, Dynon Remember, "the second mouse gets the cheese"! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=266981#266981 ________________________________ Message 3 _____________________________________ Time: 01:33:42 PM PST US Subject: Zenith601-List: Re: Firewall Forward Kit from Jab USA/Camloc Fasteners From: "mhubel" I found that the fiberglass thickness was highly variable and there was no one size camloc that would work everywhere. Going just by the measurement may also lead to cams that are somewhat hard to open or almost fall out. I bought a few on each side of ideal and did a best fit to each hole. I used a range of #4 to #6. -------- Mark Hubelbank Read this topic online here: http://forums.matronics.com/viewtopic.php?p=266996#266996 ________________________________ Message 4 _____________________________________ Time: 03:15:04 PM PST US From: Paul Mulwitz Subject: Re: Zenith601-List: Firewall Forward Kit from Jab USA/Camloc Fasteners I glued in a little extra fiberglass where it was needed to make the cowl the right thickness for the camlocs. This was needed in some places and not in other places. Paul XL awaiting engineering changes At 12:48 PM 10/7/2009, you wrote: >Has anybody found the "Camloc Fasteners" (10 - Camloc #26S8-6) to be >too long for the cowl? Just right? or ? ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.