Today's Message Index:
----------------------
1. 08:51 AM - Trim Tab (David Brown)
2. 09:38 AM - Re: Trim Tab (Dave Austin)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
> I also have the small trim tab. I called Zenith they said it needed to
> bigger. So I over lapped the existing Tab with a new piece of aluminum that
> gave me twice the previous surface area. Since I never needed any down
> trim, I reposition the length of the arm from the servo so that neutral for
> the servo is slightly up trim, this gives about 10 or 15 degrees of extra up
> trim at full throw. The trim tab itself is at neutral in normal cruise
> flight hence no extra drag.
David
N601EX
CH601XLT JAB3300
165 hrs 25 since upgrade
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
When you added the extra to the trim tab, did you check that you could
overcome full trim in both directions with the stick at all speeds?
Dave austin
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|