Today's Message Index:
----------------------
1. 06:46 AM - Chat (George Race)
2. 05:45 PM - Bracket for the mounted solid state ignition (Larry McFarland)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Live Chat Room every Monday evening around 8:00 EDT
http://www.mykitairplane.com <blocked::http://www.mykitairplane.com/>
Click on the Chat Room link at the top of the page.
George
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Bracket for the mounted solid state ignition |
Hi Guys,
I visited the hangar to do a preflight this afternoon and a friend found my
Stratus solid state ignition bracket was cracked and there was a lot of flex
in it.
Two 8.8 mm bolts holding the rectangular box to the engine were the only
thing keeping it from dropping off. I loosened the bolts and removed the
bracket
in two pieces. The .080 steel bracket would have been stout enough, but
the bolted flanges were cut square and cracks began there. I removed the
safety wire and electric connections and took the bracket home. I remade an
.080 bracket that has no corners or sharp edges. I put some high temp
silver paint on it
and hung it out for reassembly tomorrow. I think I'm probably the 10th
person that has had this bracket crack in this way. Time to look carefully
at yours, especially
if you have but one ignition.
Fly safe guys,
Larry McFarland Stratus powered 601HDS with 156 hours
at www.macsmachine.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|