Zenith601-List Digest Archive
Sun 03/20/11 |
Total Messages Posted: 8 |
Today's Message Index:
----------------------
1. 04:55 AM - Chat Reminder (George Race)
2. 06:41 AM - Wing Bolts (Bill Pagan)
3. 08:03 AM - Test (Bill Naumuk)
4. 08:36 AM - Re: Test (jaybannist@cs.com)
5. 08:36 AM - Re: Wing Bolts (Carlos Sa)
6. 09:01 AM - Re: Test (Carlos Sa)
7. 09:12 AM - Re: Test (Bill Naumuk)
8. 09:35 AM - Re: Wing Bolts (Paul Mulwitz)
Message 1
INDEX Back to Main INDEX NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 04:55:24 AM PST US
From: "George Race" <mykitairplane@mrrace.com>
Subject: Chat Reminder
Live Chat Room every Monday evening around 8:00 EDT
http://www.mykitairplane.com <blocked::http://www.mykitairplane.com/>
Click on the Chat Room link at the top of the page.
George
Message 2
INDEX Back to Main INDEX PREVIOUS Skip to PREVIOUS Message NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 06:41:55 AM PST US
From: Bill Pagan <bill.pagan@yahoo.com>
Subject: Wing Bolts
Hello All,=0A=0AFinished with the upgrade but have not-riveted the center
section back in place =0Ain the plane as of yet.--My quickbuild (snick
er-snicker) like some others has =0Athe holes for the wing bolts-in the c
arry through slightly out of shape.- =0AMy-question is should I mount t
he carry through onto the wing spar out of the =0Aplane and ream these hole
s to size or wait until I install the wings on the =0Aplane with the carry
through riveted in place.- How difficult is it to ream =0Athese holes wit
h the center section installed (looks like it would be difficult =0Ato me)
and if I ream them with the center section on the wing out of the plane =0A
is there a chance that they will have to be redone when-all is installed
on the =0Aplane?- I worry about whether things will move slightly when I
rivet it all =0Atogether.- Then of course with the holes already reamed i
t would cause things to =0Abe out of shape again.- Hope this is-clear.
=0A-=0ABill Pag=E1n=0A=0A=0A
Message 3
INDEX Back to Main INDEX PREVIOUS Skip to PREVIOUS Message NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 08:03:56 AM PST US
From: Bill Naumuk <naumuk@windstream.net>
Subject: Test
A check to see whether I can post.
Message 4
INDEX Back to Main INDEX PREVIOUS Skip to PREVIOUS Message NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 08:36:59 AM PST US
Subject: Re: Test
From: jaybannist@cs.com
Bill, What would you think if I said you can't post. (;>0 - Jay
Do not archive.
-----Original Message-----
From: Bill Naumuk <naumuk@windstream.net>
Sent: Sun, Mar 20, 2011 10:05 am
Subject: Zenith601-List: Test
ÿÿÿÿ cheÿÿÿÿo seÿÿÿÿetheÿÿÿÿcan ÿÿÿÿ.
ÿÿÿÿ
ÿÿÿÿÿÿÿÿter>ÿÿÿÿsizeÿÿÿÿbr><ÿÿÿÿ facÿÿÿÿmes ÿÿÿÿRomaÿÿÿÿssagÿÿÿÿ/fonÿÿÿÿr>ÿÿÿÿÿÿÿÿle bÿÿÿÿr=0 ÿÿÿÿpaddÿÿÿÿ0>
<ÿÿÿÿtd><ÿÿÿÿa HRÿÿÿÿ#TOPÿÿÿÿSAGEÿÿÿÿont ÿÿÿÿ=-1 ÿÿÿÿ=Timÿÿÿÿew Rÿÿÿÿ> ÿÿÿÿ>INDÿÿÿÿfontÿÿÿÿ>ÿÿÿÿk toÿÿÿÿn INÿÿÿÿ/fonÿÿÿÿb><ÿÿÿÿ
ÿÿÿÿPÿÿÿÿOUS<ÿÿÿÿt><ÿÿÿÿ sizÿÿÿÿ facÿÿÿÿmes ÿÿÿÿRomaÿÿÿÿ> Skÿÿÿÿo PRÿÿÿÿUS Mÿÿÿÿge
ÿÿÿÿÿÿÿÿÿÿÿÿt siÿÿÿÿ1 faÿÿÿÿimesÿÿÿÿ Romÿÿÿÿ ÿÿÿÿEXT<ÿÿÿÿt><ÿÿÿÿ sizÿÿÿÿ facÿÿÿÿmes ÿÿÿÿRomaÿÿÿÿ> Skÿÿÿÿo NEÿÿÿÿessaÿÿÿÿfontÿÿÿÿ>ÿÿÿÿÿÿÿÿref=ÿÿÿÿlto:ÿÿÿÿth60ÿÿÿÿst@mÿÿÿÿnicsÿÿÿÿ?subÿÿÿÿ=Re:ÿÿÿÿith6ÿÿÿÿist:ÿÿÿÿg Boÿÿÿÿ>ÿÿÿÿLISTÿÿÿÿnt><ÿÿÿÿ/a><ÿÿÿÿÿÿÿÿt siÿÿÿÿ1 faÿÿÿÿimesÿÿÿÿ Romÿÿÿÿb> Rÿÿÿÿ to ÿÿÿÿ Regÿÿÿÿng tÿÿÿÿMessÿÿÿÿ/fonÿÿÿÿb><ÿÿÿÿ
SEÿÿÿÿ<ÿÿÿÿ/td>ÿÿÿÿ<ÿÿÿÿeplyÿÿÿÿSENDÿÿÿÿegarÿÿÿÿ thiÿÿÿÿssagÿÿÿÿont>ÿÿÿÿÿÿÿÿ>ÿÿÿÿ>
ÿÿÿÿ
ÿÿÿÿ<ÿÿÿÿidthÿÿÿÿ%" aÿÿÿÿ="leÿÿÿÿ<ÿÿÿÿ sizÿÿÿÿfaceÿÿÿÿmes ÿÿÿÿromaÿÿÿÿimesÿÿÿÿlor=ÿÿÿÿ0000ÿÿÿÿme: ÿÿÿÿ><ÿÿÿÿ:36:ÿÿÿÿM PSÿÿÿÿÿÿÿÿÿÿÿÿ>ÿÿÿÿarloÿÿÿÿ <ÿÿÿÿhrefÿÿÿÿiltoÿÿÿÿlossÿÿÿÿgmaiÿÿÿÿm">cÿÿÿÿssa5ÿÿÿÿail.ÿÿÿÿ/a>&ÿÿÿÿ/i><ÿÿÿÿ/fonÿÿÿÿtd><ÿÿÿÿ<ÿÿÿÿidthÿÿÿÿ%" aÿÿÿÿ="leÿÿÿÿ<ÿÿÿÿbjecÿÿÿÿ/b><ÿÿÿÿ<ÿÿÿÿ>Re:ÿÿÿÿg Boÿÿÿÿ/u><ÿÿÿÿ/i><ÿÿÿÿt>ÿÿÿÿble>ÿÿÿÿ
ÿÿÿÿ HelÿÿÿÿBillÿÿÿÿ
ÿÿÿÿ
ÿÿÿÿ I hÿÿÿÿnotiÿÿÿÿthatÿÿÿÿts tÿÿÿÿto sÿÿÿÿ a lÿÿÿÿe reÿÿÿÿve tÿÿÿÿe orÿÿÿÿal
ÿÿÿÿ posÿÿÿÿn (iÿÿÿÿ wheÿÿÿÿe whÿÿÿÿ werÿÿÿÿilleÿÿÿÿurinÿÿÿÿvetiÿÿÿÿ ÿÿÿÿ nowÿÿÿÿave ÿÿÿÿhabiÿÿÿÿ firÿÿÿÿlaciÿÿÿÿhe tÿÿÿÿend ÿÿÿÿrillÿÿÿÿs inÿÿÿÿe
ÿÿÿÿw
ÿÿÿÿholeÿÿÿÿor iÿÿÿÿnce,ÿÿÿÿn riÿÿÿÿng tÿÿÿÿing ÿÿÿÿ, 5 ÿÿÿÿ0 drÿÿÿÿbitsÿÿÿÿeac
ÿÿÿÿ h
ÿÿÿÿ riÿÿÿÿand ÿÿÿÿ insÿÿÿÿ theÿÿÿÿcoesÿÿÿÿ ÿÿÿÿattaÿÿÿÿ picÿÿÿÿ of ÿÿÿÿfuelÿÿÿÿk: iÿÿÿÿe ceÿÿÿÿ of ÿÿÿÿpictÿÿÿÿ youÿÿÿÿ ÿÿÿÿ ÿÿÿÿe twÿÿÿÿill ÿÿÿÿ stiÿÿÿÿg ouÿÿÿÿn thÿÿÿÿp ofÿÿÿÿ tanÿÿÿÿeft ÿÿÿÿ sidÿÿÿÿ
ÿÿÿÿhe pÿÿÿÿre, ÿÿÿÿher ÿÿÿÿl biÿÿÿÿhis ÿÿÿÿhas ÿÿÿÿcuttÿÿÿÿend ÿÿÿÿped ÿÿÿÿ ÿÿÿÿkingÿÿÿÿ). Tÿÿÿÿensuÿÿÿÿa prÿÿÿÿe, tÿÿÿÿ fitÿÿÿÿall ÿÿÿÿonenÿÿÿÿ ÿÿÿÿsuggÿÿÿÿthatÿÿÿÿ youÿÿÿÿ afrÿÿÿÿpartÿÿÿÿy shÿÿÿÿduriÿÿÿÿivetÿÿÿÿ youÿÿÿÿ
ÿÿÿÿhe sÿÿÿÿprinÿÿÿÿe - ÿÿÿÿ in ÿÿÿÿtionÿÿÿÿt thÿÿÿÿlts ÿÿÿÿlaceÿÿÿÿ ÿÿÿÿ Tÿÿÿÿis mÿÿÿÿcentÿÿÿÿanadÿÿÿÿ worÿÿÿÿ butÿÿÿÿs seÿÿÿÿa goÿÿÿÿuestÿÿÿÿfor ÿÿÿÿ ÿÿÿÿ ÿÿÿÿ boyÿÿÿÿ ansÿÿÿÿ
ÿÿÿÿ ÿÿÿÿ ÿÿÿÿd luÿÿÿÿ ÿÿÿÿ ÿÿÿÿos
ÿÿÿÿ CH6ÿÿÿÿD, pÿÿÿÿ
ÿÿÿÿ ÿÿÿÿ 20 ÿÿÿÿh 20ÿÿÿÿ9:39ÿÿÿÿll Pÿÿÿÿ <ÿÿÿÿhrefÿÿÿÿiltoÿÿÿÿl.paÿÿÿÿyahoÿÿÿÿm">bÿÿÿÿpagaÿÿÿÿhoo.ÿÿÿÿ/a>&ÿÿÿÿwrotÿÿÿÿ ÿÿÿÿ ÿÿÿÿ Helÿÿÿÿll,
ÿÿÿÿ &gÿÿÿÿ ÿÿÿÿ; Fiÿÿÿÿed wÿÿÿÿthe ÿÿÿÿade ÿÿÿÿhaveÿÿÿÿ rivÿÿÿÿ theÿÿÿÿter ÿÿÿÿion ÿÿÿÿ in
ÿÿÿÿ &gÿÿÿÿlaceÿÿÿÿthe ÿÿÿÿe asÿÿÿÿyet.ÿÿÿÿ quiÿÿÿÿild ÿÿÿÿckerÿÿÿÿckerÿÿÿÿke sÿÿÿÿ ÿÿÿÿt; oÿÿÿÿs haÿÿÿÿe hoÿÿÿÿfor ÿÿÿÿwingÿÿÿÿts iÿÿÿÿe caÿÿÿÿthroÿÿÿÿsligÿÿÿÿ outÿÿÿÿ ÿÿÿÿ ÿÿÿÿ; shÿÿÿÿ Myÿÿÿÿstioÿÿÿÿ shoÿÿÿÿI moÿÿÿÿthe ÿÿÿÿy thÿÿÿÿh onÿÿÿÿhe wÿÿÿÿspa
ÿÿÿÿ r
ÿÿÿÿ &gÿÿÿÿut oÿÿÿÿe plÿÿÿÿand ÿÿÿÿ theÿÿÿÿolesÿÿÿÿsizeÿÿÿÿwaitÿÿÿÿil Iÿÿÿÿtallÿÿÿÿ
ÿÿÿÿgt; ÿÿÿÿs onÿÿÿÿ plaÿÿÿÿith ÿÿÿÿcarrÿÿÿÿrougÿÿÿÿveteÿÿÿÿ plaÿÿÿÿ Howÿÿÿÿficuÿÿÿÿ ÿÿÿÿ ÿÿÿÿ is ÿÿÿÿo reÿÿÿÿheseÿÿÿÿes wÿÿÿÿthe ÿÿÿÿer sÿÿÿÿon iÿÿÿÿlledÿÿÿÿoks ÿÿÿÿ i
ÿÿÿÿ t
ÿÿÿÿ >ÿÿÿÿuld ÿÿÿÿiffiÿÿÿÿ to ÿÿÿÿand ÿÿÿÿ reaÿÿÿÿem wÿÿÿÿthe ÿÿÿÿer sÿÿÿÿon oÿÿÿÿ ÿÿÿÿ
ÿÿÿÿgt; ÿÿÿÿ outÿÿÿÿthe ÿÿÿÿe isÿÿÿÿre aÿÿÿÿnce ÿÿÿÿ theÿÿÿÿll hÿÿÿÿto bÿÿÿÿdoneÿÿÿÿ &ÿÿÿÿwhenÿÿÿÿ is ÿÿÿÿalleÿÿÿÿ theÿÿÿÿne? ÿÿÿÿorryÿÿÿÿut wÿÿÿÿer tÿÿÿÿs wiÿÿÿÿo
ÿÿÿÿve
ÿÿÿÿ >ÿÿÿÿightÿÿÿÿhen ÿÿÿÿvet ÿÿÿÿll tÿÿÿÿher.ÿÿÿÿen oÿÿÿÿurseÿÿÿÿh thÿÿÿÿles
ÿÿÿÿ &gÿÿÿÿlreaÿÿÿÿeameÿÿÿÿ wouÿÿÿÿauseÿÿÿÿngs ÿÿÿÿe ouÿÿÿÿ shaÿÿÿÿgainÿÿÿÿope ÿÿÿÿ
ÿÿÿÿgt; ÿÿÿÿlearÿÿÿÿ ÿÿÿÿ
ÿÿÿÿgt;
ÿÿÿÿ &gÿÿÿÿBillÿÿÿÿ=E1nÿÿÿÿ ÿÿÿÿ
ÿÿÿÿgt; ÿÿÿÿ ÿÿÿÿ
ÿÿÿÿ====ÿÿÿÿ==
ÿÿÿÿ ===ÿÿÿÿ====ÿÿÿÿ =ÿÿÿÿ====ÿÿÿÿ ÿÿÿÿ====ÿÿÿÿ
ÿÿÿÿgt; ÿÿÿÿ ÿÿÿÿ
ÿÿÿÿgt;
ÿÿÿÿ
<ÿÿÿÿckquÿÿÿÿ<ÿÿÿÿcentÿÿÿÿhr sÿÿÿÿ1>Mesÿÿÿÿ 6<ÿÿÿÿtablÿÿÿÿrderÿÿÿÿellpÿÿÿÿng=0ÿÿÿÿr>ÿÿÿÿ ÿÿÿÿXÿÿÿÿÿÿÿÿBackÿÿÿÿMainÿÿÿÿEX
ÿÿÿÿÿÿÿÿÿÿÿÿt siÿÿÿÿ1 faÿÿÿÿimesÿÿÿÿ Romÿÿÿÿ <ÿÿÿÿEVIOÿÿÿÿfontÿÿÿÿ>ÿÿÿÿp toÿÿÿÿVIOUÿÿÿÿssagÿÿÿÿont>ÿÿÿÿ ÿÿÿÿ><ÿÿÿÿli><ÿÿÿÿEF="ÿÿÿÿSAGEÿÿÿÿfontÿÿÿÿe=-1ÿÿÿÿe=TiÿÿÿÿNew ÿÿÿÿn> ÿÿÿÿb>NEÿÿÿÿfontÿÿÿÿ>ÿÿÿÿp toÿÿÿÿT Meÿÿÿÿeÿÿÿÿ
<ÿÿÿÿtd><ÿÿÿÿa hrÿÿÿÿmailÿÿÿÿenitÿÿÿÿ-lisÿÿÿÿtronÿÿÿÿcom?ÿÿÿÿect=ÿÿÿÿZeniÿÿÿÿ1-LiÿÿÿÿTestÿÿÿÿont ÿÿÿÿ=-1 ÿÿÿÿ=Timÿÿÿÿew Rÿÿÿÿ> ÿÿÿÿÿÿÿÿReplÿÿÿÿ LISÿÿÿÿgardÿÿÿÿthisÿÿÿÿsageÿÿÿÿnt><ÿÿÿÿ/a><ÿÿÿÿÿÿÿÿ>SENÿÿÿÿ/fonÿÿÿÿb><ÿÿÿÿfontÿÿÿÿe=-1ÿÿÿÿe=TiÿÿÿÿNew ÿÿÿÿn><ÿÿÿÿ/a><ÿÿÿÿ<ÿÿÿÿÿÿÿÿt siÿÿÿÿ facÿÿÿÿimesÿÿÿÿ romÿÿÿÿtimeÿÿÿÿolorÿÿÿÿf000ÿÿÿÿb><ÿÿÿÿ/fonÿÿÿÿtd><ÿÿÿÿ<ÿÿÿÿidthÿÿÿÿ%" aÿÿÿÿ="leÿÿÿÿ<ÿÿÿÿ sizÿÿÿÿfaceÿÿÿÿmes ÿÿÿÿromaÿÿÿÿimesÿÿÿÿlor=ÿÿÿÿ0000ÿÿÿÿom: ÿÿÿÿ><ÿÿÿÿrlosÿÿÿÿ<ÿÿÿÿref=ÿÿÿÿlto:ÿÿÿÿossaÿÿÿÿmailÿÿÿÿ">caÿÿÿÿsa52ÿÿÿÿil.cÿÿÿÿa>&gÿÿÿÿi>ÿÿÿÿt siÿÿÿÿ facÿÿÿÿimesÿÿÿÿ romÿÿÿÿtimeÿÿÿÿolorÿÿÿÿ0700ÿÿÿÿi>ÿÿÿÿÿÿÿÿnt><ÿÿÿÿjayÿÿÿÿist@ÿÿÿÿom>ÿÿÿÿ ÿÿÿÿ To:ÿÿÿÿith6ÿÿÿÿist ÿÿÿÿÿÿÿÿ<ÿÿÿÿfontÿÿÿÿe=Times New Roman>Message 7
INDEX Back to Main INDEX PREVIOUS Skip to PREVIOUS Message NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 09:12:35 AM PST US
From: Bill Naumuk <naumuk@windstream.net>
Subject: Re: Test
On 03/20/2011 11:34 AM, jaybannist@cs.com wrote:
> Bill, What would you think if I said you can't post. (;>0 - Jay
>
> Do not archive.
>
>
> -----Original Message-----
> From: Bill Naumuk <naumuk@windstream.net>
> To: Zenith601-list <Zenith601-list@matronics.com>
> Sent: Sun, Mar 20, 2011 10:05 am
> Subject: Zenith601-List: Test
>
> --> Zenith601-List message posted by: Bill Naumuk<naumuk@windstream.net <mailto:naumuk@windstream.net>>
>
>
> A check to see whether I can post.
>
>
> ==========
>
>
> " target="_blank">http://www.matronics.com/Navigator?Zenith601-List
>
>
> ==========
>
>
> tp://forums.matronics.com
>
>
> ==========
>
>
> _blank">http://www.matronics.com/contribution
>
>
> ==========
>
>
> *
>
>
> *
I'd have verification that my connection to the Matronics list, which I
lost last year, has been reestablished. How is beyond me, considering
that no faults showed up on the Matronics troubleshooter.
For those that are going to Oshkosh, I'll see y'all there.
Bill
Message 8
INDEX Back to Main INDEX PREVIOUS Skip to PREVIOUS Message NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 09:35:31 AM PST US
From: Paul Mulwitz <psm@att.net>
Subject: Re: Wing Bolts
Hi Bill,
The first time (before the upgrade kit was designed) I tried drilling
and reaming the mounting holes with the carry through in place.
Actually, I had so much trouble with the drilling I never got to the
reaming. It was nearly impossible to get a drill of any kind (capable
of such large drill bits) in place to drill with the fuselage sides and
the seat parts in the way.
This time, when installing the whole thing after upgrade, I am going to
drill, ream, and inspect the mounting holes with the carry through out
of the fuselage. I don't know how much problem I will have installing
it after the finished holes are done, but I thing the first attempt
resulted in something that was not airworthy. Indeed, I replaced the
caps in the carry through and all 4 uprights to try to make things right.
If you are still considering this problem in a couple of weeks then let
me know. I should be finished by then.
Paul
Working in final stages of installing the carry through - wings completed.
On 3/20/2011 6:39 AM, Bill Pagan wrote:
> Hello All,
> Finished with the upgrade but have not riveted the center section back
> in place in the plane as of yet. My quickbuild (snicker-snicker) like
> some others has the holes for the wing bolts in the carry through
> slightly out of shape. My question is should I mount the carry
> through onto the wing spar out of the plane and ream these holes to
> size or wait until I install the wings on the plane with the carry
> through riveted in place. How difficult is it to ream these holes
> with the center section installed (looks like it would be difficult to
> me) and if I ream them with the center section on the wing out of the
> plane is there a chance that they will have to be redone when all is
> installed on the plane? I worry about whether things will move
> slightly when I rivet it all together. Then of course with the holes
> already reamed it would cause things to be out of shape again. Hope
> this is clear.
>
> /Bill Pagn/
>
>
> *
>
>
> *
Other Matronics Email List Services
Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Zenith601-List Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.