Zenith601-List Digest Archive

Sun 01/15/12


Total Messages Posted: 4



Today's Message Index:
----------------------
 
     1. 05:41 PM - Help on Wing locker hinge after upgrade.. (andrewtub)
     2. 06:13 PM - Re: Help on Wing locker hinge after upgrade.. (Afterfxllc@aol.com)
     3. 06:27 PM - Re: Help on Wing locker hinge after upgrade.. (andrewtub)
     4. 10:38 PM - Re: Help on Wing locker hinge after upgrade.. (Jonathan@Entry.co.za)
 
 
 


Message 1



  • 					INDEX
    		•  Back to Main INDEX
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 05:41:13 PM PST US
    Subject: Help on Wing locker hinge after upgrade..
    From: "andrewtub" <andrewtub@yahoo.com>
          
      
      Before the upgrade the wing locker hinge was mounted on the bottom side of the
      original L angle (3/4" and .032" thick ) on the upper aft side of the wing spare.
      Now that L angle is replaced with the with the extruded L angle (1" and 1/8"
      thick)  and my original locker hinge is not fitting.
      
      Can you guys give me some ideas on how you made this work.
      
      Thanks
      Andrew
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=363925#363925
      
      


    Message 2

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 06:13:26 PM PST US
    From: Afterfxllc@aol.com
    Subject: Re: Help on Wing locker hinge after upgrade..
          
      flip the hinge over.
      
      
      In a message dated 1/15/2012 8:41:48 P.M. Eastern Standard Time,  
      andrewtub@yahoo.com writes:
      
      -->  Zenith601-List message posted by: "andrewtub"  <andrewtub@yahoo.com>
      
      Before the upgrade the wing locker hinge  was mounted on the bottom side of 
      the original L angle (3/4" and .032" thick )  on the upper aft side of the 
      wing spare.  Now that L angle is replaced  with the with the extruded L 
      angle (1" and 1/8" thick)  and my original  locker hinge is not fitting.
      
      Can you guys give me some ideas on how you  made this work.
      
      Thanks
      Andrew
      
      
      Read this topic  online  here:
      
      http://forums.matronics.com/viewtopic.php?p=363925#363925
      
      


    Message 3

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 06:27:31 PM PST US
    Subject: Re: Help on Wing locker hinge after upgrade..
    From: "andrewtub" <andrewtub@yahoo.com>
          
      
      [quote="Afterfxllc(at)aol.com"]flip the hinge over.
      
        In a message dated 1/15/2012 8:41:48 P.M. Eastern Standard Time,  andrewtub@yahoo.com
      writes:
      
      > -->    Zenith601-List message posted by: "andrewtub"    
      > 
      > Before the upgrade the wing locker hinge    was mounted on the bottom side of
      the original L angle (3/4" and .032" thick )    on the upper aft side of the
      wing spare.  Now that L angle is replaced    with the with the extruded L angle
      (1" and 1/8" thick)  and my original    locker hinge is not fitting.
      > 
      > Can you guys give me some ideas on how you    made this work.
      > 
      > Thanks
      > Andrew
      > 
      > 
      > 
      > 
      > Read this topic    online    here:
      > 
      > http://forums.matronics.com/viewtopic.php?p=363925#363925
      > 
      > 
      > 
      
      
      > [b]
      
      
      Thanks, that was my first thought.  Just want to see if anyone got creative on
      this.
      
      AT
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=363931#363931
      
      


    Message 4

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 10:38:10 PM PST US
    From: "Jonathan@Entry.co.za" <jonathan@entry.co.za>
    Subject: Re: Help on Wing locker hinge after upgrade..
          
      Yep that is what I did as well, adfded benifit is it opens wider...
      
      Jonathan
        ----- Original Message ----- 
        From: Afterfxllc@aol.com 
        To: zenith601-list@matronics.com 
        Sent: Monday, January 16, 2012 4:10 AM
        Subject: Re: Zenith601-List: Help on Wing locker hinge after upgrade..
      
      
        flip the hinge over.
      
        In a message dated 1/15/2012 8:41:48 P.M. Eastern Standard Time, 
      andrewtub@yahoo.com writes:
      <andrewtub@yahoo.com>
      
          Before the upgrade the wing locker hinge was mounted on the bottom 
      side of the original L angle (3/4" and .032" thick ) on the upper aft 
      side of the wing spare.  Now that L angle is replaced with the with the 
      extruded L angle (1" and 1/8" thick)  and my original locker hinge is 
      not fitting.
      
          Can you guys give me some ideas on how you made this work.
      
          Thanks
          Andrew
      
      
          Read this topic online here:
      
          http://forums.matronics.com/viewtopic.php?p=363925#363925
      
      
      -------------------------------------------------------------------------
      -----
      
        No virus found in this message.
        Checked by AVG - www.avg.com
      01/15/12
      

    

    


    

    

    

    

    Other Matronics Email List Services
    

    

    

    


  • Post A New Message
    		•   zenith601-list@matronics.com
    

  • UN/SUBSCRIBE
    		•   http://www.matronics.com/subscription
    

  • List FAQ
    		•   http://www.matronics.com/FAQ/Zenith601-List.htm
    

  • Web Forum Interface To Lists
    		•   http://forums.matronics.com
    

  • Matronics List Wiki
    		•   http://wiki.matronics.com
    

  • 7-Day List Browse
    		•   http://www.matronics.com/browse/zenith601-list
    

  • Browse Zenith601-List Digests
    		•   http://www.matronics.com/digest/zenith601-list
    

  • Browse Other Lists
    		•   http://www.matronics.com/browse
    

  • Live Online Chat!
    		•   http://www.matronics.com/chat
    

  • Archive Downloading
    		•   http://www.matronics.com/archives
    

  • Photo Share
    		•   http://www.matronics.com/photoshare
    

  • Other Email Lists
    		•   http://www.matronics.com/emaillists
    

  • Contributions
    		•   http://www.matronics.com/contribution
    



    

    


    

    


    
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.


    

    

-- Please support this service by making your Contribution today! --