---------------------------------------------------------- Zenith601-List Digest Archive --- Total Messages Posted Mon 06/11/12: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:13 AM - bushings (Carlos Sa) 2. 09:34 AM - Re: bushings (Jay Bannister) 3. 09:37 AM - Re: bushings (JohnDRead@aol.com) 4. 10:02 AM - Re: bushings (Carlos Sa) 5. 10:32 AM - Re: bushings (Jon Croke) 6. 10:43 AM - Re: bushings (Carlos Sa) ________________________________ Message 1 _____________________________________ Time: 09:13:47 AM PST US From: Carlos Sa Subject: Zenith601-List: bushings Hello, Some time ago - but I think this year - somebody posted some information about bushings. I spent a long while searching, but couldn't find neither the post nor the product. Does anybody remember it? ...and while I have your attention: the upper and lower rudder hinges have different size holes (1/4" and 3/16" respectively), but the bushing is 1/4" for both...?? Thanks Carlos ________________________________ Message 2 _____________________________________ Time: 09:34:11 AM PST US Subject: Re: Zenith601-List: bushings From: Jay Bannister Carlos, The "fork" parts of the hinges have a 3/16" hole, for a AN3 bolt. The "ton gue" parts of the hinges have a 1/4" hole for the 1/4" bushing. The bolt c lamps the bushing between the "fork" parts to make a fixed "hole" for the " tongue" part to rotate around. Drawing 6-S-5 for the 501XL shows this very clearly. Jay -----Original Message----- From: Carlos Sa @matronics.com>; zenith750-list Sent: Mon, Jun 11, 2012 11:15 am Subject: Zenith601-List: bushings Hello, Some time ago - but I think this year - somebody posted some information ab out bushings. I spent a long while searching, but couldn't find neither the post nor the product. Does anybody remember it? ...and while I have your attention: the upper and lower rudder hinges have different size holes (1/4" and 3/16" respectively), but the bushing is 1/4" for both...?? Thanks Carlos ________________________________ Message 3 _____________________________________ Time: 09:37:10 AM PST US From: JohnDRead@aol.com Subject: Re: Zenith601-List: bushings Hi Carlos, Attached are the changes I made to the rudder bearings on my 701. Regards, John CH701 - Colorado - Jabiru 3300 Cell: 719-494-4567 Home: 303-648-3261 In a message dated 6/11/2012 10:14:14 A.M. Mountain Daylight Time, carlossa52@gmail.com writes: Hello, Some time ago - but I think this year - somebody posted some information about bushings. I spent a long while searching, but couldn't find neither the post nor the product. Does anybody remember it? ...and while I have your attention: the upper and lower rudder hinges have different size holes (1/4" and 3/16" respectively), but the bushing is 1/4" for both...?? Thanks Carlos (http://www.matronics.com/Navigator?Zenith601-List) (http://www.matronics.com/contribution) ________________________________ Message 4 _____________________________________ Time: 10:02:14 AM PST US From: Carlos Sa Subject: Re: Zenith601-List: bushings John, thanks much for this! I might go this way - but this is not what I was looking for... I think the bushing this gentleman was talking about was something involving bronze and teflon... Cheers Carlos On 11 June 2012 12:36, wrote: > ** > Hi Carlos, > Attached are the changes I made to the rudder bearings on my > 701. > > Regards, John > > CH701 - Colorado - Jabiru 3300 > > Cell: 719-494-4567 > Home: 303-648-3261 > > In a message dated 6/11/2012 10:14:14 A.M. Mountain Daylight Time, > carlossa52@gmail.com writes: > > Hello, > > Some time ago - but I think this year - somebody posted some information > about bushings. > I spent a long while searching, but couldn't find neither the post nor the > product. > > Does anybody remember it? > > ...and while I have your attention: the upper and lower rudder hinges have > different size holes (1/4" and 3/16" respectively), but the bushing is 1/4" > for both...?? > > Thanks > > > Carlos > > * > > href="http://www.matronics.com/Navigator?Zenith601-List">http://www.matronics.com/Navigator?Zenith601-Lists.matronics.com/">http://forums.matronics.com > p://www.matronics.com/contribution">http://www.matronics.com/contribution > * > > ________________________________ Message 5 _____________________________________ Time: 10:32:07 AM PST US From: "Jon Croke" Subject: RE: Zenith601-List: bushings I think Larry Zepp had an article on bushings in the last Zenair Newsletter. From: owner-zenith601-list-server@matronics.com [mailto:owner-zenith601-list-server@matronics.com] On Behalf Of Carlos Sa Sent: Monday, June 11, 2012 1:01 PM Subject: Re: Zenith601-List: bushings John, thanks much for this! I might go this way - but this is not what I was looking for... I think the bushing this gentleman was talking about was something involving bronze and teflon... ________________________________ Message 6 _____________________________________ Time: 10:43:54 AM PST US From: Carlos Sa Subject: Re: Zenith601-List: bushings BINGO ! ! ! mscdirect.com , PN 00458430 and 00458455 thanks a bunch, Jon Carlos On 11 June 2012 13:30, Jon Croke wrote: > I think Larry Zepp had an article on bushings in the last Zenair > Newsletter.**** > > ** ** > > *From:* owner-zenith601-list-server@matronics.com [mailto: > owner-zenith601-list-server@matronics.com] *On Behalf Of *Carlos Sa > *Sent:* Monday, June 11, 2012 1:01 PM > *To:* zenith601-list@matronics.com > *Subject:* Re: Zenith601-List: bushings**** > > ** ** > > John, thanks much for this! > > I might go this way - but this is not what I was looking for... I think > the bushing this gentleman was talking about was something involving bronze > and teflon... > > > ** > > * * > > * > > * > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.