---------------------------------------------------------- Zenith601-List Digest Archive --- Total Messages Posted Wed 03/27/13: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:34 AM - Re: Re: Seat backs (Bryan Martin) 2. 08:17 AM - Re: Rib Forming Blocks (paul baker) ________________________________ Message 1 _____________________________________ Time: 02:34:01 AM PST US Subject: Re: Zenith601-List: Re: Seat backs From: Bryan Martin I built a mock-up of the seat from wood so I could test the seat design. I used the mock-up to build up the seat foam pieces and glue them together before I took them in to the upholsterer. It was easier than trying to do it in the cockpit itself. -- Bryan Martin N61BM, CH 601 XL, RAM Subaru, Stratus re-drive. On Mar 26, 2013, at 7:48 PM, Tim Juhl wrote: > I should have asked this question at the start but here goes. I haven't crawled into my fuselage yet (think I'll wait until it is on the gear) but was curious about the optimum height of the seat back. I'm 6'1" tall, so can anyone suggest how much, if any, I should extend the seat back above the top support? With the laid-back orientation of the Zodiac seat I would think that some head support would be in order. > > Thanks! ________________________________ Message 2 _____________________________________ Time: 08:17:22 AM PST US From: "paul baker" Subject: Re: Zenith601-List: Rib Forming Blocks not the same subject..but I had a friend that started building a 601xl a few years back. It was a 51% kit with all options.Unfortunitly, he became ill after starting the =9CB=9D mods. An a&p ai has finished the plane and now it it ready to be registered,but the owner has died. The family is now offering the finished plane for some one to buy and get the final inspection and certification. The plane is brand new with a brand new jabiru 120hp,dynon Efis-100,grandrapids eis,garmin tr sl 40,garmin gtx 327 transponder. Everything is 0 time , the engine has been started and checked out. the family is highly motivated to move the airplane and is willing to give someone a great deal. Well over $60.000 in material alone . They are asking $39.ooo for openers and are willing to deal. The plane is located at Sugar Valley apt near Mocksville nc. Call me paul baker at 704-664-2273. I have owned two 601s with over 400 pleasant hours in mine. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message zenith601-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Zenith601-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/zenith601-list Browse Digests http://www.matronics.com/digest/zenith601-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.