Today's Message Index:
----------------------
1. 07:07 PM - Re: Rudder Pedal Travel (Mark Hubelbank)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rudder Pedal Travel |
Tim,
I expect you have already received this from someone but I just
found the note. On mine, with both peddles at the same position, they
are 6 1/8 inch from the aft side (seat side) of the peddle bar to the
firewall.
At the extreme rudder deflection, the distances are 8 5/8 and 4 1/4
inches for the two peddles. This may be slightly closer to the firewall
than some would do it. I have a tall friend who flies with me and I
moved the peddles as far forward as possible.
On 04/13/2013 10:26 PM, Mark Hubelbank wrote:
> Tim,
> I take it you don't have cables to the rudder yet as there is a
> specification for rudder travel. I will be at the airport tomorrow and
> can look at mine.
>
>
> On 04/13/2013 4:33 PM, Tim Juhl wrote:
>>
>> I did a search but could not find this info. I'm trying to decide
>> where to set my rudder pedals and need to know how much they travel
>> forward from the neutral position when fully deflected (nose gear and
>> rudder cables attached.) With this info I'll be able to adjust for
>> maximum legroom without worrying about running out of rudder or
>> ground steering.
>>
>> Thanks!
>>
>> Tim
>>
>> --------
>> ______________
>> CFII
>> Champ L16A flying
>> Zodiac XL - Jabiru 3300A
>> Wing modifications done - back working on the fuselage
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=398555#398555
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
--
Mark Hubelbank
NorthEast Monitoring
2 Clock Tower Place
Suite 555
Maynard, MA, 01754 - USA
mhubel@nemon.com
978-443-3955
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|