Today's Message Index:
----------------------
1. 05:39 AM - Re: Zenith601-List Digest: 1 Msgs - 04/24/18 (dwbbrown@gmail.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Zenith601-List Digest: 1 Msgs - 04/24/18 |
I also use a bore scope and a close eye inspection at annual. Also I have always
given a gentle up and down shake to the horizontal stabilizer as part of every
preflight.
David
601XLB
Sent from my iPad
> On Apr 25, 2018, at 01:48, Zenith601-List Digest Server <zenith601-list@matronics.com>
wrote:
>
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Zenith601-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Zenith601-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-04-24&Archive=Zenith601
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-04-24&Archive=Zenith601
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Zenith601-List Digest Archive
> ---
> Total Messages Posted Tue 04/24/18: 1
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 08:05 AM - Re: Zenith601-List Digest: 2 Msgs - 04/23/18 (Comcast)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 08:05:48 AM PST US
> From: Comcast <4rcsimmons@comcast.net>
> Subject: Zenith601-List: Re: Zenith601-List Digest: 2 Msgs - 04/23/18
>
>
> I use a bore scope to get a good look. My brackets are painted so if a crack
appears,
> it should show by means of broken paint.
>
> I do look now at every oil change.
>
> Mine fit snug during assembly so I dont believe there is unintended stress.
>
> I do keep my eye open for it though
>
> - Rich
>
>>> On Apr 24, 2018, at 1:47 AM, Zenith601-List Digest Server <zenith601-list@matronics.com>
>> wrote:
>>
>> *
>>
>> ================================================
>> Online Versions of Today's List Digest Archive
>> ================================================
>>
>> Today's complete Zenith601-List Digest can also be found in either of the
>> two Web Links listed below. The .html file includes the Digest formatted
>> in HTML for viewing with a web browser and features Hyperlinked Indexes
>> and Message Navigation. The .txt file includes the plain ASCII version
>> of the Zenith601-List Digest and can be viewed with a generic text editor
>> such as Notepad or with a web browser.
>>
>> HTML Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-04-23&Archive=Zenith601
>>
>> Text Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-04-23&Archive=Zenith601
>>
>>
>> ==============================================
>> EMail Version of Today's List Digest Archive
>> ==============================================
>>
>>
>> ----------------------------------------------------------
>> Zenith601-List Digest Archive
>> ---
>> Total Messages Posted Mon 04/23/18: 2
>> ----------------------------------------------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> 1. 06:56 AM - Horizontal Stabilizer Safety Bulletin 2017 (Bobby Paulk)
>> 2. 07:51 AM - Re: Horizontal Stabilizer Safety Bulletin 2017 (Paul Mulwitz)
>>
>>
>>
>> ________________________________ Message 1 _____________________________________
>>
>>
>> Time: 06:56:14 AM PST US
>> From: Bobby Paulk <bobbypaulk@comcast.net>
>> Subject: Zenith601-List: Horizontal Stabilizer Safety Bulletin 2017
>>
>> Re: Horizontal Stabilizer Safety Bulletin 2017
>>
>>
>> While doing my "Condition" Inspection I found out about the cracked attach brackets
>> on the Zodiac. I examined all the visible ones very carefully and found no
>> problems. I believe the cracking is due to very poor workmanship and using an
>> over sized washer that extended into the curved radius of the bend in the metal.
>> The photos on the site are a sign of very poor workmanship and not a design
>> problem. My plane was built using the fast build kit and the Horizontal Stabilizer
>> spar and attach fittings came assembled from the factory.
>>
>> I would like to know what most builders are doing about the 2 angles inside
the
>> skin. At this time I do not believe I will remove and cut the hole to examine
>> them.
>>
>> Any input from builders would be appreciated.
>>
>> Thank You
>>
>>
>> Bobby
>>
>> Zodiac 601 "B"
>>
>> Jabiru 3300 295 hrs.
>>
>> ________________________________ Message 2 _____________________________________
>>
>>
>> Time: 07:51:32 AM PST US
>> Subject: Re: Zenith601-List: Horizontal Stabilizer Safety Bulletin 2017
>> From: Paul Mulwitz <psm@att.net>
>>
>> I'm not sure I understand the attach bracket problem. That said, I
>> didn't like the way the 4 aluminum parts holding the horizontal
>> stabilizer in place on my Zodiac XL were performing. The stabilizer
>> could be moved easily by applying force on the end. So I changed them
>> to steel. The stabilizer is firmly attached on my plane.
>>
>> We should remember there was no revision control on the Zodiac XL
>> changes. It is possible that each one of the thousand copies of this
>> design is different from the others.
>>
>> Paul
>> Camas, WA
>> CH601 XL (I installed the upgrade but didn't change the part number to
>> "B". My plane was already registered when Zenith decided the upgrade
>> changed the part number.)
>>
>>> On 4/23/2018 6:53 AM, Bobby Paulk wrote:
>>>
>>> Re: Horizontal Stabilizer Safety Bulletin 2017
>>>
>>>
>>> While doing my "Condition" Inspection I found out about the cracked
>>> attach brackets on the Zodiac. I examined all the visible ones very
>>> carefully and found no problems. I believe the cracking is due to very
>>> poor workmanship and using an over sized washer that extended into the
>>> curved radius of the bend in the metal. The photos on the site are a
>>> sign of very poor workmanship and not a design problem. My plane was
>>> built using the fast build kit and the Horizontal Stabilizer spar and
>>> attach fittings came assembled from the factory.
>>>
>>> I would like to know what most builders are doing about the 2 angles
>>> inside the skin. At this time I do not believe I will remove and cut
>>> the hole to examine them.
>>>
>>> Any input from builders would be appreciated.
>>>
>>> Thank You
>>>
>>>
>>> Bobby
>>>
>>> Zodiac 601 "B"
>>>
>>> Jabiru 3300 295 hrs.
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|