Zenith601-List Digest Archive

Fri 04/27/18


Total Messages Posted: 2



Today's Message Index:
----------------------
 
     1. 05:00 AM - Jabiru Starter (Bobby Paulk)
     2. 07:04 PM - Re: Zenith601-List Digest: 1 Msgs - 04/26/18 (dwbbrown@gmail.com)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:00:22 AM PST US
    From: Bobby Paulk <bobbypaulk@comcast.net>
    Subject: Jabiru Starter
    Bill I had the same problem as you describe. I purchased a new starter from Camit while they were around - not sure it's still Bosch. I was told that the bolts holding the motor to the aluminum adapter would loosen causing the problem. Checking the bolts is now on my inspection list. I put lock nuts and witness paint on them to keep the problem from happening again. Bobby Zodiac 601 Jabiru 3300 295 hrs


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:04:31 PM PST US
    Subject: Re: Zenith601-List Digest: 1 Msgs - 04/26/18
    From: dwbbrown@gmail.com
    Bill, My Jabiru is about 10 years old, 825 hours, with none of the problems you described David Sent from my iPad > On > Time: 12:17:41 PM PST US > From: "William Page" <FrontPage@rcn.com> > Subject: Zenith601-List: Zenith601 Jabiru Starter Trashed > > > Zodiac Forum Members, > > My Bosch starter on my Jabiru 3300, Zodiac 601 failed after mostly ground > runs and very little flight time. > The pinion gear moved on its shaft and began grinding away at the aluminum > housing until the bendix would no longer activate. > Obviously this condition had been occurring for some time as the steel gear > milled out two notches in the nose housing. > I need a new housing but wonder how to prevent the same defect from > occurring again. I don't see any thing that would prevent the pinion from > sliding out again. > Has anyone on the forum had experience with this? > > Bill Page > Zodiac 601HDS with early Jabiru 3300 > (FrontPage@rcn.com) > Pennsylvania > > -----Original Message----- > From: Zenith601-List Digest Server > Sent: Thursday, April 26, 2018 2:48 AM > Subject: Zenith601-List Digest: 1 Msgs - 04/25/18 > > * > > > ============================================== > EMail Version of Today's List Digest Archive > ============================================== > > > ---------------------------------------------------------- > Zenith601-List Digest Archive > --- > Total Messages Posted Wed 04/25/18: 1 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 05:39 AM - Re: Zenith601-List Digest: 1 Msgs - 04/24/18 > (dwbbrown@gmail.com) > > > ________________________________ Message 1 > _____________________________________ > > > Time: 05:39:34 AM PST US > Subject: Zenith601-List: Re: Zenith601-List Digest: 1 Msgs - 04/24/18 > From: dwbbrown@gmail.com > > > I also use a bore scope and a close eye inspection at annual. Also I have > always > given a gentle up and down shake to the horizontal stabilizer as part of > every > preflight. > David > 601XLB > > Sent from my iPad > >> On Apr 25, 2018, at 01:48, Zenith601-List Digest Server >> <zenith601-list@matronics.com> > wrote: >> >> * >> >> =============================================== >> Online Versions of Today's List Digest Archive >> =============================================== >> >> Today's complete Zenith601-List Digest can also be found in either of the >> two Web Links listed below. The .html file includes the Digest formatted >> in HTML for viewing with a web browser and features Hyperlinked Indexes >> and Message Navigation. The .txt file includes the plain ASCII version >> of the Zenith601-List Digest and can be viewed with a generic text editor >> such as Notepad or with a web browser. >> >> HTML Version: >> >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter >> 18-04-24&Archive=Zenith601 >> >> Text Version: >> >> >> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter >> 18-04-24&Archive=Zenith601 >> >> >> ============================================= >> EMail Version of Today's List Digest Archive >> ============================================= >> >> >> ---------------------------------------------------------- >> Zenith601-List Digest Archive >> --- >> Total Messages Posted Tue 04/24/18: 1 >> ---------------------------------------------------------- >> >> >> Today's Message Index: >> ---------------------- >> >> 1. 08:05 AM - Re: Zenith601-List Digest: 2 Msgs - 04/23/18 (Comcast) >> >> >> ________________________________ Message 1 >> _____________________________________ >> >> >> Time: 08:05:48 AM PST US >> From: Comcast <4rcsimmons@comcast.net> >> Subject: Zenith601-List: Re: Zenith601-List Digest: 2 Msgs - 04/23/18 >> >> >> I use a bore scope to get a good look. My brackets are painted so if a >> crack > appears, >> it should show by means of broken paint. >> >> I do look now at every oil change. >> >> Mine fit snug during assembly so I dont believe there is unintended >> stress. >> >> I do keep my eye open for it though >> >> - Rich >> >>>> On Apr 24, 2018, at 1:47 AM, Zenith601-List Digest Server >>>> <zenith601-list@matronics.com> >>> wrote: >>> >>> * >>> >>> ============================================== >>> Online Versions of Today's List Digest Archive >>> ============================================== >>> >>> Today's complete Zenith601-List Digest can also be found in either of the >>> two Web Links listed below. The .html file includes the Digest formatted >>> in HTML for viewing with a web browser and features Hyperlinked Indexes >>> and Message Navigation. The .txt file includes the plain ASCII version >>> of the Zenith601-List Digest and can be viewed with a generic text editor >>> such as Notepad or with a web browser. >>> >>> HTML Version: >>> >>> >>> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter >>> 18-04-23&Archive=Zenith601 >>> >>> Text Version: >>> >>> >>> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter >>> 18-04-23&Archive=Zenith601 >>> >>> >>> ============================================ >>> EMail Version of Today's List Digest Archive >>> ============================================ >>> >>> >>> ---------------------------------------------------------- >>> Zenith601-List Digest Archive >>> --- >>> Total Messages Posted Mon 04/23/18: 2 >>> ---------------------------------------------------------- >>> >>> >>> Today's Message Index: >>> ---------------------- >>> >>> 1. 06:56 AM - Horizontal Stabilizer Safety Bulletin 2017 (Bobby >>> Paulk) >>> 2. 07:51 AM - Re: Horizontal Stabilizer Safety Bulletin 2017 (Paul >>> Mulwitz) >>> >>> >>> >>> ________________________________ Message 1 >>> _____________________________________ >>> >>> >>> Time: 06:56:14 AM PST US >>> From: Bobby Paulk <bobbypaulk@comcast.net> >>> Subject: Zenith601-List: Horizontal Stabilizer Safety Bulletin 2017 >>> >>> Re: Horizontal Stabilizer Safety Bulletin 2017 >>> >>> >>> While doing my "Condition" Inspection I found out about the cracked >>> attach brackets >>> on the Zodiac. I examined all the visible ones very carefully and found >>> no >>> problems. I believe the cracking is due to very poor workmanship and >>> using an >>> over sized washer that extended into the curved radius of the bend in the >>> metal. >>> The photos on the site are a sign of very poor workmanship and not a >>> design >>> problem. My plane was built using the fast build kit and the Horizontal >>> Stabilizer >>> spar and attach fittings came assembled from the factory. >>> >>> I would like to know what most builders are doing about the 2 angles >>> inside > the >>> skin. At this time I do not believe I will remove and cut the hole to >>> examine >>> them. >>> >>> Any input from builders would be appreciated. >>> >>> Thank You >>> >>> >>> Bobby >>> >>> Zodiac 601 "B" >>> >>> Jabiru 3300 295 hrs. >>> >>> ________________________________ Message 2 >>> _____________________________________ >>> >>> >>> Time: 07:51:32 AM PST US >>> Subject: Re: Zenith601-List: Horizontal Stabilizer Safety Bulletin 2017 >>> From: Paul Mulwitz <psm@att.net> >>> >>> I'm not sure I understand the attach bracket problem. That said, I >>> didn't like the way the 4 aluminum parts holding the horizontal >>> stabilizer in place on my Zodiac XL were performing. The stabilizer >>> could be moved easily by applying force on the end. So I changed them >>> to steel. The stabilizer is firmly attached on my plane. >>> >>> We should remember there was no revision control on the Zodiac XL >>> changes. It is possible that each one of the thousand copies of this >>> design is different from the others. >>> >>> Paul >>> Camas, WA >>> CH601 XL (I installed the upgrade but didn't change the part number to >>> "B". My plane was already registered when Zenith decided the upgrade >>> changed the part number.) >>> >>>> On 4/23/2018 6:53 AM, Bobby Paulk wrote: >>>> >>>> Re: Horizontal Stabilizer Safety Bulletin 2017 >>>> >>>> >>>> While doing my "Condition" Inspection I found out about the cracked >>>> attach brackets on the Zodiac. I examined all the visible ones very >>>> carefully and found no problems. I believe the cracking is due to very >>>> poor workmanship and using an over sized washer that extended into the >>>> curved radius of the bend in the metal. The photos on the site are a >>>> sign of very poor workmanship and not a design problem. My plane was >>>> built using the fast build kit and the Horizontal Stabilizer spar and >>>> attach fittings came assembled from the factory. >>>> >>>> I would like to know what most builders are doing about the 2 angles >>>> inside the skin. At this time I do not believe I will remove and cut >>>> the hole to examine them. >>>> >>>> Any input from builders would be appreciated. >>>> >>>> Thank You >>>> >>>> >>>> Bobby >>>> >>>> Zodiac 601 "B" >>>> >>>> Jabiru 3300 295 hrs. >> >> > > > > > > > >




    Other Matronics Email List Services

  • Post A New Message
  •   zenith601-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Zenith601-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/zenith601-list
  • Browse Zenith601-List Digests
  •   http://www.matronics.com/digest/zenith601-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --