Today's Message Index:
----------------------
1. 01:56 AM - Re: Re: Drawing Revision Record (C Smith)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Drawing Revision Record |
Yes, it is a start. Is it possible for you to copy those pages at full size,
either scan or photo copy? Or I could call Zenair and request an updated
copy of the drawings, compare them and then add notes to the list. I made up
a second copy of my plans for back-up and shop use. It also allows me to
easily pull out sheets for special use. If you can copy and mail to me I
will reimburse you.
This project is in response to your request for a tracking website for plans
errata. What are the errors you have found so far? Christian Tremblay found
some problems with the spar caps as well. (not in my list yet).
C. Smith
-----Original Message-----
Subject: Zenith640-List: Re: Drawing Revision Record
--> <scott_stewart@agilent.com>
Hi Craig,
I looked through my plan set I received in January (s/n 0092) and found
three changes from your list. 640-F-4 is at rev 17, 640-F-39 is at rev 14,
and 640-M-95 is at rev 2. Unfortunately, the plans don't clearly show what
was changed from one revision to the next. We would need to list out the
change number for each part on the pages. Before jumping into this, is this
what you are looking for?
--------
Scott Stewart
s/n: 0092
Building from plans
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|